Where is the air energy all in one machine installed, and can the air energy water heater all in one

It can only be installed indoors!

The location selection of the household air energy all-in-one machine.

Preferred: In the enclosed balcony, the enclosed balcony is a semi-open space that can be controlled independently; The water heater can be used as an air conditioner in summer (suitable for lunch breaks) and a fresh fan to replace air in winter, which is an excellent installation location. Customers in the Northeast region who have a strong desire must install in this location.

Second choice 1: Outdoor terrace, the terrace in front of and behind the house of a large house is also very suitable for installing air energy, which is convenient and safe.

Secondary choice 2: air conditioning stands, generally houses have air conditioning stands, this location is also very suitable for installing air energy with a slight improvement, if you encounter a relatively narrow air conditioning seat can not be installed.

Secondary option 3: Small platforms, beams and columns outside the wall, water heaters may need to be reinforced in these locations.

Secondary choice 4: roof platform, the original location where solar energy can be installed air energy, pay attention to the hot and cold water pipes, and the power socket must have a waterproof box (you can ask for a gift when buying a warm Yang brand.)

Secondary option 5: Bathroom, kitchen, if the bathroom or kitchen is relatively spacious, it can also be installed in these places, but attention must be paid to the arrangement of drainage facilities.

Tail selection: wall-mounted installation, there is a certain danger in wall-mounted installation, and customers try not to choose, on the grounds that it may fall down when encountering vibrations such as **; If the customer insists on hanging on the wall installation, it is preferred: the closest location of the kitchen under the same conditions is preferred, the kitchen with the highest frequency of hot water use, followed by the public toilet, the closer the distance, the less cold water; Over the course of a year, 50% of the hot water is used in the kitchen.

Air Source Water Heater Drainage Facilities:

The installation of air energy water heater has condensate discharge during use, so the installation location should have floor drains, ditches and other facilities that can drain water.

Air Source Water Heater Meter Installation Location:

The instrument, that is, the control panel, needs to be installed nearby to avoid rain; Due to the fact that most of the operation modes are selected in "economy mode", the control panel is actually rarely operated, and it is not necessary to install it in a very conspicuous position, and it can be installed on the wall of the balcony and corridor.

Air source water heater water pipe arrangement:

The inlet and outlet pipes of the air energy water heater are preferably 25ppr pipes (commonly known as 6 pipes), and the screw mouth of the water pipe is still 4 points; The air energy water heater is the best water heater, and the outlet pipe is actually the main pipe, and the diameter should be larger, so as to avoid the phenomenon of "hot and cold". For customers who install the return water device, the diameter of the return pipe is only 4 points.

Dear, Good afternoon, I'm glad to answer for you: the air energy water heater is an all-in-one machine that can be installed indoors. But install it in a relatively open place, such as:

Basement and balcony. When the water heater is running, it needs to absorb a lot of hot air from the surrounding air to achieve the heating effect. If it is installed in a confined space, the temperature of the water heater will be lowered, which will affect its working efficiency.

Therefore, it can be placed on the balcony, which will not take up space and will not affect the use of the water heater. I hope mine can help you, if there is a place where you are not clear, please consult further, and finally wish you good health, a happy family, and a smooth work<>

Summary. Dear, can the air energy water heater be installed indoors? As follows:

The integrated air energy water heater is suitable for indoor installationThe integrated air energy water heater is beautiful in appearance, tasteful, high grade, small in size, and suitable for indoor installation. The all-in-one machine is the integration of the main machine and the water tank, and it can be used when it is connected to the water pipe at the inlet and place during installation, and the installation is convenient. The installation is relatively simple, generally only need to connect to water and electricity, it can be turned on and used, independent and complete body, lower noise, all moving parts are built into the machine, quiet operation.

Dear, can the air energy water heater be installed indoors? As follows: the integrated air energy water heater is suitable for indoor installation The integrated air energy water heater is beautiful in appearance, tasteful, high grade, small in size, and suitable for indoor installation.

The all-in-one machine is the integration of the main machine and the water tank, and it can be used when it is connected to the water pipe at the inlet and place during installation, and the installation is convenient. The installation is relatively simple, generally only need to connect to water and electricity, it can be turned on and used, independent and complete body, lower noise, all moving parts are built into the machine, quiet operation.

Installation location: The integrated air energy water heater is generally suitable for use in kitchens, balconies, bathrooms and other areas. Install as close to the wall as possible to facilitate installation; Proximity to the source and location of the water is needed to reduce the length of the line.

The installation steps of the air energy water heater are as follows:

1.Select the installation location: The air energy water heater should be installed in a well-ventilated, dry, and water-free place, close to the water source and power supply.

2.Mounting bracket: According to the size and weight of the air energy water heater, select the appropriate bracket for installation.

3.Install the water pipe: Connect the water pipe to the water inlet and outlet of the air energy water heater, and pay attention to the use of sealant pads to ensure that the water pipe connection does not leak.

4.Install the power supply: Connect the power cord of the air energy water heater to the power outlet, taking care to be grounded.

5.Connect the exhaust pipe: Connect the exhaust pipe to the exhaust port of the air energy water heater to ensure that the exhaust pipe is unobstructed.

6.Check the installation: Check whether all connections are secure, whether the Changsen exhaust pipe is unobstructed, and whether the power supply is grounded.

7.Test run: Turn on the power of the air energy water heater, adjust the temperature, and observe whether the water heater is working normally and whether there are water leakage and other problems.

8.Use and maintenance: When using an air energy water heater, pay attention to cleaning the filter screen regularly to keep the ventilation good and avoid the accumulation of scale caused by non-use for a long time.

After buying a water heater at home, the next step is to consider how to install it. How to install the air energy water heater? PChouse will take you to find out.

