What should be paid attention to in the decoration of the interior wall and ceiling of the clean roo

1. The surface of the walls and ceilings in the clean room should be flat, smooth, dust-free, avoid glare, facilitate dust removal, and reduce concave and convex surfaces.

2 The skirting foot should not protrude from the wall.

3. The clean room should not use masonry wall plastering wall, when it must be used, it is advisable to use dry operation, and the plastering should meet the requirements of the current national standard "Code for Quality Acceptance of Building Decoration Engineering" GB 50210 medium and senior plastering. After plastering, the wall should be brushed with a paint surface, and a paint that is flame retardant, non-cracking, corrosion-resistant, cleaning-resistant, smooth surface, and not easy to absorb water and deteriorate and mildew should be selected.

1) Paint the wall: smooth, cleanable, and no particulate matter falls off, often used in rooms with clean requirements. During construction, the base layer is required to be dry, otherwise it is easy to explode and peel.

Paint can be used ordinary blending paint, matte paint, etc., in recent years, imitation enamel paint and epoxy resin paint are commonly used (this kind of paint film has good smoothness and high strength, but the construction is more troublesome).

2) terrazzo platform, paint wall: some factories in order to prevent the wall from being damaged, so the use of terrazzo platform, because the vertical surface can not be ground by machine, can only rely on manual grinding, construction trouble, not easy to polish, so the smoothness is not ideal, the biggest advantage of this wall is impact resistance.

3) White tile wall: the wall is smooth, easy to clean, corrosion-resistant, and can be constructed without waiting for the base to dry, but there are many joints. With large tiles, joints can be relatively reduced.

There are many details that need to be paid attention to in clean room decoration.

Questions, whether from the specialized materials or structural design, to the color matching in the room version, etc., need to be treated with caution. The following are the issues that need special attention during the renovation process of the clean room.

1. The building envelope and interior decoration of the clean workshop should be made of materials with good air tightness and small deformation when temperature and humidity change.

2. The surface of the wall in the clean room should be flat, smooth, dust-free, avoid glare, facilitate dust removal, and reduce concave and convex surfaces.

3. The skirting should not protrude from the wall.

4. The clean room should not use masonry wall plastering wall, when it must be used, it should be dry, and the plastering should adopt advanced plastering standards. After plastering, the surface layer of the paint should be brushed, and the paint that is flame retardant, non-cracking, wash-resistant, smooth surface, and not easy to absorb water and deteriorate and mildew should be selected.

5. The floor of the clean room should be flat, wear-resistant, easy to clean, not easy to accumulate static electricity, avoid glare, no cracking, etc.

6. When external windows are set up in clean rooms and personnel purification rooms, double-glazed fixed windows should be used, and they should have good air tightness. It is not advisable to set a window sill on one side of the window in the clean room. The clean room window should be flush with the inner wall, and the window sill should not be provided.

7. The color in the clean room should be elegant and soft.

The decoration level of the clean room is directly related to the efficiency and service life of the clean room, and to a certain extent, it is also an indicator to measure the hard level of the enterprise or hospital.

The materials must be environmentally friendly. The selection of decoration materials must be environmentally friendly, try to choose natural materials, use less composite plates, and pay special attention to the selection of glue, and cannot ignore the details. First of all, there is no pungent smell of environmental protection materials, which will not lead to smelling the smell you don't like to destroy the sleeping atmosphere, and secondly, environmental protection materials are pollution-free and can ensure health, especially in the baby's bedroom, you should pay more attention to the paragraph and, children have low resistance to various pollution, and the polluted environment will seriously affect their health.

The choice of style should be scientific. The bedroom ceiling decoration should first choose the style you like, but the choice of style must be scientific and suitable for the bedroom. The bedroom is a place to rest, and the style chosen should not be too warm, but should be peaceful, and more calming colors such as blue should be used.

And it should be organized, not too cluttered.

The chandelier in the ceiling decoration of the bedroom should not be too ostentatious. Many people who hold socks and stare at beauty like to buy a variety of shiny chandeliers, but the bedroom decoration is not suitable for too dazzling chandeliers, and the lighting should be soft, because too dazzling lights will affect the quality of sleep, and suddenly turning on the lights at night will also damage the eyesight.

Owner:

Go to the decoration site to see, compare the drawings, and understand the construction progress.

Construction party: 1. Construction technology.

2. Construction details.

3. Xige.

1. The ground treatment is self-leveling ground treatment, and the 2mm thick PVC floor is laid.

2. According to the requirements of GMP specifications, the clean room should be considered in the design and installation to avoid the parts that are not easy to clean.

