How to pass the test quickly in subject 2, and how to pass the skill in subject 2.

Knowing these in the subject 2 exam will definitely make your clearance rate up!up!

The driving test subject two test is really difficult, every point is very important, from registration to the test, every point can not be negligent, you have to take a good look at the content of the finishing, see if you are not prepared in place, quickly adjust!

One. Sign up

Ask more friends around you to decide which driving school performs well in all aspects. Find a good driving school and a good instructor to make you easy and happy to learn to drive, and good grades will naturally occur. Aspects to consider are:

2.**；3.Coach: Good to talk, patient or impatient, scolding or not;

4.Coaching Field: Is there any of the five events?

Two. Weekday practice

1.Practice diligently: When various operations become the body's instinct, the exam is not afraid.

2.Method:

1) The coach said various points, and the coach is conditionally requested to follow the car to teach. Because each person has a different height, there will be differences in the points that need to be seen.

2) Thinking: After returning home after practice, think about the reasons for various point operations, why is the left side of the inverted library narrower and the right side of the library? Why can't I see the horizontal line on the side and hit the right circle again? Wait, practicing also requires care.

Three. Prepare for the exam

Simulate the real test room, run 5 items every time to ensure a full score, and mock the test in a car with electronic equipment!

First of all, the coach will follow the car to correct your mistakes and help you adjust; Secondly, there are electronic devices in the car, which will tell you that you are deducting points in the same way as the real exam. When the exam officially starts, you won't be nervous about the scores and points deducted from the electronic device.

Four. On the day of the exam

Certificates: Bring your student ID card and ID card.

If there are three or four people who test the car together and you are not the first to take the test, then master the terrain first and see if others deduct points.

When it's time for your own test, you must slow down, step on the clutch and drive slowly, and adjust quickly if you find that the direction is wrong.

Don't be nervous when you hear about the deductions, because there are two chances to deduct points, and you can pass the exam with 80 points.

Finally, it's really important to have a good attitude!

The points of the second subject are generally dead, as long as you remember the points taught by the coach when you practice, don't be nervous during the exam, just like you usually practice, it's very good.

The exam is a big skill, that is, the mind is stable, don't be nervous, and there is no problem in the general test.

It's enough to play at the level of your usual practice.

Practice more Exams are mostly mindset.

The first test is to reverse the warehouse, because there may be a lot of people, there is a risk of robbing the warehouse and crashing, so it is best to choose the storage location at the back of the queue. As long as it is before entering the warehouse, you can stop and wait. After entering the warehouse, there will be an announcement in the car that reads "The reversing storage test begins".

As long as you follow the usual practice requirements, look at the points, hit the steering wheel, pay attention to the line, especially pay attention to whether the line on both sides will be pressed into the warehouse, which is to be flexible. Because of the difference in the field, I feel that the front is late, and it is not yet at the point but it is going to press the line, so we must quickly hit the steering wheel in advance and make a slight adjustment, as long as the tires do not press the line, they are considered qualified, and no points will be deducted.

If you say "please return to the starting point", it means that you have failed the exam, then you have to adjust your mentality, return to the starting point immediately, and retake the test, don't be nervous at this time, because most people still pass the second chance.

If you park on the side, as long as you don't overwhelm the line when you enter, there is no danger in the rest. The trick is, when you enter the warehouse, you have to slow down the steering wheel, when you find that the left side is very narrow, about to press the line, you can loosen the steering wheel a little back, and then beat the steering wheel to death when you are about to stop. Out of the warehouse must turn on the left turn signal, otherwise deduct ten points.

If you go uphill and fix the point, you will find that the slope is actually not as steep as the slope when we were in driving school, which means that it will be easier. As long as you pay attention to the distance between the tire and the right, don't be too wide (deduct 10 points), don't press the line (directly fail), it doesn't matter if the point is there or not, and it's okay to deduct 10 points. In case the ignition goes out, don't think about anything, start it quickly, and if you start it within three seconds, you will only be deducted 10 points.

Set a good point to start and turn on the left turn signal, otherwise you will be deducted ten points.

If you walk in a curve, you may not see the white line because of the bricks, so you can use the bricks as a line, but the dot should be slightly advanced. The steering wheel is easy to play, the clutch is also easy to press, control the speed, drive slowly, play less and return quickly, then congratulations, the exam must be passed.

After walking the curve, there will be a long road to the right angle, the white lines on both sides of the road must not be overwhelming (overpowering will not be qualified, retest), don't be too excited, the same slowly kill the steering wheel, even if you hit early, you can loosen a little, back to the steering wheel.

After completing the journey, the car broadcasts "The test is complete, please wait for the inspection", and if you are not deducted too many points by the details, it means that you are actually qualified, and you just need to slowly drive the car back to the original point.

Lateral exit turn signal.

Two turn signals in a right-angle turn.