1. The determination of the installation location, the most important thing for the family use of Pujing Tutong is to install it on the roof or balcony, and we pay special attention to this place. Some air energy water heaters are used at home due to different conditions of use or different fuselages, so it can be installed in the bathroom or in the corners of the relationship. The installation site should not be filled with sulfur gas and mineral oil, so as not to corrode the body and accessories of the air energy water heater.

2. After the specific position is determined, you can operate and fix the position of the water tank, and the placement of the water tank should be installed upright in a sitting position, and the safety valve should be kept the same as the atmosphere, and there should be no blockage.

3. Finally, connect the water pipe, and you can use it directly when you connect it.

Air energy water heater is a kind of water heater that many people will choose because it is more energy-efficient, does not use gas, and has no risk of leakage and fire. Especially if there are many people who use water and the house is relatively large, installing an air energy water heater is a very good choice. So how to install an air energy water heater?

2. Host installation The installation of the main host of the air energy water heater is similar to the installation of the outdoor unit of the air conditioner. Always make sure it's installed in a secure place and that the display panel isn't installed in the bathroom.

3. Water storage tank installation The water storage tank must be installed on the ground, and the installation site can bear a weight of 500kg.

4. Pipe connection According to the design, install the pipeline of the air energy water heater, and check the connection of each pipe and the opening of the bottle cap with soapy water after installation to avoid water leakage.

5. Test machine after installation After the installation is completed, the system inspection of each pipeline and circuit system is carried out, and then the power supply is turned on to set the thermostat to test the air energy water heater.

It is recommended to find a professional to install it.

Preferred: Enclosed balcony, which is a semi-open space that can be controlled autonomously; This is an excellent location for installing a water heater as an air conditioner in the summer (suitable for lunch breaks) and as a fresh fan in the winter. Especially in the Northeast.

Secondary option 1: Outdoor terrace. The terraces at the front and back of the large apartments are also very suitable for installing air energy, which is convenient and safe.

Second choice 2: Air conditioning stand. Generally houses have air conditioning spaces. This location is slightly improved and is also ideal for installing air energy. Narrow air conditioning units cannot be installed.

Secondary option 3: Small platforms, beams and columns outside the wall, if you install a water heater, you may need to reinforce.

Secondary option 4: roof platform, where solar energy can be installed in the original location. Note that there must be hot and cold water pipes, and the power socket must have a waterproof box.

Option 5: Bathroom, kitchen, if the bathroom or kitchen is more spacious, it can also be installed in these places, but be sure to pay attention to the layout of drainage facilities.

Tail selection: wall-mounted installation, this kind of risky, try not to choose. The reason is that it may fall when encountering situations such as **.

Priority: Kitchens with the same conditions are given priority to choose close proximity. Hot water is used most in kitchens, followed by public toilets. The closer you are, the less cold water there is. The water heater used 50% of the hot water in the kitchen that year.

1. Energy saving, because the thermal efficiency of air energy water heater is as high as 300%-500%, which is 4-5 times higher than that of ordinary water heaters, so the cost of hot water production is very low, which also saves electricity. The daily electricity bill for an air energy water heater is 1-2 yuan. Compared with general water heaters, it can save about 70-80% of the monthly electricity bill.

2.Convenient and comfortable. Regardless of rain, rain or snow all year round, automatic hot water is provided 24 hours a day, which is more convenient than general solar water heaters.

3. Efficient dehumidification, with a maximum dehumidification capacity of 6-8 kg 24 hours a day. The effect is more pronounced in the rainy season and rainy weather, especially in the humid weather in the south.

The installation method of air energy water heater is divided into 9 steps.

Commonly used tools: electric hammer (including drill), adjustable wrench (one each of 250 and 300 types), screwdriver (one each of "ten" and "—" type, needle-nose pliers, wire cutters).

Special tools: PP-R pipe fuser, pipe cutter, pipe wrench.

1. Prepare the main machine water tank, prepare the installation tools, water tank, and main engine.

2. Random fittings, refrigerant pipes, elbows, tapes, cable ties, pressure relief valves, internal elbows and tees, ball valves, check valves, aluminum-plastic pipe joints, T-type filters.

3. Drainage pipe, aluminum-plastic pipe, the refrigerant pipe and the temperature probe wire are tied tightly with a cable tie, and the two ends of the refrigerant pipe are separated in Y shape for easy installation.

4. The thick end is the inlet refrigerant port, the thin end is the refrigerant outlet, the water pressure base is installed, and all the interfaces are wrapped with tape to prevent water leakage, and the hot water outlet is connected to the pressure relief valve and tightened with a wrench.

5. The pressure relief valve is downward, connected to the aluminum-plastic pipe joint, the cold water inlet is connected to the check valve (pay attention to the installation direction, the arrow direction is facing inward), connect the aluminum-plastic pipe, wrap the tape on the water pipe interface, and connect the aluminum-plastic pipe interface.

6. Connect the hot and cold water pipes, install the host bracket, drill holes, and fix the bracket.

7. Lift the host onto the bracket, fix the host with screws to prevent it from falling off, insert the temperature probe into the water tank, tighten it with screws, and connect the temperature sensing head line.

8. Connect the host control line, connect the power supply, pay attention to the installation must be grounded, connect the refrigerant pipe, tighten the screws with moderate strength, and use the aluminum-plastic pipe to connect the cold water and hot water outlet of the water pipe to the corresponding pipe.

9. In the process of discharging water, the pressure of the water tank is very large, you can unscrew the pressure relief valve, install the condensate drainage pipe on the host, empty the host, open the control panel of the host, connect the switch button to start the machine, and the installation is completed.

The air can be used for hot water, and the water pipes and sewage outlets are located.