-
Opening method: 1. Use chopsticks to open the lid and lock the lid Pressing down hard to press it into place, and then rotate it to the opening position to open the lid to open it.
2. Rinse with cold water until it can be opened.
3. Find the (on-off) position on the lid of the pot with one hand, grab the other side with one hand, and slowly exert force along the direction of opening.
Reasons why the lid of the rice cooker won't open:
1. If you don't have a complete pressure relief, just wait patiently for a complete pressure relief.
2. The electric pressure cooker has been used for a long time, although the pressure has dropped to normal atmospheric pressure, but the safety valve can not naturally fall to the position where the lid can be opened normally due to the increase in resistance between the safety valve and the lid (oil, food residues and oxides).
-
The characteristic of pressure cookers is that the air pressure inside is the same as the atmospheric pressure before the lid can be opened, so after each cooking, you must wait for the pressure relief inside to be completed, or manually relieve the pressure. Another situation is that the float valve of the pressure cooker (the same thing as the lock pin that controls the rotation of the pressure cooker lid) is dirty, it is not easy to float up and down, and the lid is not easy to open, so just take it off and clean it.
-
Turn off the power first. Pull the vent hole on the lid of the pot a little outward (note: don't lean your head too close!) )
-
If it is hot, I am afraid that the water vapor will accumulate for a long time, and it will produce **-
Rinse it with cold water first,,, until it's cold, pry it open, and if you can't pry it open, sell it and buy a new one! Be careful.
-
Is it a voltage national pot? If you want to drain all the gas in the pot first, if you can't open it again, use a small flathead screwdriver to top the exhaust hole.
-
Hello. 1。If you want to continue cooking, as my friend upstairs said, unplug the power elimination program and start over.
2。Because the temperature of the furnace body is still there, the pressure and temperature are corresponding, and it cannot be lowered at once; In this case, apply a thick cloth of wet and cold water to the lid, and after a while, the pressure will be eliminated, and the lid will be unscrewed naturally. FYI.
-
How to open no? There's too much gas in it.。。 You rinse it down with cool water. Don't be too cold, Wende can do it, the main thing is to keep his air pressure stable.
-
For rice cookers with high-pressure functions, attention should be paid to the position of the pressure reducing valve before turning on the power to make porridge, otherwise the air outlet will be too long when the rice is boiling, causing the rice slurry to block the exhaust hole or pressure reducing valve, so that it is not safe and will affect the opening time. Users can find the manual of the rice cooker, refer to the fault or problem column to compare, if you can't find a solution, it is best to contact the after-sales or service ** consultation.
In addition, before boiling the pot, disconnect the power supply, and wet two towels with cold water and apply them to both sides of the lid to cool down, paying special attention not to cover the exhaust holes. If there is a blockage, clean the rice pulp particles on the lid of the pot after boiling, especially the vent hole and pot ring must be cleaned.
-
The lid of the pot is broken, so ask a man to remove the lid and fix it, and then put it back on.
-
Turn off the power first and then deflate it.
-
The lid won't open or the switch won't open.
-
Blanch it with hot water, and the hot water is about 60 degrees
-
One of the reasons why the electric pressure cooker cannot be opened after cooking is that there is still air pressure in the pot, and it can be opened after the pressure is relieved; Another reason is that the check valve is not returned, find a hard object to press the check valve, so that the check valve returns, and it can be opened.
1. Rotate the lid clockwise, if the lid is moving, it means that there is no air pressure in the pot, and the main reason why you can't open the pot is that the check valve is not in place, preventing you from opening the lid.
The solution is that you can find a hard object (such as chopsticks or something) and press the check valve to make the check valve return to position to open the lid.
2. If you rotate the lid clockwise and do not move, it may be that there is still air pressure in the pot, and you must cool it and relieve the pressure.
The methods of pressure relief are generally natural cooling, wind blowing cooling and lifting pressure felling.
If you are not in a hurry to boil the pot, it is best to use natural cooling to relieve pressure, and there is generally no need to lift the pressure to relieve pressure until it is absolutely necessary. If you do not use this method, you should pay attention to the gas emitted from the vent at the top of the pressure cut, and do not let the heat hurt you.
When the lid of the electric pressure cooker cannot be opened, there are generally the following solutions.
1. If you don't have a complete pressure relief, just wait patiently for a complete pressure relief.
2. The electric pressure cooker has been used for a long time, although the pressure has dropped to normal atmospheric pressure, but the safety valve can not naturally fall to the position where the lid can be opened normally due to the increase in resistance between the safety valve and the lid (oil, food residues and oxides).
