The cooker won t start. The induction cooker light is on but does not start

There are components in the internal circuit that are damaged. If you can't solve it yourself, it's better to send it for repair.

I suggest that you remove the board, take it yourself and rinse it and then use the sun to dry it, or you can use a hair dryer to dry it, and you must dry the board with a hair dryer, otherwise it will burn the board after powering on. In your case, there are oil stains on the circuit board that cannot be used in humid weather, and you can use it as soon as you blow it through the hair dryer. Do what I've done above.

First see if the voltage is normal or not, and then see if you can check the pot. If there is a hint of Midea's induction cooker failure, take a look at the manual.

It may be that the temperature characteristics of the thermistor in the middle of the wire reel or on the power tube are not good, try another one.

Why don't you start the method? Is it the kind of situation where the fan keeps spinning? Induction cooker is broken, generally to burn the heat pipe, load capacitor, and then the switch board and its wiring, you can also repair household appliances, they will generally delay you for a long time, and the cost will not be a lot.

Probably due to poor contact of the circuit in the machine.

Because of the sound of sizzling, it may be the virtual welding of the connection end of the wire reel, and the virtual welding of the power incoming line 5UF capacitor virtual welding, all in all, 80% is caused by virtual welding.

The fuse of the induction cooker is the most likely to break, and the famous brand will generally have an automatic short-circuit protector that protects the circuit, and it may be a problem with the socket, try to change the socket.

The resistance inside must have melted. Gotta repair.

Did you leak water?

Maybe the wires in your induction cooker are useless.

It may be that some component is not working properly below 0°.

Alas, send it to a professional repair department, and buy it in**show.

Try it with a warming machine!

The reason why the induction cooker light is on but cannot be started is as follows:

Resistor Damage:There is a circuit board inside the induction cooker, and there are several large resistors on the circuit board, if these large resistors are damaged, the induction cooker will not be able to work normally, and the indicator light will be fully lit but not started.

Sensor Damage:Like many electrical appliances, the induction cooker also has a sensor, if the sensor is damaged, then the program of the induction cooker can not operate normally, and there will also be the phenomenon that the induction cooker is energized but not started.

Induction cooker switch problem: The switch of the induction cooker is the first step to start the induction cooker, when the switch of the induction cooker loses its efficiency, the induction cooker can not start normally. Therefore, a broken switch button is also a big reason.

At this time, you need to go to a professional maintenance office to replace the new switch button.

Induction cooker inlet water burns out the heating plate:Due to improper use of water inside the induction cooker, it will wet the heating plate and cause a certain degree of damage, once the heating plate is damaged, the induction cooker will not work when it is opened, and it will not be able to start smoothly. In addition, improper cleaning of induction cooktops can also cause water ingress, causing the same result.

Therefore, it is necessary to pay attention when using it and try to avoid the occurrence of water accidents.

Poor contact:The plug-in head of the induction cooker is in poor contact with the power socket, resulting in frequent power failures, which will affect the induction cooker and cannot be started; The plug-in head of the induction cooker is disconnected from the induction cooker body, and the circuit failure will also occur if the contact is not tight, which will then cause the problem that the induction cooker does not work.

The solution to the induction cooker is powered on but cannot be started is as follows:

First, the circuit problem

If the induction cooker can't be started, the first thing to consider is whether it is a circuit problem. When there are too many household appliances, the circuit will be loaded, the voltage will be unstable, or the circuit will have a short circuit, which will cause the induction cooker to not start normally. In this case, it is necessary to ensure that the voltage is higher than that of the induction cooker to reduce the load of household appliances.

2. Poor contact

The plug-in head of the induction cooker is in poor contact with the power socket, resulting in frequent power outages, which will affect the induction cooker and cannot start Qi Pei; The plug-in head of the induction cooker is off the line with the induction cooker body, and the circuit failure will also occur if the contact is not close, which will then cause the problem that the induction cooker does not work. In this case, you just need to double-check the power supply or re-strengthen the plug-in cable.

Third, the problem of induction cooker switch

: The switch of the induction cooker is the first step to start the induction cooker, when the switch of the induction cooker loses its efficiency, the induction cooker can not start normally. Therefore, a broken switch button is also a big reason. At this time, you need to go to a professional maintenance office to replace the new switch button.

