The computer won t turn on, and it always shows that your computer doesn t start up correctly.

Dell computer can't turn on, the computer can't turn on normally, how to solve the problem.

Here's how to fix your PC not booting properly

1. Try Auto-Repair and select Advanced Options.

<>3. Start the safe mode in the boot settings, which should have the same effect as pressing F8 when you boot up, and then enter the safe mode.

4. Uninstall the update, and select Uninstall the latest quality update.

5. System restore, select the restore point to restore and be prompted that there is no restore point, and be told by professionals that the restore point and mapping are automatically set by the system to the computer when updating.

6. Reset the computer. There is really no way, or you can only choose to reset the computer, although you can keep personal files, but you still can't start, worried about losing files.

The reason why your computer doesn't boot up correctly is due to an abnormal shutdown or an incompatible update patch. Here's how to fix it:

1. Click [Advanced Options] on the pop-up prompt interface;

2. Click [Troubleshooting] in the displayed interface;

3. Click [Reset this computer];

4. Select [Keep My Files] or [Delete Everything] as needed;

4. Click [Only for drives with Windows installed] and then wait patiently for the system to reset.

Consequences of an abnormal shutdown of the computer].

1. Abnormal shutdown is not good for the hard disk, which belongs to the non-positive and often shutdown, which will impact the hard disk, and avoid this shutdown method for the hard disk in reading and writing, otherwise it will cause bad sectors on the disk and affect the service life of the hard disk;

2. If you press and hold the power button to shut down abnormally, it will have no effect, at best, it will lose data and the system will be damaged. However, if you force the power supply frequently, it will be a big trouble, and it is likely to damage the hard drive and burn the motherboard. There are others, such as using a process manager;

3. Hold down Ctrl and turn off with the mouse click, you can achieve an effect, that is, quickly shut down within 3 seconds to 5 seconds, but it will hurt the computer to do so, and sometimes there are even symptoms such as blue screen or black screen, it is recommended to start normally.

1. The computer shows that it is not started correctly (win7 win10), you can try to restart the computer, you can press the host restart key to restart the computer, or press and hold the power button to force shutdown and then reboot, if there is no longer an error prompt and can enter the system operation normally, it means that the computer shows that the computer is not started correctly is only an occasional program or system running error, it does not matter.

2. If there are frequent prompts that the computer is not started correctly and the system cannot be entered normally, press F8 (Win7 Win10) immediately after the computer is turned on to see if the cavity can enter the safe mode.

or the last time the correct mode is configured, if so, the system will automatically repair the registry and recall what was done the first few times the abnormality occurred, and based on the suspicion that it was an application (or driver.

If the problem occurs, uninstall it, then exit normally, and restart it should be able to enter normal mode.

3. If the above methods are ineffective, this is the computer system.

The system needs to be reinstalled.

Note: If C disk.

If you have important data, you need to back it up beforehand). There are many ways to install the computer system, but if you don't know how to install it, you can find a professional to solve it.

Try the following:

1. Enter Windows RE recovery mode.

If you boot three times abnormally, you can enter Windows RE recovery mode. Here's how:

Press and hold the power button for 10 seconds to turn off the device.

Press the power button again to turn on the device.

As soon as you see Windows boot (the ASUS logo appears when it restarts), immediately press and hold the power button for 10 seconds to turn off the device.

Press the power button again to turn on the device.

While Windows restarts, press and hold the power button for 10 seconds on your device.

Press the power button again to turn on the device.

Let the device reboot completely to enter WinRe.

2. From the selection options, click Troubleshoot.

3. Select Advanced Options, and then select Auto-Repair.

Please click Enter a description.

This is caused by the fact that the computer does not shut down properly since the last time you used it.

Put the installation disc into the optical drive, select "Disc First Boot", and then when the white text on a blue background appears, there is a line of prompt below: F3 Repair. At this time, press the F3 key to repair, and you can enter the system normally after the repair.

What brand of computer?

Questions. Association.

