How to clean the strap and how to clean the strap

The simplest and clearest way. Use a toothbrush dipped in a little soapy water to quickly scrub the dirty area, and then wipe it with a slightly damp cloth. To avoid soapy water from penetrating the cortex, the whole process is best completed within 20 seconds.

In addition, consumers can also apply some leather oil to the strap, which has a protective effect on the strap and can make the maintenance work more complete. How to maintain it? There are many common belt materials, generally divided into crocodile skin, lizard skin, ostrich skin, shark skin and calf skin, etc., no matter which material will be worn for a long time will produce odor, so it is the only way to maintain the belt after cleaning and keeping it dry.

If the strap gets wet, wipe it off immediately with a cloth, and wipe off any dust (if it is wet, wipe it off after cleaning). In addition, if it is exposed to the sun for a long time, it will also cause the strap to deteriorate, which is also a point to be aware of. The leather needs to breathe, and the ventilated environment can prolong the life of the strap, and wearing different straps can not only reduce the risk of man-made damage, but also allow the strap to get enough rest.

In addition, the wearing of the belt watch itself is a process of constant wear and tear, and if you don't it every day, it will naturally accompany you for a longer time.

You can use a cloth dipped in alcohol with water and gently sassafras until it is clean. 95% alcohol, 1:1 ratio of water, can also be used toothpaste, or wind oil essence to wipe off stains.

Use hand cream, especially expired hand cream, and rub it with a soft cloth, preferably an old mask cloth. This method is not only suitable for leather straps, but also for all leather, imitation leather materials, as well as light-colored leather shoes and boots. This method not only decontaminates but also protects the leather.

Using safflower oil can effectively clean the watch belt, and using glasses cloth to absorb some safflower oil will wipe the watch belt very clean, but there will be a little smell. To clean with hydrogen peroxide, take one-tenth of hydrogen peroxide mixed with warm water and add laundry detergent to gently scrub with a brush. It can not only decontaminate, but also disinfect and sterilize.

1. Use professional strap oil. We know that there will be a special color of leather oil for leather shoes, so when our strap is genuine leather, we can also use this method to oil the strap.

2. Wipe the strap body with a paper towel. If our strap is not particularly dirty, we can use a paper towel to scrub it, but be careful not to use wet wipes here.

3. Add a little toothpaste with a soft cloth. The toothpaste we usually use also has a cleaning effect. In particular, we can use a soft cloth so that rubbing it on the strap will also have an effect.

4. Rinse directly with water. We know that if you are using a stainless steel watch band, then it is waterproof and not afraid of water, so you can rinse it directly at this time.

5. Clean with ultrasonic. If we have the conditions, we can buy an ultrasonic cleaning machine. He will make some tiny crevices and dirty things clean.

1. Steel belt: Although the steel belt is more durable and looks quite bright and clean, the importance of cleaning cannot be ignored, as dirt will easily hide in the cracks and may stain the sleeves when oozing. The metal strap can be cleaned with clean water, and when the dirt is severe, it should be gently brushed with a soft toothbrush to avoid wetting the watch body.

After washing, do not leave water in the cracks of the strap, and carefully dry it with a dry cloth. Remember not to use tenalot, nail polish remover or chemicals, as they may corrode the steel belt, rinsing with water is sufficient.

2. Cloth tape: The cloth belt is easy to clean, and the most important thing is not to get wet to the watch body. Therefore, before washing, you can remove the strap and gently scrub it with warm soapy water.

The fabric absorbs water, and after washing, you can use a hair dryer to dry it or lay it flat on a towel to dry. If the strap cannot be removed, it can also be gently wiped clean with a toothbrush, and then blown or left dry until it is completely dry.

3. Belt: For leather straps, it is necessary to take care of them more carefully to avoid frequent wear and tear of the strap caused by daily use. The belt cannot be cleaned by washing, and the easiest way to clean it is to dip a soft cloth in leather maintenance oil and wipe it carefully.

As for the metal buckle on the belt, it can be washed with water, similar to the cleaning method of the steel belt, you can use a toothbrush dipped in a little soapy water to gently scrub, but be careful not to touch the leather part, and should be wiped clean with a dry cloth as soon as possible.

The strap can be cleaned with soapy water, alcohol, vinegar, and toilet water.

1. Soapy water

When the watch belt produces a peculiar smell, use a toothbrush dipped in a little soapy water to quickly scrub the dirty area, and then wipe it with a slightly damp cloth.

2. Alcohol

Spray 99% medicinal alcohol on the watch belt, and then wipe it with beeswax, the sour smell can be removed immediately, and it can be permanently eliminated after three times, and it has the effects of disinfection, moisture-proof, mildew and mildew, etc., and will not hurt the leather.

3. Vinegar

You can add a little vinegar to warm water, then soak the watch strap in it for 2 hours, and then wash it off with soap to reduce the odor.

4. Toilet water

You can also pour toilet water on the towel, and then wipe the watch belt with a towel, the leather smell is gone, and the watch belt is cleaned.

Precautions for strap cleaning

When cleaning, clean the surface first, and then the buckle and pattern can be cleaned with a pin or ear picker, and some dirt and other dirt in the crevices can be slowly picked out and carefully cleaned.

After cleaning the details, soaking the strap in warm water with an appropriate amount of dish soap can help dissolve the grease on the band. After soaking, use a toothbrush dipped in an appropriate amount of toothpaste to brush the strap to help remove the stubborn oil attached to the surface, and then rinse it off with water.

Here's how to clean the strap if it's dirty

1. Wipe with a soft cloth: After the strap is removed, wipe a large area with a soft cloth first, that is, wipe some obvious dust and dirt on the connecting part of the strap first.

2. Wash with a toothbrush dipped in soapy water: turn on some soapy water with a large concentration, take an old toothbrush that you don't use, dip it in soapy water, moisten it as a whole first, then brush it quickly, and finally rinse it with water, dip it in water with a soft cloth, and then let it dry naturally.

3. You can use a toothbrush to apply cleaning powder, shower gel, detergent, etc. to brush the stains on the strap, or you can use a rag to wipe it gently. Gently brush to a certain extent and rinse off with water. Then dry it with a rag, use a hair dryer, or leave it in a ventilated place to dry.

How to remove the watch strap:

1. Before preparing to remove the strap, please look at the arrow on the back of the strap clearly, and note that the band with the arrow is removable.

2. Unscrew the handle of the tape remover, put the strap into the watch slot, and keep the steel of the tape remover aimed at the pinhole. The steel needle of the tape remover is tightened inward in the direction indicated, and the steel needle (raw ear) connecting the strap will be ejected, and then the raw ear can be pulled out with pliers.

3. During use, carefully use a steel needle to scratch the strap, and after disassembling the strap to a size suitable for the wrist, it is necessary to connect the strap that is broken into two sections. After inserting the raw ear and fixing it, the remaining part of the large section can be gently knocked with a hard substance, preferably a colloidal hard object, and then the raw ear can be slightly pushed into the depression with a tape remover.

4. Note that when linking the strap, the inserted ear should be in the opposite direction of the arrow, and the end of the steel needle circle is advanced, that is, the smaller end.