The E disk cannot be opened, and the prompt should be formatted

Let's take a look at your E disk attributes, whether it is RAW, whether you have completed it to 100% when you are in the grid, this situation will also occur if the hard disk is not fully formatted, it will be copied with DOS if it can be opened with DOS, if it cannot be opened with DOS, go to ** an easyrecovery pro first format all the E disks, and then use easyrecovery pro to recover, not necessarily 100% recovered, but can be retrieved to the maximum extent, It's best to use it if you're sure that nothing else can be turned on, and hopefully you'll succeed.

Problems with aging hard drives.

The easiest way is to go to a computer repairer and ask them to help you recover your data, and if possible, try to replace a hard drive later, because the problem caused by aging is not only this. Under normal circumstances, the cost of recovering hard disk data is about 100 yuan, which is not too expensive.

It's okay to check, go to the next EasyRecovery Pro online

Just recover the data again. You can also use this software directly to check your e-disk. See if you can get the data back. This software won't destroy your e-drive. You can put the recovered data in the D drive.

Magic Partition can be used with this.

Teach you a good way to open the hidden file first, which is the tool, file options, view, show hidden file extension, and then create a new text document on the desktop, the format behind it is txt, and then open it, enter start e: and then save it, and finally change that txt to bat double-click to run to open the e disk, and delete the auto virus inside after entering.

Check the internet for partition recovery software to try.

I don't know if the recover command of dos can be not.

Dude, there's no way around it, it's just formatting.

I'll give it to me.

raw？If yes, give it to me.

Summary. After the format of the E disk, the file is back, hello dear, it is a problem with the partition table of your hard disk, and in rare cases, it is a problem with the hard disk itself, and then enter the system after the problem is formatted, and other disks must not be formatted, no matter how you format it, the data in it will exist. We need to know that in the general computer system, the formatting instruction is actually just a marker point in the section of the disk, not really overwriting the data of the disk, and the old data will be overwritten when there is really new data that needs to be stored in the space of the old data, so the general formatting is actually unable to delete the data in the hard disk, except for low-level formatting.

The solution to the problem is actually very simple, you want to reinstall the system and format the hard disk, there are two options, the first way is to do a one-click recovery system on the original hard disk, so that the speed is the fastest, but the premise is that you have a backup program to restore the system in other partitions, and the partition table of the hard disk also needs to be normal, otherwise the recovery program is divided and does not know the situation, the system is restored to half of the program is broken, then the original system in the hard disk will be all scrapped.

The files are back after the E drive is formatted.

After the format of the E disk, the file is back, hello dear, it is a problem with the partition table of your hard disk, and in rare cases, it is a problem with the hard disk itself, and then enter the system after the problem is formatted, and other disks must not be formatted, no matter how you format it, the data in it will exist. We need to know that in the general computer system, the formatting instruction is actually just a marker point in the section of the disk, not really overwriting the data of the disk, and the old data will be overwritten when there is really new data that needs to be stored in the space of the old data, so the general formatting is actually unable to delete the data in the hard disk, except for low-level formatting. The solution to the problem is actually very simple, you want to reinstall the system and format the hard disk, there are two options, the first way is to do a one-click recovery system on the original hard disk, so that the speed is the fastest, but the premise is that you have a backup program to restore the system in other partitions, and the partition table of the hard disk also needs to be normal, otherwise the recovery program is divided and does not know the situation, the system is restored to half of the program is broken, then the original system in the hard disk will be all scrapped.

The second way is to find an external device to start the computer, jump away from the computer's own original hard disk, we can choose a disc or U disk to start the computer, and then you can reinstall the original hard disk system through those boot disks, this method is more thorough and is also used by many friends, but for the first method is a bit complicated, the disc we need to make a bootable CD, the system must also be accompanied by a recovery system, when installing we first choose a one-click partition, Partition the hard disk from scratch and then install the system, which will completely solve the partition table and data fragmentation of the hard disk.

If there is nothing important on the E drive, format it, and if there is important data, retrieve the data first, and then format it.

If there is an error in the disk partition table, format the E disk with diskgen and restore the files. Do not write any data to the drive before the restoration is complete.

I've encountered it, and it's generally not good to get it back after formatting.

If there is a problem with a disk, it will prompt "Format" when you click it.

