Can my 4M broadband dial up Internet access be connected to a wired router A wireless router

Yes, according to the above question you just asked.

The specific steps are as follows:

1. If you have a wire, you can connect it first to ensure that you can access the Internet.

2. You need a network cable to connect the wired router and the wireless router, plug one end into the wired router with any hole, plug the wireless router WAN port at the other end, and use a laptop to capture the wireless signal and connect it after connecting it.

3. Set the wireless router Internet mode as: dynamic IP mode. That's it.

Addendum: The best way to set the gateway of the wireless router is, for example: the wired router is the wireless one, and the best one is as long as it is larger than the gateway of the wired router.

If there is anything you don't understand, ask me directly. I have 2 wired and 1 wireless and a switch connected at home, and the line in and out I know how to think about it repeatedly.

There is no need for a network cable socket on the back of the wireless router.

Both can be used when there is a line by.

It is also possible to send wireless signals.

So with wireless routing, having a line by is redundant!

I use an unlimited router in the company, and the mobile phone can also be set up by myself, I also buy an unlimited router at home, and the mobile phone can also be on it, but the network I use with the landlord is dial-up Internet access, the cat comes out, I use a small switch to connect two network cables, and I connect the infinite router terminal port is not plugged into the WAN interface, which is borrowed from the computer on the 1234 interface, and the Internet can be really long, and the mobile phone WLAN can be connected, but it can't be connected to the Internet,

Why connect two routers at the same time? Isn't it okay to connect a wireless router?

This is definitely okay, if you connect the wireless router first, you can add a switch later.

No, I can't. This shouldn't work.

If you need to check the bill and pay the phone bill, please log in to the online business hall of Anhui Telecom. Have a great day!

Hello, yes, you can connect as shown below.

Yes, 1) an ADSL broadband network cable, to realize the home office several computers to share the Internet, in addition to the correct setting of the home broadband router, but also to correctly connect the cat (modem), router and computer network card. 2) The order of connection is, the ADSL broadband network cable of the telecommunications bureau, the cat router, and the computer network card. Sort out this idea, and you will find that setting up a router to share the Internet is not technical.

3) Step 1: Connect the cat. The incoming line of the ADSL broadband of the telecommunications bureau is ** line (relatively thin), ** crystal head (RJ11) is also a little smaller.

The cat has two interfaces, one large and one small, the small one is RJ11 (** line interface), connected to ADSL broadband line; The big one is RJ45, which is connected to ordinary network cables (Category 5, super 5 twisted pair). To connect the cat, you can insert the ADSL broadband cable into the RJ11 port of the cat, and then draw a normal network cable from the RJ45 port and plug it into the WAN port of the router. 4) Step 2:

Connect your router. The network cable (RJ45, big) that comes out of the cat, if it is directly inserted into the RJ45 port of the computer network card, it can be used to access the Internet. But to share the Internet with several computers, you need to use a router.

The network cable interfaces on the router are all RJ45, the size is the same, the only difference is that 1 is marked with WAN, and 4 are marked with LAN. WAN is the entrance and LAN is the exit. Therefore, the network cable that comes out of the cat should be connected to the WAN port of the router, and then the root network cable should be connected from the LAN port, and the RJ45 interface of the computer network card should be inserted, and the connection diagram of the cat, router and network card should be connected.

Power on the modem and the router, turn on IE, enter or enter, whether the login box of the router pops up.

Yes, but the internet speed is slow.

1 The cat LAN 1 is connected to the WAN port of the router, and the 3rd port of the router LAN is connected to the computer arbitrarily. As shown below:

2 When you are ready, open the browser and enter the IP address of the router in the address bar (the equipment of different manufacturers may be slightly different, here is the wireless router I am using as an example), type and enter the username and password in the pop-up form (the equipment of different manufacturers may be slightly different, here take the admin of the wireless router I am using as an example, the username and password are admin).

3 After that, go to the router's configuration page:

4. After entering the login interface, the account and password configuration of broadband dial-up Internet access are carried out. Enter the setup wizard;

5 Then follow the prompts to configure it step by step:

5 Type the ADSL broadband Internet account and password

6 Next, enable wireless, and enter the WLAN password of the wireless router, set it casually, but it must have 8 digits. Click OK OK

If you have a cat, connect the network cable on the cat network port to the WAN port of the wireless router, and if you don't use the cat, directly use the network cable to connect the WAN port of the router.