Boot reboot problem, what s going on with boot restart, how to fix it.

Agree with the view of the first floor.

You can try it with a 512.

Or it may be that there are too many things loaded on boot.,Maybe it's more than 512.,It's going to be like that.,Then ,,, will have to ,,, more memory capacity.,Personal understanding,,Hehe,

This is not necessarily, it is likely that the operating system is infected with a virus, and you need to reinstall all the hard disks;

If it's a memory problem, generally speaking, you can't turn on the machine at all, and you can't enter the welcome interface and it will crash, and then it's possible that there is a problem with the memory slot on the motherboard, and you have to change the motherboard.

It is estimated that the memory circuit on the motherboard is burned, and you may have the behavior of hot-swapping the memory, which is quite dangerous.

To see if there is a problem with the gold finger in your memory, erase it with an eraser.

Is the memory broken?

Blue screen? Is it pure blue or is there an English ??

Just reinstalled your system?

Suggestion: Dusting, the cleaner the better, take the gold finger of the eraser memory module (the part that is plugged into the motherboard).

This is an example of an incompatible memory module.

Hello friends:

The main reasons and solutions for the computer to keep restarting are as follows:

The first reason is: the general computer has been restarting, 60% of the host power supply problems, when the power supply filter capacitor bulging and leaking, resulting in insufficient power supply, it will form a computer automatic restart.

Solution: Replace the power supply of the host.

The second reason is: there is a problem with the CPU fan on the computer, or the clip of the heatsink is loose. When the CPU fan is stuck or broken, causing the CPU to not cool down, when the temperature reaches the set temperature of the motherboard, the motherboard starts the self-protection function, and then restarts, or when the CPU heatsink card is loosened and turned on, the CPU detects that there is no heatsink to cool down, and immediately stops working and cuts off the power supply, so it will automatically shut down and restart after a few seconds, and restart repeatedly.

Solution: Jianyi replaces the CPU fan, or because the ash blocks the fan, just get the fan through. If the heatsink clip is loose, then just reinstall the clip and add some silicone grease to the CPU.

This is all to cool down the CPU, only the CPU can ensure the normal use temperature will not automatically restart repeatedly.

The third reason is: the graphics card's video memory integrated block is soldered, resulting in poor contact with the motherboard after power-on, it will automatically restart.

Solution: It can be solved by soldering the video memory, or changing the graphics card.

The fourth reason is: the voltage is unstable, that is, below 170V, higher than 240V, if the starting voltage is not reached and the specified voltage is exceeded, the computer will be restarted.

Solution: Jianyi buys a UPS, also called an uninterruptible power supply, so that it can not only stabilize the voltage, but also have 30 minutes to save the data time, the fifth reason is: the motherboard's boot circuit has a problem, such as CPU power supply, reset, clock, MOS tube problems, will lead to repeated restarts, and can not be turned on, processing method:

Jianyi can repair the motherboard.

The sixth reason is: the computer poisoning destroys the boot area and the system, and the boot area cannot be found when the boot is turned on, so it will naturally restart repeatedly.

The solution is to repair the boot area and reinstall the system, (or a one-click restore). There is another point to do, which is to restore the BIOS to its factory value, or you can discharge the BIOS (that is, open the case, remove the motherboard battery, wait for 10 seconds and then press back to the motherboard, I hope it will help you, I wish you happiness

Enter the boss.,There may be a problem with the setting.。

In summary, there are two reasons for this failure:

1. Hardware.

Poor CPU cooling or overclocking of the graphics card.

CPU, clean the fan and reapply the heat dissipation silicone.

As for graphics cards, it generally appears when low-end integrated graphics cards are running large games, and this is not possible, so you can only change to a discrete graphics card with superior performance.

2. Software.

When critical system files are severely corrupted, especially now that cloning installations are raging and the system is unstable.

If this is the case, you need to repair the installed operating system with the original Microsoft installation disk, or reinstall the operating system. It is still recommended to use the Microsoft original instead of cloning.

If you have one-click repair, use one-click repair, and if you don't have one, just buy a disk and reinstall it.

It's usually the CPU that is overheating. The fan is broken, or the probe is broken, or something else: open the case, plug your graphics card, the memory back in, and wipe the dust off.

Whether it's a desktop or a laptop.

Clean up the dust in your host first, don't tell me that there is no dust in your host, come down and see if you can enter the system. If you still can't get in, Nan Wu Gong has a bad block in your hard drive. If you know how to fix it yourself, fix it yourself.