Fourth, the induction cooker inlet water burns out the heating plate

Due to improper use of water inside the induction cooker, it will wet the heating plate and cause a certain degree of damage, once the heating plate is damaged, the induction cooker will not work when it is opened, and it will not be able to start smoothly. In addition, improper cleaning of the induction grill can also cause water to enter, resulting in the same result. Therefore, it is necessary to pay attention when using it and try to avoid the occurrence of water accidents.

Fifth, the aging of induction cooker

Long-term use of the induction cooker will cause wear and tear of internal parts, and some functions will be lost or completely lost, and it will not start normally at this time. When the induction cooker is not used for too long, the internal parts will also be corroded and rusted due to moisture, and the induction cooker will basically not be used, and there will be a phenomenon of not starting.

Induction cooker is a new type of electric heating stove, which uses the principle of electromagnetic induction to cook food, so it has the advantages of fast, safe, efficient and energy-saving. But in the process of using the induction cooker, sometimes we may find that the induction cooker cannot start, and then we need to find out the problem and solve it. The following are the reasons why the induction cooker won't start and how to fix it:

1.Poor power contact: If the cooker does not start, the first step is to check if the power supply is normal.

Sometimes the power supply may not be plugged in tightly or the socket may be loose, causing the cooker to not start. At this time, we only need to check the power connection and replug the collapsed power cord.

2.Improper operation: The induction cooker cannot be started, and there is a reason for the improper operation.

When using an induction cooker, some people may forget to turn on the switch or set the time, or misuse the keys when using it, which will cause the induction cooker to fail to start. At this time, you only need to follow the manual of the induction cooker to re-operate.

3.Circuit failure: If the induction cooker does not start, it may be caused by a faulty circuit. At this time, it is necessary to check whether the circuit board and power adapter are normal, and if a fault is found, it needs to be replaced or repaired in time.

4.Induction cooker temperature is too high: In the process of using induction cooker, if the temperature is too high, it may cause the induction cooker to fail to start. At this time, you can unplug the induction cooker first, wait for a period of time and then plug it back in, and then restart the induction cooker.

5.Damaged circuit: If none of the above solutions work, it may be caused by damage to the circuit of the induction cooker. At this time, it is necessary to ask a professional to inspect and repair the induction cooker.

In short, when the divergent state search induction cooker cannot be started, it is necessary to first check whether the power connection and operation are correct, and then check the circuit fault and line damage. Just find out what the problem is and take appropriate measures to solve it.

1. What is the reason why the induction cooker can't start?

1. There may be a problem with the display board. In this case, you need to cut off the power supply of the induction cooker, check whether there is a problem with the circuit between the display board and the motherboard, and check whether the gap between the buttons on the display board and the panel is too large. Then check whether the power supply of the display board can be started normally.

2. If none of the above problems exist, then the problem may be an integrated block, or a digital display and caller.

3. There may be a problem with the main control board, and then you need to take the induction cooker to a professional maintenance shop for repair and replace it with a new main control board. If you are too troublesome, you can directly change to a new induction cooker.

Second, how to maintain the induction cooker is not easy to damage.

1. The place where the induction cooker is placed needs to be horizontal, and there should be no corner hanging in the air, otherwise when the soup is cooked in the later stage, it is easy to overflow the soup, resulting in the risk of scalding.

2. The air inlet and outlet of the induction cooker need to be smooth, and the induction cooker will continue to heat up during operation, so it is necessary to keep it in the position of air circulation to ensure safe use. At this time, try not to place items around the induction cooker to avoid obstructing air flow.

3. The weight of the pot should also meet the load-bearing capacity of the induction cooker, generally speaking, the food with the pot should not exceed 10 catties. And the bottom of the pot should not be too small, so as not to lose the concentration of fire.

4. When the induction cooker is used, it is necessary to take waterproof and moisture-proof measures to avoid affecting the normal use of the induction cooker. Moreover, it is strictly forbidden to clean the induction cooker with water to avoid short circuit.

I concluded: what is the reason why the induction cooker can't start, and how to maintain the induction cooker is not easy to damage, I will introduce it here, do you understand? In the process of using the induction cooker, it is necessary to do a good job of maintenance work to avoid damage and affect normal use.

Induction cooker is an advanced kitchen appliance that uses electromagnetic induction technology to heat food, which has the characteristics of high efficiency, safety and energy saving. However, sometimes the induction cooker does not respond when it starts, and here are some possible causes and how to fix them.