-
Your electric pressure cooker, cooking too much in the process of cooking does not affect him to turn on. I think if you have trouble opening it now, it is likely that the pressure of the electric pressure cooker has not been released, you can open its air release valve and turn on the pot after completely removing the gas inside.
-
Hello. Because of the improper operation of the electric pressure cooker, the proportion of cooking rice is more, and the electric pressure cooker cannot be opened when the time comes, you can first cut off the power exhaust valve and manually exhaust the gas, and after the gas is discharged, place it for a longer time and wait for the temperature in the electric pressure cooker to decrease before trying to open it.
-
If the rice in the electric pressure cooker is too much to boil and can't be opened, then you can open it after it is cold, after all, the principle of thermal expansion and cold contraction.
-
Check Valve ProblemThe check valve problem of the Supor electric pressure cooker will cause the lid to not be opened. You can rotate the lid of the Supor electric pressure cooker clockwise, if the lid is moving, it means that there is no air pressure in the pot, that is, the check valve has no aftertaste, the solution is to find a hard object (such as chopsticks and the like), press the check valve, and promote the check valve to return, and you can open the lid.
2.There is more gas in the pot, and the electric pressure cooker uses the principle of gas to make the food more comprehensively heated and has high nutritional value. If there is a lot of gas in the Supor electric pressure cooker, it is easy to fail to open the lid.
At this time, natural cooling and wind cooling can be solved, and it is generally not necessary to lift the pressure to vent the pressure until it is absolutely necessary.
3.The pressure lock is lockedThe current Supor electric pressure cooker has the safety protection of opening and closing the lid, which can ensure that the lid and the pot body cannot be pressurized when the lid and the pot body are not in place.
I still can't open the question.
-
Hello dear, I'm glad to answer for you what to do if the lid of the rice cooker can't be opened? If the lid of the rice cooker does not open, you can try the following methods:1
Wait for it to cool and try again: If the rice cooker has just finished cooking and the lid won't open, it may be because of too much pressure inside, you can wait for the rice cooker to cool down and try again. 2.
Press the decompression button: Some rice cookers have a decompression button on the lid, and you can press the button to release the internal pressure before trying to open the lid. 3.
Tap firmly: You can gently tap the lid of the rice cooker with your hands, sometimes this will open the lid. Be careful not to use too much force to avoid damaging the rice cooker.
4.Tool Aid: If none of the above methods work, you can use some tool aids, such as rubber pads, rubber gloves, fine nose forceps, etc., to hold the lid and twist it firmly to open the lid.
Be careful not to use too much force to avoid damaging the rice cooker or injuring yourself. If none of the above methods can solve the problem, it is recommended that you contact the manufacturer of the rice cooker or the after-sales service center for more professional help and advice. I hope this service can help you, thank you for your consultation, and I wish you all the best!
-
1. Rotate the lid clockwise, if the lid moves, it means that there is no air pressure in the pot, and the main reason why the pot cannot be opened is that there is no return to stop the opening and prevent the lid from being opened. The solution is to use a hard object such as chopsticks and put the lid on"Open the lid and lock the valve"Press down firmly and press the check valve.
Push the check valve back into place to open the lid.
2. If you rotate the lid clockwise and do not move, it may be that there is still air pressure in the pot, and the rice cooker cannot be opened is a protective behavior, and it must be cooled and relieved if you want to open it. If you are not in a hurry, you can wait for the rice cooker to cool naturally and release the pressure, and generally do not need to lift the pressure to vent the pressure. If this method is not used, attention should be paid to the gas emitted from the vent at the top of the pressure felling.
-
1. Use chopsticks to press down the "opening and locking valve" on the lid and press it into place, and then rotate it in the direction of opening to the position of opening the lid to open it.
2. Rinse with cold water until it can be opened.
3. Find the (on-off) position on the lid of the pot with one hand, grab the other side with one hand, and slowly exert force along the direction of opening.
-
The lid of the rice cooker can't be opened, first of all, you have to see if the water vapor inside has not been emptied, and then it can't be opened, you can cool it down and then open it.
-
The lid of the rice cooker can't be opened, which means that the gas inside has not been cleaned, so. I can't open it. The caress exhaust valve puts the steam in and opens.
-
Press hard to see if it's broken, and if it's broken, take it to a repair shop to fix it.
-
The lid can't be opened, you can use a vise.