3. All the accessories, partition walls, and ceiling fixing and hanging parts can only be connected to the main structure, and cannot be cross-mixed with equipment and pipeline supports, so as to prevent the loosening of decorative materials and dust falling off due to micro-earthquakes.

4. The gaps between building decoration and doors and windows should be sealed on the front.

5. According to GMP certification inspection standards, interior decoration should meet the following requirements:

a.Materials with good air tightness and low deformation under changes in temperature and humidity should be selected.

b.The surface of the wall and ceiling should be smooth, smooth, ash-free, dust-free, corrosion-resistant, impact-resistant, easy to clean, and reduce concave and convex surfaces. The junction of the wall and the ground is made into a radius equal to 50 mm.

The color of the wall should be harmonious, elegant, and easy to identify contaminants. c.Doors and windows should be straight with the inner wall, and the structure should fully consider the sealing of air and water vapor, so that polluting particles are not easy to penetrate from the outside and prevent condensation due to the temperature difference between indoor and outdoor.

Gaps such as internal doors, internal windows, and partitions between rooms with different levels of cleanliness must be sealed.

6. The amount of dust generated in the construction operation should be controlled during construction, especially the hidden spaces such as the ceiling and the inside of the sandwich wall, which must be cleaned at any time.

7. In the room where the high-efficiency filter has been installed, the decoration operation with dust cannot be carried out.

8. Pay attention to the protection of the completed working surface, and shall not cause the pollution of plate depression, dark crack and surface decoration due to impact, knocking, trampling, and watery operations.

According to the different levels, the purification project includes thousand-level, 10,000-level, thousand-level, 100,000-level, 300,000-level clean workshop, etc. Among them, the smaller the large number, the higher the cleaning regulations, and the 1,000-level purification workshop engineering regulations are the most stringent, which is mainly used in the production and manufacturing of precision processing electronic equipment and the medical and health industry. Attention should be paid to the decoration of the purification workshop:

1. The production of dust-free purification workshop mainly includes air conditioning system, ceiling, ground, partition, and lighting fixtures.

2. Air conditioning system: including air duct, filter system, main engine, FFU, etc.

3. Ceiling: including beams, booms, and ceiling lattice beams, the materials are generally: color steel plate and dust-free board.

4. Flooring: raised floor or anti-static PVC floor or epoxy resin floor.

5. Partition panel: including doors and windows, the material is color steel plate, but there are many kinds of sandwich cores of color steel plate.

6. Lighting equipment: dust-free special lamps and lanterns are used.

7. The material is to purify the wall and roof of the plant, which is generally made of 50mm thick sandwich color steel plate, which is characterized by beautiful appearance, strong rigidity, good thermal insulation performance and easy construction.

8. The ground can be epoxy self-leveling floor or high-grade wear-resistant plastic flooring, and anti-static type can be selected if there are anti-static requirements. The high-efficiency air supply outlet is made of stainless steel frame, which is beautiful and clean, and the perforated mesh plate is made of painted aluminum plate.

9. Although these places do not need to meet the requirements of how many levels of purification and do not need to be very sealed, it is also necessary to consider the selection of unified coatings and building materials when decorating, so as to facilitate cleaning and give customers a clean impression.

Attention should be paid to the following points in the decoration design of the clean laboratory: clean room system, cleanliness and air exchange times, design scheme, materials, pressure and air flow, auxiliary equipment, water supply and drainage, air supply device and power supply, etc.

SICO Purification: Cleanliness Level, Process Design, Process Design.

Cleanroom is an important part of the laboratory, in some occasions where experiments are often carried out, the cleanliness of the environment plays a very key role, even if the slight pollution will lead to deviations in the experimental results, so how to ensure the cleanliness of the laboratory has become very important.

In order to achieve the cleanliness level, the clean room must have comprehensive measures, including process layout, building plan, building structure, building decoration, personnel and material purification, air cleaning measures, maintenance management, etc. Liaoning Hao clean equipment manufacturing, mainly serving the hospital operating room, first room, laboratory department; Pharmaceutical workshop, dust-free electronic food workshop, as well as various laboratory supporting purification products, build one-stop procurement and one-stop service for purification products.

The building envelope and interior decoration of industrial plants should be made of materials with good air tightness and small deformation under changes in temperature and humidity. When the interior decoration of the wall is supplemented with a structural skeleton and insulation layer. Non-combustible or refractory combustible substances should be used.

The surface of the wall and ceiling in the clean room should meet the requirements of flatness, smoothness, no ash, avoiding glare, and convenient dust removal; The concave and convex surfaces should be reduced, and the yin and yang corners should be rounded. Interior decoration should be used for operation; In the case of plastering, advanced plastering standards should be used.