How to connect one of the two computers in the home to the Internet and connect the two with network

The two computers can be connected directly with a crossover cable. Set up the network connection first, and the working group will do the same. Set the IP address of the NIC connected to the passenger plane in the host

Mask:,Gateway:,DNS:

The network card IP:,Mask:,Gateway:

dns:, automatic fetching is also possible. If you want to share the Internet, enable the Internet sharing of the network card of the host connection modem (NIC connection - Properties - Advanced).

The premise is that the network does not restrict the sharing of the Internet. Note: The network cable connecting the host and passenger aircraft is a crossover cable.

For file sharing, you need to add the NWLINK IPX protocol and file and printer sharing to the two NICs connected to the computer. When you're done, you can set up sharing in the file's right-click menu.

Install a network card on one of the machines, and then make a network cable to connect it.

Go to some companies that specialize in computer equipment, ask them to connect you with a network cable, the length should not exceed 2 meters, pay attention when connecting, do not connect in the normal way, but connect a section backwards (generally tell them your purpose, they will know how to do it). Then connect the network cables through the network cards of the two computers.

How convenient it is to buy a land rover, it is only more than 100 yuan, and it does not affect each other.

It is possible to connect two ordinary computers with a network cable, but the practice of network cable is exquisite, and it must be made into a cross line, that is, one end can be done according to 568A and one end according to the standard of 568B. Then connect the network cards of the two computers separately.

Cross line: also known as reverse line, the line sequence is arranged according to the standard of 568A at one end and 568B at one end, and clamped with RJ45 crystal head.

The specific line sequence production method is as follows: 1, white green, 2, green, 3, white orange, 4, blue, 5, white blue, 6, orange, 7, white brown, 8, brown, that is, 568A standard.

At the other end, on this basis, the eight lines of the 1 and 3 lines, 2 and 6 lines are reversed, and then the line sequence of the network cable becomes 568b (that is, the order of white orange, orange, white green, blue, white blue, green, white brown, brown) to do the line standard unchanged, so that the crossing line is done 6 cross connection method. Although twisted pair has 4 pairs of 8 cores, in fact, only 4 of them are used in the network, namely the 1st, 2nd, 3rd and 6th pins of the crystal head, which play the role of receiving and sending signals respectively.

Crossover wires are generally used to connect the same devices, such as routers and routers, computers and computers; Nowadays, many of them also support straight lines, but it is recommended to use cross lines.

According to the regulations, the cross line is used, and now the network card can be automatically recognized, and if the through line can be used, the through line is good.

There are two types of IP settings for one computer.

The IP of the other unit is set to.

The subnet mask is set to just that.

dawei dpca is written more or less correctly, probably a little negligent, changed the ip address correctly Connect the two computers with a crossover cable.

The IP of a computer is set to.

The IP of the other unit is set to.

The subnet mask is set to just that.

dawei dpca is generally written correctly, maybe a little negligent, changed the ip address correctly.

Connect the two computers with a crossover cable.

The IP of a computer is set to.

The IP of the other unit is set to.

The subnet mask is set to just that.

The network cable head of the two computers directly connected to the Internet is not the same as the general Internet, you go to the place where you buy the computer and ask them to make you a network cable for two computers to dock, and then right-click "Internet Neighbor" on the two computers, then click "Set up a home or small office network" and then select "This computer is connected to the Internet through the resident's gateway or other computers on the network", and then the next step, set the computer name, and then the next step is to select a workgroup, the two computers must be the same workgroup, and finally" Enable document and print sharing" restart and you're OK.

The next step is to set the IP, the IP of the two computers should be set in the same IP segment, the mask and the gateway should be the same, and the two computers can access each other after setting.

To tell you very clearly, this approach works. One of my classmates made it, but I didn't know it. But for sure!! Guarantee.