Section 2 to find a point.

1.Reversing into storage:

Right: 3-4 to the right of the bottom of the mirror to kill, early (stretch out your head to see) the dotted line left to the left back a circle, the right front corner of the library disappears to the right to kill, the left corner of the steering wheel back to the right, 2-3 parking in front of the line.

Left: Mirror bottom white 3-4 left killed, early (do not stretch the head) dotted line left to the right back a circle, the left rear wheel into the library does not press the line to the left to kill, the right corner of the steering wheel back to the right, 2-3 parking in front of the line.

2.Side Parking:

Parking: wiper rivets align with the right side of the line (steering wheel at twelve o'clock direction to the ground cut head sign), the right side of the wheel sticker 30, line and steering wheel to stop.

Storage: backwards, look at the right rearview mirror, the left front library corner disappears to the right to kill, look at the left rearview mirror, the right rear library corner disappears to the left back two circles, the left rear wheel is about to press the line to the left to kill, stretch out the head to look at the left front wheel, into the garage parking.

Out of the garage: hit the left to the light, out of the warehouse, the black window grille on the lower right side and the right side of the line coincide to the right to kill, the body timing steering wheel back to the right.

3.Curve driving:

The body is facing the road to enter, the left side of the drum to the right side of the line to the left to play a circle, the driving so that the drum and the line have been overlapping, when the left side of the drum to the left side of the line to the right circle, when the left side of the line in the front window 2 3 (3 4) to the right to play a circle, stretch out to ensure that the left wheel does not press the line.

4.Right Angle Turn:

Hit the left turn signal, the left rivet to the right line, lean on 30, when the lower left corner of the door handle coincides with the corner, hit to the left and turn off the turn signal.

5.Ramp start:

The left rivet to the right line (the middle of the right edge of the dial to the second dotted line), lean on 30, when the right rivet exceeds pole 2 to stop, pull the handbrake (there must be a sound), let go of the handbrake, slowly release the clutch, and when the body vibrates, release the brake and drive out of the test area.

Note: Adjust the seat posture and fasten the seat belt according to the feeling of stepping on the clutch when you get into the car, turn the signal three times, and do not stop in the middle.

Slope up to 30, counting the left edge of the second dashed line from the right.

The left edge of the second dashed line is counted on the left side of the inverted pair.

Subject 2: Quick Pass Skills:

1. Close the door, adjust the seat and rearview mirror to return, fasten the seat belt before the late start and turn on the left turn signal;

2. The ramp starts at a fixed point, it should be noted that the turn signal should be turned on before starting after the fixed point, and in order to prevent the vehicle from retreating when starting, the clutch should be lifted slowly, until the body has been shaking for more than 3 seconds and then release the brake, and gently step on the brake when going downhill to prevent the speed from going too fast;

3. Test the two items of S road and right-angle turn, reduce the speed of the vehicle, avoid pressing the line, and keep the body to the right before turning left on the S curve;

4. Test the side parking and reversing warehousing project, the left rearview mirror should be able to see the rear wheels, because when leaving the warehouse, you should see the wheels after leaving the library and then turning;

5. Except for the two places where parking must be parked on the side and in the warehouse, the rest of the places cannot be parked.

Subject 2: Quick Pass Skills:

1. Close the door, adjust the seat and rearview mirror, fasten the seat belt before starting, and turn on the left turn signal;

2. The ramp starts at a fixed point, it should be noted that the turn signal should be turned on before starting after the fixed point, and in order to prevent the vehicle from retreating when starting to bury envy, it is necessary to slowly lift the clutch until the body has been shaking for more than 3 seconds and then release the brake, and lightly step on the brake when going downhill to prevent the vehicle from going too fast;

3. Test the two items of S road and right-angle turn, reduce the speed of the vehicle, avoid pressing the line, and keep the body to the right before turning left on the S curve;

4. Test the side of the parking and reversing storage project, the left rearview mirror should be able to see the rear wheels, because when leaving the warehouse, you should see the wheels leaving the library and then turning;

5. Except for the two places where the side parking and the storage must be parked, the rest of the places cannot be parked.

1.Debugging of seat rearview mirror: ensure that the front and back, up and down positions of the seats are consistent and the sitting posture is fixed for each car practice. The position of the rearview mirror should be judged according to the sitting position and seat position.

2. The speed of the car should be slow: the second field is small, and the speed of the car can be slowed down to reduce the risk of pressing the line. After the new regulations, only five points will be deducted for stopping in the middle of the road within five seconds, and students can slow down appropriately in events where there is no time limit.

Keep the clutch semi-linkage, adjust the depth of the clutch slightly, lift the clutch a little when you need power, and press it a little deeper when you need precise adjustment.