1.Power failure. Check whether the power switch is on, whether the plug is loose or the socket is faulty, sometimes due to power-related problems that cause the cooker to not start properly. After troubleshooting the power supply, try restarting the Hongzhi induction cooker.

2.Faulty electronic components. This is a more common fault hit the key, the electronic components of the induction cooker are affected by voltage, current and other factors, and are prone to short-circuit, open circuit and other problems, resulting in no response to start-up.

If this situation cannot be handled, it is recommended to seek professional repair, and do not use the induction cooker to put the voltage too high or too low.

3.Induction coil failure. Ask a professional maintenance personnel to check whether the induction coil has any items torn everywhere on the radiator, etc., due to the influence of laughter.

4.Operational issues. Operation error is also a situation, if the temperature is not adjusted correctly, or in two heating areas at the same time, the induction cooker may not be able to start or run normally, so be sure to read the manual carefully and operate according to the actual situation, otherwise it will cause irreversible problems in the later stage.

In short, if the induction cooker starts without response, first check the normal condition of the power supply and line, if there is an exclusion problem, please call the service**, and when using the induction cooker, you must comply with the operation specifications, do not blindly use the high temperature for the sake of speed, otherwise it may cause damage to the induction cooker.

Induction cooker is a common kitchen appliance, although it is small in size, it is flexible and convenient to use, can achieve rapid heating, and is a multi-functional electrical product. In use, we often encounter the situation that the induction cooker does not work, the induction cooker can be powered on but cannot be started. What should I pay attention to when using an induction cooker?

The induction cooker can be powered on but not started, which is why the rubber head.

Perhaps it is caused by poor contact of the function keys of the induction cooker; Maybe the fuse inside it was damaged or broken; Maybe its transformer is malfunctioning; Maybe its power cord was broken or damaged; Perhaps its power crystal is faulty, and in either case, it needs to be repaired by a professional in time.

What should I pay attention to when using an induction cooker?

1. The power cord should meet the requirements.

Due to its large power, you need to use a matching power cord and a dedicated socket to avoid problems such as tripping and socket burning when in use.

2. It should be placed smoothly.

When in use, it should be placed on a neat and clean horizontal surface, and no flammable and explosive materials should be placed around. Especially when cooking hot pot, if the induction cooker is tilted, the soup in the pot will easily flow out, causing problems such as scalding. In addition, if the induction cooker is not placed steadily, the vibration it produces during work is also easy to cause the pot to slip off.

3. Clean the stove frequently.

When the induction cooker is cooking, there are often oil stains, sauces, etc. sprinkled on its surface, after turning off the induction cooker, we need to wipe it clean with a soft cloth dipped in some detergent, so as not to damage the function buttons caused by some liquid.

4. Use special pots and pans.

Since the induction cooker is energized, it is very different from the gas stove, in order to ensure the safety of use and its performance, it is recommended that you need to choose a special cooker for the induction cooker.

Words: The above introduction to why the induction cooker can be powered on but cannot be started is here, I hope to give you some reference, more related content, please pay attention to Qijia information.

If the induction cooker cannot be turned on when it is powered on, there may be several reasons:

1.Power failure: Check whether the power cord is firmly connected, whether it is damaged, and whether the power plug is well plugged in. If there is a problem with the power supply, you can try replacing the power supply or find a professional to repair it.

2.Control panel failure: If the control panel fails, the cooker will not turn on. You can try to press the reset button or the deheater button on the panel to reset, if it still does not solve the problem, you need to find a professional to overhaul it.

3.Power overload protection: If the induction cooker suddenly loses power when it is working, it may be because the power overload protection has worked. At this time, you need to wait for the induction cooker to cool down before turning on the power again.

4.Short circuit of the circuit: The short circuit inside the induction cooker may also cause the machine to fail to start. In this case, it is necessary to find a professional to overhaul it.

5.Fan failure: The induction cooker needs to be dissipated by the fan when it is working, and if the fan fails, the induction cooker cannot be used normally. You can try to clean the fan, if the problem persists, you need to find a professional to repair it.

In short, if the induction cooker cannot be turned on, it needs to be checked in time, and it should not be disassembled or repaired without permission, so as not to cause greater damage.