How to choose a sink How to choose a sink

1.The material of the sink: The sink is also called the kitchen basin, and the material should be made of 304 stainless steel, because the carbon content of 304 steel is low, so the flexibility of the steel is better, and the thickness of the sink is general.

2.The production method of the sink: the sink is mainly produced in two ways, one is stamped with water flow at one time, and the other is welded.

3.Presence or absence of a protective coating on the bottom of the sink: A protective coating is added to the bottom of the sink to silence and prevent condensation. The better coating is to spray the reverse side of the sink with mortar, and the ordinary one is to use a rubber gasket to stick to the bottom, which can also have a silent effect.

4.The size of the sink: there is nothing wrong with the length to pay attention to, but the width is very important, the width should refer to the width of the countertop, the standard countertop width is 55cm and 60cm, but everything is special, the countertop of the old house is 50cm.

The width of the sink selected for the 55cm countertop should be within 45cm, and the width of the sink selected for the 60cm countertop can be installed as long as it does not exceed 50cm, but the width of the sink selected for the 50cm countertop is relatively narrow, and the widest width cannot exceed 41cm, which is very important.

5.Installation method of sink: there are two kinds, countertop type and countertop type, so the sink has two kinds of basins: countertop basin and undercounter basin, which are generally made into countertop basin, but in recent years, the undercounter style wind has quietly blown, and the countertop type is more beautiful, giving people a refreshing feeling, and the countertop is easier to take care of.

6.The surface treatment of the sink: After the surface treatment of the sink, the ability to prevent oil stains is greatly enhanced, and the common ones are frosted surface, pearl silver surface, and whirlpool surface, each with its own characteristics.

7.Sink drain fittings: The sink drain pipe should choose PVC water pipe.

In addition, as you said, the price of sinks varies greatly, in fact, in addition to the factors of material and brand, many high-end sinks are because they have a lot of humanized functional design and configuration, such as table control (no wet hands to control the water), draining board, sliding cutting board, etc., making kitchen life more convenient and easier.

So it's better to take a look at the market, learn about it, and then choose according to the actual standard of your own kitchen!

When installing a sink in the kitchen, you need to pay attention to choosing a good brand. So how to buy a sink? PChouse will take you to find out.

1. The size of the sink is determined by the kitchen space.

When purchasing a Wrigley sink, we must choose from the size of the area of the kitchen sink, otherwise it will affect the installation effect of the sink. Generally speaking, the larger the volume of the sink, the higher the volume, but when consumers choose, they can not only pick the big one, but also choose according to the actual size of the kitchen, and choose single, double or multi-basin products.

2. Don't pursue too thick plates.

When buying a sink, we should not only look at the thickness of the sink plate to evaluate the quality, which will affect the quality of our sink. The thickness of the plate, the current market is mostly millimeters, when choosing a stainless steel sink, although the thickness is very important, but can not blindly pursue the thickness of the plate, in general, the millimeter thickness sink plate is enough to use.

3. The depth of the sink depends on the cabinet space.

The height of the kitchen cabinet is directly related to the depth of the sink, so when you buy a sink, you must pay attention to the depth of the sink, and then make a better choice. The depth of the sink is also an important factor related to its slotting, often the deeper the slot, the higher the cost, but consumers should also pay attention to the space of the cabinet when buying.

If you want to ask who is the kitchen c-bit? That sink is definitely well deserved! Although it occupies a small area, it is the only one as long as it involves cleaning work.

Therefore, if the sink is not well chosen, it will seriously affect the comfort of kitchen use, so let's talk about the sink today

First, the type of sink.

There are two main types of sinks:

1. Double slots. There are two types of double-sink sinks:

Double slots of the same size.

The two sinks are similar in size, each about 30-40 cm wide.

One large and one small double slot.

The size of the small groove is about 30cm, and the size of the large groove is about 40-50cm wide.

2. Single slot. Single slot, as the name suggests, is a slot, there is no partition in the middle, and the space is large enough, and there is no problem at all with the usual pots and pans.

Second, the material of the sink.

In addition to the shape and size, the material of the sink is also the focus of purchase, and the common sink materials on the market are as follows.

1. Stainless steel material.

The popularity of stainless steel sink is very high, but there are many types, when purchasing, look for 304 stainless steel, in order to prevent the sink from rusting, in addition, because stainless steel is prone to scratches, you can choose stainless steel with brushed surface process, which can perfectly cover the scratches.