-
Taking Midea's pressure rice cooker as an example, the reasons and solutions for the rice cooker not opening are as follows:
1. Can't open after cooking: it means that there is pressure inside, the float has not fallen, the lid is locked, and it can't be opened, if this is the case, you can cancel the insulation, and when the internal pressure is close to the atmospheric pressure, the float falls, the lid is unlocked, and it is opened, if there is no viscous liquid in the pot, you can manually exhaust to cool down and relieve pressure and open the cover, if there is viscous liquid in the pot, it is not appropriate to manually exhaust to avoid liquid splashing;
2. It cannot be opened after unplugging the power halfway: as long as there is a certain amount of steam, the electric pressure cooker will open the safety pin, so as to interlock the lid and the body of the pot, only when the temperature inside drops, that is, the steam pressure becomes weaker, it is possible to open the lid of the pot, do not force the lid to open; The quick opening method is to rotate the red knob on the lid of the pot, the steam will leak out quickly, when there is no steam in the lid and then leak out, the lid can be unscrewed, it cannot be opened because the rotation does not completely reach the position of opening, due to the forced upward pull, the edge is stuck, resulting in the inability to open, you can hold the lid with both hands and gently rotate along the direction of opening, slowly the gap will become larger, the hand can go in, unscrew the handle screw in the lid, you can open it;
3. If the lid cannot be opened after the pressure is relieved, you can use a chopstick to press the check valve to check whether the check valve has fallen, and the lid can be opened when the check valve is returned.
This answer applies to most pressure rice cooker models such as Midea, Gree, Haier, etc.
-
Here's how an electric pressure cooker can't open the lid:1. The reason why the electric pressure cooker can't open the lid may be that the pressure is not completely relieved after the heating is completed, as long as you wait patiently and the pressure relief is completed, the problem can be solved. However, it should be noted that in this case, do not forcibly open the lid of the pot, otherwise the steam will spew out and it will be easy to hurt your hands.
2. a safety valve.
The increase in resistance between the electric pressure cooker and the lid may also lead to the failure to open the lid of the electric pressure cooker, because the electric pressure cooker is used for a long time, and the possibility of failure is high, even if the pressure drops to the normal value during use, the resistance between the safety valve and the lid is large, resulting in the safety valve can not be lowered to the normal position, this situation will also occur. When repairing, you can poke the safety valve with chopsticks to remove foreign objects, so that the gap is smaller, and the lid can be opened normally.
3. The lid of the electric pressure cooker cannot be opened, and the solution is to flush with cold water and use thermal expansion and contraction.
How to open the lid of the pot, or grasp the position on the lid with one hand, and grab the other side with the other hand to unscrew it vigorously, but finally wait for it to cool before operating.
4. If the check valve is not returned and cannot be opened, find a hard object and check the valve.
Press it once and the check valve can be opened.
-
Step 1, rotate the lid clockwise, if the lid is moving, it means that there is no air pressure in the pot, and the main reason why you can't open the pot is that there is no return to the position, preventing you from opening the lid. The solution is that you can find a hard object, such as chopsticks, and press the check valve to make the check valve return to position to open the lid; What should I do if the pressure cooker can't open the lid Step 2, if you rotate the lid clockwise and don't move, it may be that there is still air pressure in the pot, and you must cool it and relieve the pressure. The methods of pressure relief are generally natural cooling, wind blowing cooling and lifting pressure felling.
If you are not in a hurry to boil the pot, it is best to use the natural cooling method to relieve pressure; Step 3, the main reason for not opening the lid is that the lid is not cleaned in time, there are too many foreign bodies attached to the lid, the residue in the lid should be cleaned in time and often to ensure that the lid is clean; Step 4: If you have made sure that the pot has been fully cooled and there is no air pressure, you can try to find the (on-off) position on the lid with one hand, grab the other side with one hand, and slowly press hard in the direction of opening, and then push harder, it will open without damaging the pressure cooker.
Or: Enter in the ledger.
echo off >>>More
<>2. Install and run the DXF documenter, click the "Open" button, you can select the "Enable Preview" button to preview the DXF document you want to view; >>>More
Please check whether to activate Tenpay first, if you are sure that Tenpay has been activated, but it cannot be opened, please try again later, maybe it is a network problem.
You just follow the steps and it's OK to do it step by step. >>>More
1.Native Encryption: High Intensity Folder Encryption Master Transfer all files in the folder to be encrypted to recycled s-1-5-21-1060284298-811497611-11778920086-500 info2 di1 com1 >>>More