Win7 configuration problems, win7 configuration requirements for the system!

Hello,I recently changed windows7,The official requirements for configuration are not much change,It's the minimum 1GHz frequency and 512 memory,This is the minimum configuration,But the general smooth running requires 2GHz frequency and 2G memory,I changed Vista in 2008,Generally670M memory usage,Now it's windows7 It's about the same,Boot is about 600 or so (generally no software,Only antivirus), So I don't think there's much difference, but Windows 7 has improved a lot in terms of optimizing resource usage and multi-core CPU usage, so it feels smooth. In addition, I'll tell you,1G memory with windows7 is not enough,Although there is still 300M to spare,But as soon as you open the antivirus software, you can't do it,So I added some 1G memory,Now it feels very good,The computer can operate as you like,There is no problem。 Whether you're high or low, it's hard for me to you, the general forums say it's low, but in fact, it doesn't change much.

In terms of installation, it makes no difference.

Performance. Win7 has been optimized. Naturally it will be better.

Windows 7 is the latest version at the moment, of course much better than Vista, it is better to install the flagship version, Vista is a failure of Microsoft.

1 Minimum configuration to install Windows 7 in full:

CPU 1000MHz and above As long as the CPU has good performance, there should be no problem! Recommend Intel E5300 cheap and practical!

Memory: 1GB or above The minimum memory identified by the installation is 512M, and less than 512M will prompt insufficient memory.

The hard disk has more than 16GB of free space after installation, and it is best to ensure that the partition has a size of 20GB.

Graphics card Integrated graphics card 64MB or more This is not a configuration to open aero, so save some effort! 128MB is the minimum configuration for AERO, but because it can share system memory, it is not absolute.

Other equipment *** R RW drive or other storage media such as USB flash drive for installation. If you need to install Windows 7 with a USB flash drive, you need to make a USB flash drive boot.

CPU and above Windows 7 includes both 32-bit and 64-bit versions, if you want to install the 64-bit version, you need the support of a CPU that supports 64-bit operations.

Memory: 1G DDR and above It is better to use 2GDDR2 or more, preferably 4GB (32-bit operating systems can only recognize approximate memory, but 32-bit systems can be made to recognize and utilize 4G memory through cracked patches).

The hard disk has more than 40GB of free space because things like software may still use a few GB

Graphics card Graphics card supports DirectX 9 or higher (video memory greater than 128MB) Graphics card supports DirectX 9 to enable Windows Aero special effects.

Other equipment *** R RW drive or other storage media such as USB flash drive for installation.

When you start installing win7, there will be a system compatibility test report, and you let the system automatically test it for you, it's very simple.

The next win7 activation is good, genuine activation I hope it can help you.

You can install a win7 32-bit system with the number of forest wheels,Details and ways to send you:

Processor: 1 GHz 32-bit or 64-bit processor.

Memory: 1 GB and above.

Hard disk space: 16G or more (primary partition, NTFS format).

The system chooses this first choice: a system with less than 4G memory and 32 bits; Memory greater than or equal to 4G for 64-bit systems. (The maximum memory that can be used for 32 bits is about about that, and those that are greater than this number are not used and are wasted; 64-bit can use 4G-128G memory).

This method is suitable for all versions of Vista and Windows (XP, Win7, Win8, etc.).

1. Hard disk installation method: 1. From.

Official website, many people have changed the system recently, and when they can't open it, it means that the amount is too large, change the time**)**system, all of which are free of activation, and they can be used when they are installed, or to other ****. 2. Decompress the ** system directly to the E disk. 3. Find the ghost image installer on the E drive.

exe (or hard disk with installer.) exe or setup- or install the system. exe, etc.), double-click to run.

4. Click OK in the middle of the open window, click OK if you encounter anything, and start the installation (you may restart the computer, don't worry).

The methods and steps in the official website are just followed, and they are very detailed.

Workaround:

1. Disconnect from the network. Unplug the network cable if it is wired, and disconnect the wireless network if it is wireless, so as to ensure that the computer is not in a network state. The purpose of this is to ensure that the system is not automatically connected to the Internet for upgrades when it is turned on.

2. If it is a desktop, it is recommended to open the chassis and pull out the lithium battery on the motherboard. You can also try to ignore this step.

The notebook doesn't have this, so it's not needed) Of course, this step may not be needed. The reason is because the battery is to store some information after the computer is turned off, which may be related to the problem.

3. Restart the computer, press and hold F8, select "Safe Mode" Enter (of course, this step may not be needed, you can log in directly to Windows to try to see), the interface will also appear "Configure Windows Update failed, restore the update, do not shut down", wait for a while, it will automatically shut down later, the computer will automatically restart to enter Windows login, and "Configure Windows Update Update 35%, of course, this value may be different, Wait a while and you will be able to enter the system smoothly.

4. In order to ensure that such situations do not occur again in the future.

Open the Control Panel, go to "System Security", click on "Windows Update", click on "Change Settings" on the left side, then select "Never check for updates", and finally click on the "OK" button. Reboot, no longer "Configure windows update failed, restore update, do not shut down", the problem is solved.

1.First of all, let's press win+r at the same time to open the computer's running window, and then enter msconfig in the window and click enter, so that you can open the computer's system configuration window.

2.In the system configuration window, let's switch the interface to the service column, and then check all the options in the following list, without clicking one by one, directly check the "Hide all Microsoft services" below, after checking, let's click to disable all, and then click OK to save the settings.

3 .After that, let's go back to the service window again, and then uncheck all the options we just checked, and then click on all access below.

1. You should be able to afford to run. Your machine CPU isn't very bad, with 2GB of RAM, it should be fine.

2. Install win7 plus common software, at least c disk to 20g. Considering some games or other applications, it is best to leave more than 30g.

3. That's not called a fool's installation disk, it's called a ghost installation disk. It is fast to install the system with this kind of disc, and some commonly used software has been integrated into it, which is still relatively convenient. You don't need to uninstall XP first, if it's a ghost disk, you choose to install it on the C drive, and it will automatically overwrite the things that have been on the C drive.

4. The contents of other partitions will not be lost except for C drive. However, when operating, be careful not to choose the wrong partition, and be sure to install it to the first partition (most machines have the first partition as the C drive, unless specifically specified).

You can install win7, but it doesn't run smoothly, win7 requires a minimum of 2G memory. Install Win7 system disk C disk normally and leave 30G capacity. Back up your important data on the desktop now, and reinstall the system C drive data is not available.

1. Win7 can be used.

2. Generally, 30g is enough, and even the software space is available.

3.It can be used, and it is directly covered.

4. The files required by the C drive are backed up, if you repartition, all the disk files will be lost.

This machine can be installed with Win7,C disk to 50G is the best。 If you want to repartition the files, you will lose them, so you need to format the C drive before installing.

I can run, but it won't be smooth! Thirty g on the C drive is enough. The original system does not need to be uninstalled, just install win7 on the C drive!

All the data of the C drive will be lost! You can back up your data before reinstalling! The contents of other disks will not be changed!

But it is not recommended that you install win7! You can measure it!

Install win7's 32-bit flagship version,So that the system will not get stuck,It's still smooth when running the system。

Your configuration is relatively old, win7 32-bit is just right. It's better to install the original version, not the ghost purification version. After the original system is installed, it should occupy about 22g, and then engage in various drivers and patches, so as to be safe. The ghost version is unstable in playing the game.

Of course, the simplified version is available, but there are few features for specific version types.

Well, this configuration will be a bit stuck with win7, and at least some memory will be added. Win7 system is more memory-hungry.

Why install Win7? It's better to use XP for this configuration.