2. Quartz stone material.

Stone sinks are mainly made of quartz stone, and the appearance of quartz stone sinks is relatively high, hard and scratch-resistant, and easy to take care of, but it is slightly expensive.

3. Nano material.

The so-called nano sink is actually attached to the stainless steel sink with a protective nano coating, which has the characteristics of high appearance, anti-oil stain, anti-scratch, etc., but the coating will fall off after a long time.

4. Ceramic material.

Ceramic sinks have a white tank body and a high appearance, but due to the material properties of ceramics, they are relatively fragile and easy to adhere to oil stains.

3. Installation of the sink.

Choose a good sink, you are half of the success, the installation is good, do a good job, one is to choose the location of the sink, the other is the installation of the sink.

1. Selection of sink location.

From the point of view of the use line of the kitchen, it is best to locate the sink between picking up and preparing food, so it is easy to determine the location of the sink.

2. The installation method of the sink.

There are two most common ways to install a sink: countertop basin installation and undercounter basin installation.

Mounted on the bench. Place the sink directly on top of the countertop and seal it with glass glue.

This installation method is to card the sink on the countertop, and the stability is better, but there are sanitary dead corners around the basin, and the glass glue used to fix the basin will be easy to mold after a long time.

Undermounted. The sink is lower than the countertop and is completely recessed under the countertop.

This installation form can avoid a large number of sanitary dead corners above the countertop, and the water on the countertop can also be scraped directly into the sink, which is more convenient. However, due to the specific process required for the installation of undercounter basins, an additional process fee is required.

A well-used sink can make the cleaning work more smooth and efficient, and the first-class sink is also more worry-free and durable, so when you buy a sink, you must choose carefully

Although the sink is only an accessory used in home renovation, it plays a large role, not only to clean food, dishes, but also to soak vegetables. It is used very frequently, and its importance in family life is self-evident.

Common sink materials in the market today include stainless steel sinks that are resistant to scrubbing, artificial crystalline stones that are rich in color and resistant to acid and alkali, Corian and ceramics that have a delicate texture that can be seamlessly connected to the countertop. Each material sink has its own characteristics, and you can choose the material of the sink according to your habits and preferences.

Choosing the right sink is crucial, contact the relevant professionals to choose a water-based macro tank. If you just brush a pot and wash dishes in the sink, I believe that 99% of people will think that a single sink is better. The size of the single sink is large enough that a drain basket and cutting board can be placed on it.

In a simple experience, a single sink almost completely outperforms a double sink. But for the living, the double sink doesn't seem so useless. The benefit of basinning is that the water on the countertop can flow directly into the sink.

1.The advantage of a single tank is that there is more space for operation, so our usual experience will be better. You don't have to worry about splashing water when washing dishes and vegetables, and you don't have to worry about putting bigger pots and pans in.

The advantage of double tanks is that they can be operated in different areas. For example, when washing vegetables and meat, washing vegetables and drying vegetables, it can be divided into two jars, which can improve our cooking and washing efficiency.

2.The biggest advantage of the double water tank is that it can pile up clutter while washing the dishes. For example, some people don't like to wash dishes after eating, so they can be temporarily piled up in the water tank without affecting the normal use of the water tank.

Unlike single and double sinks, liquid silver countertop and undercounter basins are actually two generations of products. The lower basin is an upgrade of the upper basin, which is naturally better than the upper basin. At that time, the countertop material was not good, and the accuracy of the installation tools was not enough, so the countertop basin could only be used.

Generally speaking, we look at our lifestyle habits when we choose. However, I personally think it is better to choose a single sink with a large size. We can achieve zoning operation by installing drainage racks.

Nowadays, many homes install dishwashers, and the sink does not have to play the role of washing dishes. Then we just need to consider our usual experience.

3.Ordinary faucets are prone to splashing when the water is flowing. Such a pull-out faucet can be installed to reduce splashing and make it easier to catch water, wash dishes or wash the sink.

The square mouth is easy to leave a hygienic dead end, it is recommended to choose a round sewer pipe to run the water more smoothly, and the installation location is best selected near the faucet. The above is the answer to the question of how to choose the right sink is the key to choosing the right sink.

When checking the sink, first of all, you must choose a sink suitable for your own home installation, such as single sink, double slot and triple sink, and then you must choose the right material, try to choose aluminum alloy, wide dust change, so that you can have a good resistance to grinding and scratching, and it is very good to clean.