3 dozen direction: the direction of the second dozen should not be fast and slow, or a little bit of grinding missed the best time, the wheel trajectory will deviate, it is easy to press the line out of the line, remember the direction of the essentials "fast, accurate, back", the direction of the play should be fast, look at the point quickly hit the past, after the direction remember how much back to hit how much.

Practice the half-slope and reversing into the warehouse.

The half-slope left turn light aligns with the second line.

Turn to the right on the side.

Listen to the coach's words, remember the points and lines, practice more, don't fish for three days and dry nets for two days.

1. The first item of the subject 2 exam is reversing into storage, and the difficulty of reversing into storage: there can be no pause in the middle, which completely negates the practice of killing the direction in situ and identifying the pole in the electronic pile examination.

2. Stop and start at a fixed point.

Passing requirements: motor vehicle drivers should judge the slope, length and width of the ramp in time through vision and feeling, and take appropriate operation methods to control the smooth parking and start of the vehicle. The steering is correct, the gear shift is fast, and the direction, braking, and clutch are accurately coordinated.

3. Side parking.

First of all, it is necessary to judge the length of the parking space. Before parking on the side, first determine whether the parking space can accommodate the car you are driving. Generally speaking, adding a distance of one meter to the length of your own car can be enough to park in the side direction.

4. Curve driving.

Driving skills: The test room is an "S" shaped road, but the width of the road is only one meter. First, we must keep driving in one gear throughout the whole process, and do not rush in the direction. The second is to drive to the right and when the right wheel is bent to the right, and vice versa.

Extended information: The content and passing standards of the examination subjects are unified across the country, and the order of the examination is according to the subjects.

1. Subjects. 2. Subjects.

3. Subjects 4 will be carried out in turn, and only after passing the examination of the previous subject will they be allowed to take the examination of the latter subject.

The exam subjects are divided into:

Subject 1: Road traffic safety laws, regulations and related knowledge test subjects, the structure and basic question types of the test question bank are formulated by the Ministry of Public Security, and the traffic management department of the provincial public security organ shall establish the test question bank of the province (autonomous region and municipality directly under the Central Government) in combination with the actual local situation.

Subject 2: Field driving skills test subjects, the test items include: reversing into the garage, ramp fixed-point parking and starting, right-angle turning, curve driving, side parking.

Shanghai and other cities have nine compulsory subjects in the second subject: reversing into the garage, right-angle turning, side parking, tunnel driving, parking and card pick-up, curve driving, narrow road U-turn, emergency stop, ramp fixed-point parking and starting.

Subject 3: Road driving skills test subjects, the basic items of the test include: preparation for getting on the bus (go around the car counterclockwise, wear a seat belt when getting on the car, turn on the left turn signal, put the gear, release the handbrake, honk) start, drive in a straight line, change lanes, pass the intersection, pull over, pass the crosswalk line, pass the school area, pass the bus stop, meet the car, overtake, make a U-turn, and drive at night.

The method of subject 2 is as follows:

1. When getting into the car, adjust the seat position and left and right rearview mirrors, pay attention to check whether the seat belt is fastened, and start reversing when confirming that the gear is in reverse gear.

2. When reversing, pay attention to the lower edge of the reversing mirror, after the overlap with the starting yellow line, the direction is full to the right, control the speed of the vehicle, look at the left rearview mirror, when you see the direction of the library angle from the left rearview mirror, and adjust the body vertically and parallelly.

3. Reversing into the warehouse, pay attention to the left rearview mirror, when the lower edge of the left rearview mirror is pressed on the edge line of the collapsed paulownia in front of the library, you can stop.

4. When the left rear wheel of the vehicle has entered the parking space, we must observe the right rearview mirror to ensure that the distance between the right side of the rear of the vehicle and the vehicle next to it is safe. Observe the rearview mirrors on both sides left and right to see if the distance is reasonable, if one side is wide and the other is narrow, then you can properly correct the direction and try to correct the storage.

5. There is a simpler way, there is no need to swing the car obliquely. First of all, we parked the car in the middle of the next parking space, and the driver happened to be in the same line as the vehicle in this parking space. Note that the distance of the parking position should be adjusted according to the size of your vehicle.

6. Novices should note that reversing into the warehouse would rather play early, not late, because there are more possibilities to correct the square ridge tanxiang disc in the morning, and the possibility of correcting the steering wheel in the evening is relatively small, and the steering wheel needs to be corrected in the direction of the vehicle in the early or late time.

Operational Essentials:

1. The car starts in low gear.

2. Drive on the right side before the car enters the right-angle bend, and keep a distance of about one meter between the right wheel and the right side line of the road.

3. When the car is aligned with the driver and the inner right-angle protrusion, quickly turn the steering wheel to the left to the limit position.

4. When the left rear wheel crosses the inner right-angle protrusion, it begins to drive out of the road in the direction of the right direction.

5. Straighten the car and drive off the road.