CAD can t open the DXF file, what should I do?

<>2. Install and run the DXF documenter, click the "Open" button, you can select the "Enable Preview" button to preview the DXF document you want to view;

3. After opening the DXF document, switch to the "Viewer" tab, click the corresponding tool (such as "Box Selection Zoom") in the "Location" list, and select the local area to zoom in.

Internal data is corrupted. You can try to fix it, pay attention to the backup:

1. File --- drawing is repaired using the program ---.

2. Change the suffix to dwg

3. See if the CAD version is different. The lower version can't hit the high.

In the same situation, I used CAD2008 to generate DXF, and I can open it again with CAD2008.

I used Notepad to open DXF, modified a coordinate data after saving, and then opened it with CAD2008, and found that it could not be opened.

However, it turned out that the 2007 version of DXF with Notepad could not be opened again after modification, but it could continue to be opened after saving with 2004 version of DXF Notepad.

Ha ha!!!

There is no effective way, you must first find out the reason why it can't be opened, and see if there is a problem during the conversion or the reason why the software version is too low.

1. What software generated.

2. Open the file with Notepad, if it is text, find 786 lines and fix it by yourself.

3. Try it with domestic CAD.

4. Try it with CAD2004.

5. Is it convenient to send drawings? Stay QQ

1. Create a new CAD file, 2. Paste and copy the content to be used in the education version into the new CAD, 3. Save as DXF, 4. Open DXF and save as CAD, 5. Get it.

The reason is that the source DWG file has been converted to a DXF file, and you need to re-use CAD to copy and paste it as a CAD file by default and save it as a DXF file to solve the problem.

Take CAD2007 operation as an example:

1. Open the DWG file you want to convert, then create a blank DWG file, and click the file-new command.

<>4. Ctrl+V to paste some objects into a new file.

5. Then paste it at this time, and select the save type of the file as "dxf.""Format.

6. Finally, close the file, and then open the file, you can open the dxf file, so that the operation can solve the problem.

The CAD2018 software can open DXF files, and the subject can try to upgrade the software. For specific operations, please refer to the following steps, the demonstration software is CAD2018.

1. First open the CAD software on the computer, and then click the "Start Drawing" option on the home page to enter the drawing page.

2. Then in the menu option "Insert" page, execute the insert option.

3. Then in the window that appears, click the browse button to find the file.

4. Then find the target DXF file in your computer, select it, and click to open it.

5. After returning to the insert page, check some alternate settings, so that some coordinate points in the drawing will be fixed with the selection of the mouse.

6. After confirmation, go back to the drawing page, and then click the first point with the mouse to fix the graphics coordinates.

7. Then drag the mouse, the figure will be enlarged and reduced with the size of the mouse, and click the second point after selecting the size.

8. Then rotate the mouse, the figure will rotate accordingly, and double-click the mouse after determining the rotation angle to fix the third point.

9. After confirmation, you can successfully open the DXF file with CAD software.

CAD can't save the DXF format because the steps of saving are wrong, and the specific solution is as follows:

1. Open the AutoCAD2004 software.

2. Open the file you want to save in DXF format.

3. On the command line, type: dxfout, space or enter.

4. The "Graphic Save Dialog Box" pops up.

<>5. Mouse selection and click: "Options", pop up; In the Save As Option dialog box, select DXF Options.

<>6. Check the "Select Object" button and click: "OK" to exit the Save As option dialog box.

<>7. Click: "Save" to exit the Save as Drawing dialog box, select the image file you want to save (you can select more than one), and after the selection is completed, press "Space, Enter or right-click the mouse button" to end the save local image file as command.

<>2. Install and run the DXF documenter, click the "Open" button, you can select the "Enable Preview" button to preview the DXF document you want to view;

3. After opening the DXF document, switch to the "Viewer" tab, click the corresponding tool (such as "Box Selection Zoom") in the "Location" list, and select the local area to zoom in.

1. Open the dwg file you want to convert to DXF format.

2. At this time, create a new blank dwg file, and select the "New" command under the "File" menu.

3. In the "New" window, create a new dwg file.

4. Select all objects in the original DWG file and copy them with CTRL+C.

5. Go back to the new dwg file and Ctrl+V to paste some objects into the new file.

6. Then select the "Save As" command under the "File" menu, and select the save type of the file as "DXF"."Format.

7. Close the file, and then open the file, we will find that the dxf file at this time can be opened. This solves the problem that when opening DXF, the input is invalid or the incomplete drawing is abandoned.

There was an error in the storage of the CAD.

Solution: Open dxf and save dwg. In order to reduce the size of the file or facilitate unified modification in the future, you should define the specified drawing as a block with the block command, and then use the insert or minsert command to insert the block.

Expanded Discussion Materials:

CAD certification

In order to thoroughly implement the spirit of the 17th National Congress of the Communist Party of China on "vigorously promoting the integration of informatization and industrialization, and promoting the industry from large to strong", accelerate the pace of industrial and information technology personnel training, and meet the needs of the national economic and social informatization development for industrial and information stool technical talents.

Our center decided to carry out the "National Computer-Aided Technology Certification" project (referred to as the CAXC project). The project is mainly for teachers and students of various colleges and universities, vocational and technical colleges across the country, as well as social personnel who want to work in computer-aided design (CAD), computer-aided engineering (CAE), computer-aided manufacturing (CAM), computer-aided process planning (CAPP), product data management (PDM) and other related industries.

With the purpose of improving the vocational skills of teachers and students and all kinds of engineering and technical personnel in colleges and universities, we help students master the necessary knowledge and skills for employment through professional and systematic skills course training and certification. The CAXC project will play a positive role in improving the evaluation system of industrial and information technology talents and accelerating the cultivation of interdisciplinary talents in industrial information technology.

Encyclopedia-cad

Encyclopedia-dxf

<>2. Then you can double-click with the mouse to open and install the software, and then you can select the "CAD version" on the left side of the excitation to open the conversion option.

3. After the selection is completed, you can add the text, you can directly drag the piece over, or you can directly click the "Add File" button to add the file.

4. After adding the file, you will enter a new interface, and you can also select the file input path, click the "browse" button at the top of the interface to select the save path.

5. Select an output type in the "Output Type" below, then click the inverted triangle after "Output Version", and select the output version in the drop-down box that appears.

6. After all the lead fingers are selected, you can click the "batch conversion" button below, so that the piece will start to convert, and wait for the progress bar to become 100% to say that the file has been converted.