It is necessary to choose a good water-type beam resistant groove, first of all, according to the size of the slag left by yourself, and then choose the sink, the quality of the sink must be very good, and it must be very easy to clean, and it should be suitable.

To choose a sink according to your preferences, but also to the size of the kitchen, you can choose a double cistern.

1. Choose according to the kitchen space.

At present, there are two main types of sinks on the market: single tank and double tank. Generally speaking, a single-sink sink is more suitable for kitchens with less space, which can meet the user's basic cleaning functions. Double-sink sinks are also widely used in the home to meet the needs of separating cleaning and conditioning, and are also preferred because they occupy the right space.

At the same time, there are three troughs or troughs because of the special-shaped design, more suitable for large kitchens with individual styles, it has a number of functions such as soaking or washing and storage, and can also separate food raw and cooked, saving time and effort.

2. Choose according to the size of the sink.

The standard sink size design is generally around 500px in depth, so that the dishes are more convenient to wash, and can prevent splashing, and the vertical angle of the basin wall is 90 degrees to increase the usable area of the sink. If the drain hole is in the ** position of the sink, the cabinet space will be reduced, so the drain hole is back, and the water pipe is better installed against the wall, which not only runs the water quickly, but also makes effective use of space.

3. Choose according to the sink accessories.

The sink hose of the plastic pipe is not resistant to hot water, is easy to age, and the connection is easy to fall off and leak. It is best to choose a sewer pipe made of PP material, which has a high degree of sealing and can also prevent water leakage. In the position of the sewer, there needs to be steel ball positioning, extrusion sealing, steel ball positioning is the key to the sewage discharge of the sink, positioning, can quickly remove sewage.

4. Choose according to thickness, thinness, weight and depth.

The thickness of the steel plate of the stainless steel sink is best selected between, within this thickness, 304 stainless steel is selected, so that the sink has toughness, and can avoid damage caused by impact of all kinds of porcelain vessels to the greatest extent. The easiest way to do this is to press the surface of the sink a little harder, if you can press it down, it means that the material is very thin. The lightweight, thin edges not only unify the maximum washing space and the smallest appearance of the sink, but also the water that splashes out of the sink can be easily wiped into the sink.

Stainless steel is a ferroalloy, and the specific gravity of steel is that nickel and chromium heavy metals are added to it, and the specific gravity of these metals is larger than that of steel, so the weight is relatively heavy. Counterfeit inferior stainless steel, such as steel plate chrome plating has a lighter weight. The height of the sink suitable for domestic use is more than 180mm, and its advantages are large capacity and splash resistance.

5. Select according to the process.

The process of stainless steel sink has welding method and integrated molding method. The welding method is divided into two kinds from the way, one is the surrounding welding of the basin and the panel welded together, its advantage is that the appearance is beautiful, the weld is not easy to find after strict treatment, the surface of the sink is straight and smooth, and the disadvantage is that some consumers doubt its firmness. In fact, the current welding technology mainly includes sub-arc welding and the most advanced CNC resistance welding, and the quality has passed; The other is the butt welding of two single basins butt welded into one, which has the advantage of being stretched and formed as a whole of the basin and the panel, which is strong and durable, and its disadvantage is that it is easy to see the welding traces and the flatness is slightly poor.

Size: When the size of the kitchen cabinet countertop is small, and when there are many family members, you can consider a large single sink, which will be more convenient for the cleaning of multiple tableware and drinking utensils pots, and can be put into cleaning at one time, with large reserves.

Stainless steel sink.

Material: If the sink is used in the kitchen, it is best to choose stainless steel, and it is 304 stainless steel, 201 stainless steel will be more prone to rust, and 304 is more rust-resistant, corrosion-resistant, high-temperature resistant, and not easy to deform.

Thickness: Most of the thickness of stretched stainless steel sinks is around. Handmade pots in between. And the best size of stainless steel sink is between. Therefore, compared with the two, the natural handmade sink ** will be higher.

Stainless steel sink.

Process: There are two production processes for stainless steel sinks, one is the stretched stainless steel sink, the other is the manual stainless steel sink, the stretched stainless steel sink is the use of stamping equipment and molds for stamping and forming, and the production process loss is less than the manual sink, the stability is higher, the cost is relatively low, and it can be produced in large quantities. Whereas, handmade sinks are artificially made, so handmade water costs more.

Stainless steel sink.