Induction cooker maintenance skills, induction cooker maintenance skills

Almost every family will buy an induction cooker, the help that the induction cooker brings to our lives is very great, it heats up very fast, generally people use it to make hot pot more, but it will break down after a long time, thenInduction cooker repairsWhat are the tips for that? How to maintain the induction cooker? Let's introduce it to you.

First, the skills of induction cooker maintenance.

1.Do not sit in the pot during the test machine, and at the same time connect the 25-watt incandescent lamp in series in the power supply circuit of the induction cooker to prevent the internal short circuit from exploding the machine, which will expand the fault. At this time, observe the brightness of the bulb, if the brightness is normal, it means that the inside has been short-circuited.

If the bulb is flashing, it means that the oscillation circuit is basically working normally.

2.Open the cover to detect the resistance of each way, starting from the gating tube, including the rectifier bridge stack, high-power resistance, 4UF, etc., try to measure with a pointer multimeter, and the measurement can be carried out with one end of the solder absorber.

3.Most of the causes of this failure are caused by damage to the IGBT itself or problems with the synchronization, oscillation, and drive circuits. Due to the seriousness of this fault, it is generally damaged with other components, such as IGBT and rectifier bridge stack are also broken down together, after replacing the new fuse, do not immediately connect the power supply to test the machine, otherwise it may cause the fuse to burn again.

Second, how to maintain the induction cooker.

1.The correct way to clean your induction cooktop is to use a mild, mild detergent and use a soft cloth for a delicate wipe.

Do not use steel wool, hard scouring pads and other hard objects to wipe or brush the panel of the induction cooker, so as not to cause damage to the panel. If you encounter oil and scale that are difficult to deal with, you may wish to use some special cleaning agents to decompose or soften the key parts of the pollution locally, so that it will be much easier to clean.

2.Install dedicated power cords and electrical outlets. Due to the high power of the induction cooker, the power cord and socket must be configured according to the power, usually the copper core wire that can withstand the current of 15A should be selected, and the socket, plug, switch, etc. used should also meet this requirement.

Otherwise, the high current when the induction cooker is working will cause the heating of wires, sockets, etc., to burn and short-circuit.

Induction cooker is also more popular now, the general family will be installed, but now the brand of induction cooker is different, so the skills of induction cooker maintenance and how to maintain, I think after reading the above introduction, everyone also understands such a problem.

Visual inspection, test inspection, replacement parts.