The genuine NOKIA5320 phone fell into the water, the motherboard burned, and it couldn t be turned o

Friends, then there is no way!! Send after-sales service!!

There should be after-sales service in your city!!

I hope to help you find the right way to repair!!

Needless to say, you know that you need to pay for such after-sales service!! I estimate that the ** of the motherboard should be a lot of money!! Consider getting a new phone!!

Remember::: Don't take it to an unknown repair service point for repairs, the consequences don't need me to say, I think you should know it too!!

Let's declare it scrapped.

If not, you can go and see if there is a motherboard for sale, the most important thing for a mobile phone is the motherboard.

It's really not good, just dismantle and sell parts.,Screen shell button parts or something.,Can make up for some losses.,Alas,What a good machine.。

Silence, who told you to fall into the water, and went to turn on the motherboard.

I can only admit that I fell into the water, and the customer service doesn't care.

If the motherboard is burned, there is no need to spend money to repair it, which is equivalent to buying a new one.

The motherboard burned and there was no way, and it was announced that it would be scrapped

Licensed? If it's still under warranty, it's easy to do. You dry your phone. It should be very dry, so dry that you can't see that it has fallen into the water.

Then take it to the after-sales service and say that your phone can't be turned on for no reason. He asks you how you got it, and you don't know anything.

See how he solves it. Some of the better people even pretended not to know about it and sent it to you for repair. Gratis.

Anyway, they made so much money that they were not wronged to spit it out.

Is it the phone poisoned, restore the original factory password to the initial 12345, or the grid machine *,

Try to change the battery first, if it doesn't work, will the grid machine work? When the device is turned on, *, the password is initial 12345If it doesn't turn on.

After putting the battery away, the colleague pressed the dial button, the hang-up button, the camera button, and the switch device, and held it at the same time, and waited until it was turned on. The above methods are not good, you can only flash the machine, or send it to customer service for maintenance, (the mobile phone data of the grid machine will be lost).Hope to adopt. You're welcome.

Steps: 1. Disassemble the whole machine, and prepare the corresponding screwdriver before using.

2. When removing the screen, pay attention to gently separating the chiplet connected to the motherboard from the motherboard.

3. Before removing the metal shielding isolation layer, tear off the network access card and the card slot sticker under the network access card.

4. Finally, take a water blower to dry blow, but don't blow on the screen for a long time, such a high temperature will destroy the screen, even if the screen has a watermark, you can use the phone normally, the water in the screen will generally dry in two days, and you will see that the watermark inside is getting smaller and smaller.

5. Blow the front and back of the motherboard to ensure that there is no moisture residue, and try to blow out the water at the earpiece and buttons.

6. Finally, put the disassembled mobile phone in a dry and noisy place, preferably about two days, and then install it.

Don't get it yourself, go to the shop and fix it. Because it's dirty, it has to be washed with a machine.

I "drank" coffee before the dance.,And I changed the screen.。。 Bless you if the screen isn't broken.。。 It's expensive to change the screen

At that time, it could not be turned on, and the battery should be directly deducted. Now you send it to the after-sales repair first, and if there is no after-sales, go to a larger mobile phone repair point. Generally, the motherboard will be changed, and there are exceptions ......

Go to customer service to disassemble it and blow it with a hair dryer, but you must make sure that the motherboard is not burned, because you turned on the computer at the time, so I am afraid that the motherboard will be burned.

The original on the motherboard of the phone was burned out by a short circuit. The specific reason is not clear, I don't see the machine. Generally, the maintenance master will directly ask you to replace the motherboard, because the modules on the motherboard of Nuoji's mobile phone are sealed, which is troublesome to remove the glue and has a great risk of damage.

In the future, when you encounter this situation, take out the battery in time, and then send the mobile phone to repair there to disassemble and clean the motherboard and LCD, and do not blindly turn on the phone. Of course, if you are not in a hurry to use it and only water is in it instead of some solids, it is no problem to take out the battery and put it for half a month before using it.

Nowadays, many people keep their mobile phones with them, and it is inevitable that they will fall into the water. What should I do if I drop my phone in the water? Drying with a hair dryer? Throwing the water out? Wipe with alcohol? Put it in rice? Actually, these are not good solutions!

Drying with a hair dryer is easy to burn out the components of the mobile phone.

If you blow your phone with a room temperature wind, it can't blow inside the phone, and it can't remove water;

Shake the water hard, it is easy to throw the water deeper and deeper;

Alcohol wipe, alcohol will erode the oil-resistant coating attached to the surface of the phone, which will do more harm than good;

And when it is put in rice, it takes a long time, and there is no guarantee that all the water in it will evaporate, and the method is very simple:

1. Remove the battery (the all-in-one machine is not rutted, and remove the battery from other non-replaceable batteries), wipe the phone clean, and wrap the phone with newspaper to prevent high temperature water vapor from entering the phone;

2. Preheat the dry rice cooker liner;

3. Wait for it to be adjusted to the heat preservation setting and then put it in the mobile phone;

4. Dry it for a while with the heat preservation file!

This method can perfectly remove the moisture inside the phone without damaging the phone. ）

Your phone is back to light, and it still has to be sent for repair!