What s going on with the left button indicator light on Xiaomi mobile phones

If all the key lights below are on, you can enter the settings, and the keys and keyboard lights can be set by themselves.

If only one of the buttons is always on, it is definitely not normal.

It is recommended that users back up their mobile phone data, restore the mobile phone to factory or flash it directly, if it is a software problem, it can be eliminated after the operation.

If the problem cannot be solved after restoring the phone to the factory or directly flashing the phone, it is a hardware failure, and it is recommended that the user send the mobile phone to the brand's customer service for testing and repair.

Hello, 1.It is recommended that you uninstall your system security software, go to recovery (shut down, press and hold the volume up + power button to enter recovery) to clear the cache and try to recover.

2.Please back up your data, enter recovery to clear all data (turn off, press and hold the volume up + power button to enter recovery), upgrade your phone to the latest development version of the system, do not install third-party system security software for the time being, and see if it can be restored to normal.

3.If it still does not work, please go to a repair center near you for testing.

Address and ** inquiry.

At the same time, 9 Xiaomi Home in Beijing, Shanghai, Nanjing, Wuhan, Chengdu, Hangzhou, Xi'an, Shenzhen and Guangzhou have maintenance capabilities. Mi Home is open Tuesday to Sunday, from 10 a.m. to 7 p.m.

We hope you find the above reply helpful.

Try to change the firmware, it may be an estimated bug. If it's still the same after changing, then consider going to the after-sales service.

Haven't heard of it. Hehe. After-sales bar.

Xiaomi mobile phone is connected to the total size of the screen is bright,There are about three situations,The situation and solutions are as follows:

1. Please confirm whether the mobile phone is using the original film, if a non-original film is used, because the non-original film has not been tested for compatibility, it may affect the function of the mobile phone sensor. It is recommended to remove the film and see if it can be used again.

2. If there is third-party calling software installed on the mobile phone, it is recommended to uninstall the software first, and then observe whether it can be restored.

3. Please check whether the screen is stained, if there are stains, the pants may affect the function of the sensor, it is recommended to use a soft cloth to wipe the screen clean and use it to view.

Find the phone settings and tell the potato to open the settings interface, as shown in the figure below.

2.Then click Display, and enter the Tremor Friend liquid into the settings display interface, as shown below.

3.Finally, click double tap to wake up, and you can wake up with two clicks on the touch screen of the mobile phone, as shown in the figure below.

The indicator in the upper right corner of the Xiaomi mobile phone is the prompt breathing light of the Xiaomi mobile phone, and Huizao can represent different functions according to different colors: there are missed calls, text messages and notifications, low battery prompts, etc., and the breathing light can be customized.

The breathing light is a gradual change from bright to dark under the control of a microcomputer, and it feels as if a person is breathing. It is widely used in mobile phones, and has become one of the selling points of major brands' top mobile phones, playing a role in notification reminders.

The lock screen time of the mobile phone can be set, and when we want to check the information on the mobile phone, we may need to extend the automatic lock screen time or set the screen to never go off. So how to set the screen of Xiaomi mobile phone to always be on?

Xiaomi 11 Pro can't set the screen to be always-on. Because it uses an OLED screen, in order to prevent screen burn-in, it does not support never lock the screen, and can only set the automatic screen lock for up to 10 minutes. The specific steps are as follows:

1. Open the phone settings and tap [Screen Off & Lock Screen].

2. Click [Auto Lock Screen] and check the automatic lock screen time.

This article takes Xiaomi Mi 11Pro as an example for MIUI 13 system.

How to set the screen to be solid on Xiaomi phones? When we are consulting information, it will be very troublesome to always turn off the screen, if only the screen could be kept on, so how to set the screen to always on Xiaomi mobile phones? Let's take a look

1. Turn on the Xiaomi phone"Settings2. After entering the settings, scroll down to find ".Lock screen, password, and fingerprintClick in.

3. Find".Auto-lock screenoption, tap to turn on and set the auto lock screen time to ".NeverAfter the setup is complete, the screen will always be on and will never sleep.

1. Turn on your phone and set it up on the main interface. Click to enter the settings, where you can see a variety of settings such as notifications and status bar, wallpapers, personalized themes, fonts, font sizes, sounds and vibrations, Xiaomi phones.

can be done here.

2. Swipe down on the settings interface to see "Other advanced settings", the function we are looking for is here. Click to enter "Additional advanced settings", you can see security and privacy, date and time, language and input methods, etc., and click "Power and Performance" in it

3. You can see a power-saving optimization in the power and performance interface, which is a key step for us to set up.

4. Click to enter the power saving optimization, and then click the power saving mode to add a custom mode here.

5. Click Sleep in the custom mode, and you can set the sleep time of the phone. Select "Never", and after successful settings, your phone will not actively sleep when you don't tap the power button, and the screen will be on constantly.

In the settings, the specific method steps are as follows.

Open "Settings" and click on "Other Advanced Settings" after entering.

Click on "Buttons" and enter the drop-down menu to the "Keyboard Light" option.

After selecting and opening it, click "Keyboard Light Duration" below again to adjust the time.

Return to the standby screen, pull down the menu in the notification bar, and select "Screen Buttons" to turn off all the button functions below.

Settings All Settings Keys Keyboard Light Tap it to turn off, use normally, save electricity.

The following is the specific way to turn on the key light of the touchscreen Xiaomi mobile phone:

1. Turn on your phone and go to Settings.

2. Click on Other Advanced Settings, and then enter the button.

3. Click the keyboard light and click to turn on.

If the light was on before, just reply to the phone factory settings.

When the Xiaomi phone is charging, the breathing light below is always on, which is normal. Here's how to set the color of the breathing light:

1. Turn on your phone, and then tap to the settings in your phone.