What s the deal with the constant reboots of the computer?

Updated on number 2024-04-13
6 answers
  1. Anonymous users2024-02-07

    Restart repeatedly, you first see if the CPU self-test passes, but the hard disk self-test passes. Try unplugging and plugging the memory module back in, as a reboot can also be caused by a memory read error.

    Rose virus:

    Symptom: Double-clicking the drive letter cannot be opened, it can only be opened by right-clicking; After a few days, the system files are deleted and the system fails to boot.

    Transmission channels: USB flash drive, ***, mobile hard disk.

    Check Method: Place the Folder Options - View"Hide protected operating system files (recommended)."and select "Show all files and folders" under this item. Then open either drive letter, if you find a "AND" file, it is poisoned.

    Solution: Manually: End the process, and then delete the following files: and files under each drive letter (including your own USB flash drive, etc.), C:

    windows,c:windowssystem32 records the time of deleting files),d:files; Finally, delete the dll key under the hkey local machine software Microsoft Windows CurrentVersion Run in the registry, and then restart it.

    Then reboot it.

  2. Anonymous users2024-02-06

    You check if your CPU fan is rotating, sometimes the fan is a little bit of a problem, causing the temperature to be too high, it will automatically restart, the next CPU temperature test software, if there are more than 70 degrees, it will not work, and then reinstall the system.

  3. Anonymous users2024-02-05

    If you have replaced the motherboard, there are only two possible causes of the problem:

    The temperature is too high. It is mostly caused by the CPU fan not running fast enough or it is broken. Or maybe it didn't turn at all.

    2.The operating system is running incorrectly. (This is unlikely, because you don't see the error).

  4. Anonymous users2024-02-04

    Did you experiment with hardware elimination?

    Don't blindly change the motherboard The motherboard is changing the system == a series of work You are affected, it is recommended to use the hardware exclusion method.

    Consider memory OK first

  5. Anonymous users2024-02-03

    The computer always restarts automatically.

  6. Anonymous users2024-02-02

    The computer has been restarted repeatedly, and the reasons for not being able to turn on may be: incompatible drivers, high CPU or other hardware temperatures, bad sectors on the hard disk, power failures and voltage instability, described in detail as follows:

    1. Incompatible drivers can also lead to restart. You need to restore or reinstall your system.

    2. Caused by high CPU or other hardware temperatures. In this case, you need to power off the computer and wait for the temperature of the console to drop before restarting.

    3. The hard disk has bad sectors: it may be because the host has been impacted, you can use the system's own functions or software to repair the disk, or format the hard disk to repartition and reinstall the system.

    4. Power failure and voltage instability can also cause automatic restart. You need to check if there is a problem with the socket connected to the computer, and if there is no problem with the socket, you can take it to the computer store for inspection.

    Notes:

    1. Don't put too much sundries next to the computer, as it will not be able to dissipate heat normally for a long time, which will affect the efficiency of the computer.

    2. During the use of the computer, the number of cold starts of the system should be minimized, and the time interval between continuous opening and shutdown should be appropriately extended to avoid the backlash voltage and affect the service life.

Related questions
2 answers2024-04-13

1. Viruses in the computer.

Generally speaking, many computer viruses will find this situation, when computer applications and core components are damaged by computer viruses, the computer may automatically shut down, and when there is malicious programs installed in the computer virus, it may be restarted to complete the installation of malware. The principle is similar to when we install some software. It is also common to find that some important security software needs to be restarted after installation. >>>More

4 answers2024-04-13

Screen is a common display failure, most of the computer screen failures are caused by the graphics card itself, the following solutions may be helpful to you. >>>More

8 answers2024-04-13

Poisoned, check for the virus.

Or which hardware is not plugged in steadily, check whether the memory, graphics card, etc. are plugged in. >>>More

14 answers2024-04-13

If there is a situation where Apple automatically restarts, it is recommended to deal with it in the following ways: 1. In this case, most of the time there is a problem with the system of the mobile phone, and it is impossible to boot it, so the only way is to enter DFU mode to flash the phone, first of all, install an iTunes on the computer; 2. After installing iTunes on the computer, then you have to re** an Apple system, that is, iOS firmware, this firmware version is not much different from the current mobile phone version, and the firmware can be found as long as it is a glance; 3. After preparing the iTunes and flashing firmware, you can start to officially flash the computer, first open the iTunes installed on the computer, and then connect the iPhone with the computer with a data cable; 4. After connecting the mobile phone with the computer, and then press the power button and the volume reduction button at the same time, at this time Apple's logo will appear, don't care, continue to press the double button and don't let go, the Apple logo will disappear again, at this time, release the power button, continue to keep the volume reduction key and don't let go, and keep pressing until the computer sends out a prompt sound "Ding Dong" connected to the mobile phone, which means that it has entered the DFU; 5. When the mobile phone enters the DFU, iTunes on the computer will pop up a prompt to connect to an iPhone, click "Confirm"; 6. When you click "OK", iTunes will appear as shown in the following figure, at this time, the more critical step is coming, the shift key on the keyboard, and then click the "Restore iPhone" button; 7. After clicking the "Restore iPhone" button, the system will open the folder, and then select the firmware that has been done before, at this time, the system will remind you, click "OK"; 8. After completing the above steps, start to reinstall the system, and then on the way to restore the iPhone, do not turn off the computer and do not unplug the data cable, let alone turn off iTunes; 9. When the mobile phone system is installed, and the screen of the mobile phone appears in the following situation, it means that the mobile phone system has been reinstalled successfully, and then open it for use.

12 answers2024-04-13

Agree with the view of the first floor.

You can try it with a 512. >>>More