The all in one mobile phone is flooded, but it can be used normally, can it be used continuously?

If the mobile phone accidentally gets into the water, you can try the following ways to deal with the mobile phone urgently to avoid secondary injury:

1. Please take the mobile phone to a dry and ventilated place as soon as possible, and use a dry paper towel or towel to blot the water stains on the surface of the mobile phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please remove the SIM card and microSD card as soon as possible.

4. Please bring your mobile phone to the after-sales department of the mobile phone brand for testing and processing as soon as possible to avoid unnecessary losses.

2. Please do not bake with a hair dryer or stove after water ingress, so as to avoid liquid flowing into the inside of the mobile phone and damaging the mobile phone at high temperatures.

3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

4. During the after-sales maintenance process, the data may be lost, it is recommended to ask the staff how to back up the data.

If your mobile phone is flooded with water or liquid, it is recommended that you do not try to turn it on to prevent damage to the internal components due to a short circuit inside the machine (if the machine battery is removable, it is recommended to remove the battery). It is recommended that you bring the machine to the local Samsung after-sales service center, and the engineer will help you test, and the specific cost is subject to the test results of the service center.

The water ingress of the all-in-one machine can be repaired.

The specific steps are as follows:

Do not turn on your phone immediately after it gets into water.

Wipe the water off the surface of your phone.

Shake the water out of your phone. Pay attention to throwing at the side with many openings. As shown in the figure below.

Use an electric fan or hair dryer to dry your phone. When using a hair dryer to blow a mobile phone, pay attention to the distance between the hair dryer tuyere and the mobile phone, so that the temperature of the blowing on the mobile phone is close to normal temperature. Remember to aim the air vent of the hair dryer at your phone to blow the air.

Place your phone in desiccant to absorb the remaining moisture.

After thorough drying, it can be turned on and used.

1. After the mobile phone is flooded and liquidated, it is recommended that you do not try to turn on the phone again (especially the charging port position), if the power is on, please turn it off as soon as possible, you can press and hold the power button for more than 10 seconds.

2. Because the mobile phone is an electronic product, if the inside of the mobile phone is liquid, although the external water traces are wiped dry, there are impurities in the water, and the impurities will be adsorbed in the mobile phone motherboard and display components, and if they are not removed for a long time, they will be damaged by the components.

3. If you blindly start the machine before cleaning and maintenance, it is easy to cause a short circuit of the components, causing unnecessary losses and dangers. It is recommended to send the phone to the nearest Samsung service center for testing and repair as soon as possible.

When water enters the mobile phone, first remove the battery and use a tissue paper to absorb the stagnant water on the surface. If it is clean water, you can immerse the mobile phone in anhydrous alcohol to absorb the water as much as possible, and then dry the mobile phone (you can use a hair dryer to heat it to volatilize, but avoid high temperature) before use. If water containing electrolytes or even sewage is used, it should be disposed of at a specialist shop immediately.

Workaround:

1. Successively turn the headphone jack and charging port of the mobile phone downwards and pour out the liquid inside.

2. At this time, if conditions permit, you can send the mobile phone to a nearby after-sales point or other repair shop for disassembly, and then air dry the internal water vapor after the power is off.

3. If there is no maintenance point nearby, you can only leave the headphone jack facing down for a period of time, and automatically shut down when the mobile phone is exhausted, and then send it to the after-sales point of the mobile phone in time to disassemble the machine and dry the water vapor.

4. If the mobile phone is seriously flooded, and the battery, internal circuit or motherboard chip and other parts are damaged, the after-sales technician needs to determine the fault point through detection, and repair or replace the faulty parts accordingly.