Thinkpadx240 keeps showing after powering on, please wait

1) Immediately after booting, press F8 to the advanced option to let go, select "The latest correct configuration" Enter to repair, and press F8 to enter the safe mode to restore the system or reinstall the system (if the reinstallation is also a little wait, it is recommended to overhaul it, if you can enter the safe mode, it means that you have installed something inappropriate, and uninstall all the inappropriate things before the accident, or restore the system or reinstall it).

First soft and then hard, such problems are caused by software conflicts, inappropriate drivers, and system problems, you can restore the system in safe mode, or not reinstall the operating system, do not install software, patches, drivers, etc., and see if there is still a problem with booting? If you don't install drivers, patches, and software step by step, and find something that isn't suitable, don't install it.

If there is a hardware, take out the motherboard battery and put it on the charge, plug and unplug the memory, clean the graphics card, check whether there is a problem with the hard disk, and if it doesn't work, just overhaul it.

2) If this is always the case, first soft and then hard, reinstall the operating system, do not install software, patches, drivers, etc., and see if there is still a problem with booting? If you don't install drivers, patches, and software step by step, don't install anything that doesn't fit (if you have any questions, please ask me).

Please note: If you restore the system or reinstall it, when installing drivers, patches, software and other things, be sure not to install the things that affect your accident this time, otherwise it will be restored or reinstalled in vain.

3) Whether there is a problem with hardware, such as hard disk, memory, graphics card, motherboard, etc., if it is caused by hardware problems, it is recommended to overhaul it.

Dear Lenovo users, hello!

If you have updated the patch of the system before, wait for it, and wait for the patch to be installed and the update is completed, it will enter the system, if there is still no response after waiting for a long time, you can try to press shift+f8 when you boot the machine, whether you can choose the safe mode to enter, and then uninstall the patch of the previous update, see if the system can be started, if it still doesn't work, you need to consider backing up the data, restore the pre-installed system.

Reboot again and enter the system safe mode to see if it works.

The ThinkPad X240 cannot be turned on, you can troubleshoot it as follows:

1) First remove the battery, unplug the power plug, press and hold the power button for about 5 seconds, then plug it in to see if it can be turned on, if it still can't be turned on, continue the following steps.

2) Remove the battery, unplug the power plug, and open the back cover screws with a Phillips screwdriver. There is an opening on one side of the cover, and the cover can be removed by gently cocking it along the opening with a screwdriver.

3) After removing the cover, find the memory module, and use a screwdriver to gently remove the clips on both sides of the memory module, so that the memory module can be released. Gently remove the memory module and wait a few moments before putting it back on.

4) Cover the cover plate in reverse according to the disassembly method, install the battery, and turn on the power button to restart.

If it is a built-in loog on the computer, it is a power management driver, and the system screen is a system problem, please confirm.

IDEA Forum.

Think Forum.

Lenovo Community.

Then you should immediately find the merchant, ask them to repair or directly replace the computer, and by the way, scold them, and then ask for compensation.