Please try the following methods:1. Enter Windows RE recovery mode. If you boot three times abnormally, you can enter Windows RE recovery mode.

Here's how: Press and hold the power button for 10 seconds to turn off the device. Press the power button again to turn on the device.

As soon as you see Windows boot (the ASUS logo appears when it restarts), immediately press and hold the power button for 10 seconds to turn off the device. Press the power button again to turn on the device. While Windows restarts, press and hold the power button for 10 seconds on your device.

Press the power button again to turn on the device. Let the device reboot completely to enter the From the selection option, tap on Troubleshoot. 3. Select Advanced Options, and then select Auto-Repair.

Questions. Auto-repair doesn't work.

Have you already used Auto-Repair?

So, restart the computer first to see if it can boot normally.

It may be that your computer has been upgrading to win11 recently, which causes your computer to not boot normally due to the upgrade.

Questions. You can follow the following methods: 1. Settings - Power - (Shift key click to restart) - Troubleshooting - backup and recovery; 2. The system will automatically check to see if the smart repair option can solve the problem, once it is done click next; 3. You will see that you can select one of the factory image files or other backup files, of course, this place is the factory image file, click Next; 4. The system will prompt you to back up your files, if you need to backup my personal files by selecting the option Yes (make sure you have an external backup hard drive), or select No, Erase My Files, and then click Next; 5. At this point, the recovery step is completed, and the process takes about 10-15 minutes!

Once the recovery is complete, you can restart your computer.

Excuse me, has the problem with the computer been solved?

Hope mine is helpful to you.

Excuse me, do you have any more questions?

If not, please give me a thumbs up

I wish you a happy life and a smooth work!

Questions. No.

Then you wait a minute, I'll check it out.

In your case, the computer driver is missing.

Or call ** to after-sales 3C, he will teach you how to solve the problem of installing the driver.

This is caused by an error in the boot system of the operating system. After restarting the computer, click [F8], select [Last Correct Configuration] in the menu that appears, and press Enter. If there is no problem with the operating system, it can generally be restored to normal.

If F8 doesn't work, the computer still can't access the desktop, so you have to reinstall the operating system.

Maybe something went wrong.,If it's not officially started,You can turn it off again.,Turn it on again to see if there's something wrong when you turned it on just now.,Is there such a situation after rebooting this time?,If not,,I guess there's no problem.。

It is possible that the system lost files due to the last sudden shutdown.

Try the following:

1. Enter Windows RE recovery mode.

If you boot three times abnormally, you can enter Windows RE recovery mode. Here's how:

Press and hold the power button for 10 seconds to turn off the device.

Press the power button again to turn on the device.

As soon as you see Windows boot (the ASUS logo appears when it restarts), immediately press and hold the power button for 10 seconds to turn off the device.

Press the power button again to turn on the device.

While Windows restarts, press and hold the power button for 10 seconds on your device.

Press the power button again to turn on the device.

Let the device reboot completely to enter WinRe.

2. From the selection options, click Troubleshoot.

3. Select Advanced Options, and then select Auto-Repair.

Please click Enter a description.

1. Enter Windows RE recovery mode.

If you boot three times abnormally, you can enter Windows RE recovery mode. Here's how:

Press and hold the power button for 10 seconds to turn off the device.

Press the power button again to turn on the device.

As soon as you see Windows boot (the ASUS logo appears when it restarts), immediately press and hold the power button for 10 seconds to turn off the device.

Press the power button again to turn on the device.

While Windows restarts, press and hold the power button for 10 seconds on your device.

Press the power button again to turn on the device.

Let the device reboot completely to enter WinRe.

2. From the selection options, click Troubleshoot.

3. Select Advanced Options, and then select Auto-Repair.

When this happens, you can restart the computer, and if you can't get the computer into a normal state after repeating it several times, it means that the operating system has crashed. Let's reinstall the operating system.

There are many reasons why the computer boot will show that it does not start normally, first of all, it is better to rule it out, you can pay attention to the official one of the old stickers. The official *** go and pay attention to him, and then ask the customer service.