1. First of all, use partition + data recovery software: diskgenius to extract data.

2. Or back up this disk under DOS.

3. After backing up the data, use the partition tool to reformat the disk.

Then format, to give you a trick, you open the control panel.

Management tools. Computer management.

Disk management. Just turn it on and right-click on the disk to format it.

The format is displayed raw, which is the format that is not recognized, in fact, the file system is corrupted, and the file system boot area can be repaired.

Use winrar to open it and take things away, or use the cmd command to change it directly to nets.

Start - Run - cmd - chkdsk d: f - enter "Note that the "d" represents the drive letter that cannot be opened, for example, if you can't open the f drive, run chkdsk f: f and then press Enter, and then restart the computer.

1.Turn on the computer, press F8, after entering the safe mode, click "My Computer", select "Tools" in the top column, select "Folder Options", click "View", select the option of "Hide Files and Folders" as "Show all files and folders", and remove the tick in the box in front of "Hide Protected OS Files (Recommended)" above, if prompted, please click "OK", and then click "OK";

2.Then right-click and select "My Computer" on the desktop, select "Explorer", and then click on the left side of the explorer DriveLetter, the right side will display all the files in the root directory of the disk, check all the files under the root directory of the disk, find this file, and delete; After the deletion of all disks is complete, you must restart the computer for it to take effect.

Open My Computer Tools Folder Options File Type, find "Drive" or "Folder" (choose which one according to the problem you are experiencing, if it is a double-click that can't open the drive, then select "Drive", and if you can't open the folder, select "Folder"). Click "Advanced" below, "New" in the "File Type" dialog box, and fill in "open" in the operation (this can be filled in at will, if there is "open" and pointing to other unfamiliar ones.) The exe file may point to a Trojan, then select "") to fill in the application used to perform the operation, OK.

Then return to the File Type window, select Open, set it as the default, and OK. Now open the partition or folder again to see if it has returned to normal.

Obviously the partition table of your hard drive is missing! Hurry up and recover other partitions with data recovery software! They can read the partition table of the hard drive backup! Most of them can get back the files, and there is also the aging of the hard disk! Power it back on and it might turn it on!

Summary. Hello dear! On the question of whether the computer can run normally after formatting the e-drive, dear.

The answer is yes. Dear, formatting the E disk is equivalent to a comprehensive erasure and reset of the disk. Kiss, which will wipe out all data and the operating system on that disk.

If your operating system is installed on the E drive, then formatting the E drive will cause the computer to not work properly because the operating system has been erased.

Hello dear! Ask about whether the e-disk computer can run normally after formatting, dear. The answer is yes.

Formatting the E disk is equivalent to a comprehensive erasure and reset of the disk. Kiss, which will wipe out all data and the operating system on that disk. If your operating system is installed on the drive, formatting the drive will cause the computer to not function properly because the operating system has been erased.

However, if your operating system is installed on other disks (such as C drive), and the E drive is only used for data storage or other purposes, then formatting the E disk will not affect the normal operation of the computer. The computer can still work with the operating system and software on other disks.

Tips: Dear, no matter how much you format your data, make sure to back up your important data. Dear, because formatting will erase all data, if you don't have a backup, the data will not be able to be restored, dear, formatting the e-disk computer may affect its normal operation, depending on the operating system installation location and the role of the e-disk. Please back up important data before formatting to avoid loss.

Hello dear! Formatting the e-disk computer can still run normally. Formatting the e-disk computer can still run normally.

Formatting an e-drive computer means to erase all data in the e-drive and re-establish the file system. After formatting the E-drive, the files originally stored in the E-drive will be deleted and cannot be recovered. However, formatting the e-drive will not affect the data on the operating system and other hard drives, so the computer will still work normally.

Before formatting the e-drive, it is recommended to back up important data to prevent data loss caused by mis-operation of the book. Also, the formatting process may take a while, depending on the capacity of the E drive. During the formatting process, your computer may become slower, but once the formatting is complete, your computer will resume normal operation.

It should be noted that formatting the E-drive will erase all state guess data, including operating system installation files, etc. If there are installation files of the operating system or important programs on the e-disk, these files cannot be used directly after formatting. In this case, the operating system or program needs to be reinstalled.

Finally, before formatting the e-disk, please make sure that you have understood and understood the consequences of formatting, and make a decision according to your needs and situation. If you are unsure, you can seek help from a professional.