What is the reason why the DJI T20 water tank does not show capacity?

The remaining dose is not displayed on the remote control.

You can try it first, reinstall the level gauge to see if it is abnormal, if it is still abnormal, you can take a screenshot and contact us in time in the future.

Dajiang T20 water tank does not display capacity, it should be you to display the screen to set the display, set to not show it has a variety of display modes, you can adjust.

DJI T20 tank not showing capacity what is the reason I think the university will make its 20 tank not showing capacity is that they um, there is already a scale.

I think that in general, the main reason why the refrigerator does not show its capacity is because it has a relatively large capacity.

The main reason why the capacity is not displayed is because it itself does not have a scale, and you can only add a little water to it by feeling.

What is the reason why the 20 water tank does not show capacity? Everyone posted 20 to tell you that it is a 20-ton water tank, and the capacity has been reported.

In this case, it is likely that the display panel is faulty, and in this case, it cannot be ruled out that the computer board is faulty.

The river tank does not display the capacity, which should be added as an option from the system settings, so that the relevant display needs can be completed.

This model of the tank does not display the capacity of the upgraded version, it will display the capacity.

This may be that you are not buying a smart one, only a smart model will display the capacity.

2.Add appropriate water to the medicine box, press and hold the spray button in the upper left corner of the remote control for 2s, and the system will automatically discharge the air in the pipeline;

3.Click the icon in the upper right corner of the execution task page to enter.

The battery bearing of T20 is larger than that of T16, the weight is also 50G heavier, the battery capacity is increased, from the original 17500mAh to 18000mAh, the release rate is increased from 7C to 9C, the number of cycles reaches 600 times, high temperature resistance, no need for water cooling. XAG's water-cooled battery, although the idea is good, but in some forums, I saw that the water-cooled battery has a clear attitude towards water warranty.

The other 20 radars are the first omnidirectional radars, which are the first in plant protection UAVs, and the pressure relief valve is changed to automatic, which does not require manual pressure relief, which greatly reduces the time wasted by emptying.

A lot of times it's normal if it's not displayed, and sometimes it's not that smart.

If the water tank does not show capacity, it may be that the parts on the water tank are damaged, and it is recommended to repair it.

If he doesn't show capacity, it might be him. There was a problem with the net weight.

If the tank does not show capacity, it should actually be marked somewhere on the device.

There are many reasons why the Dajiang T20 tank does not show capacity.

If he doesn't show the capacity, it's good to be a person in terms of settings and reset it.

This is the air incoming from the spraying system. Air enters the pipe and can be discharged by opening the pressure relief valve or solenoid valve. If there is frequent air intake, it is usually that the air tightness of the spraying system is abnormal, and it can be checked according to the following beam height rules

1. Clean the filter at the bottom of the medicine box.

2. Open the spraying to detect whether there is bubble flow or dripping in the pipeline between the water pump and the water tank, if so, please re-tighten the black nuts at the connections of the pipeline, and replace the cracked and leaking pipes and pumps.

3. Detect whether the pipe nuts at both ends of the flowmeter are loose, you can loosen the nuts, reconnect the pipes firmly after removing them, and then tighten the nuts.

4. The installation of the medicine box is to pour some water into the lotus seat, and after installing the medicine box, slightly press the rubber shed of the medicine box, which can improve the air tightness of the contact between the medicine box and the lotus seat.

5. Put the one-way valve of the water outlet of the medicine box.

The black rubber ring is installed in the same direction as the top and bottom, or the check valve is replaced.

The above methods are still ineffective after investigation, and it is recommended to contact the best business to assist in testing, focusing on replacing and detecting whether the pump and lotus seat are faulty

DJI T20 plant protection drone

The T20 is equipped with a reliable omnidirectional digital radar that continues the excellent performance of DJI drone drones and helps plant protection operations be completed efficiently.

The T20 adopts an eight-nozzle design, a 6L min high-flow water pump, and a deeply optimized wind farm design to make the fog droplets uniform and fine, easily covering both sides of crop blades. Newly developed four-channel electromagnetic flowmeter.

The T20's four liquid lines can be independently controlled, so that the spraying effect of each nozzle is more similar and the overall spraying is more uniform.

1. Check whether there is gas residue in the pipeline, and turn on the spraying function to discharge the gas;

2. During the flight, click on the Tipunsen display in the upper left corner to check whether it is caused by hardware problems;

Hold your breath, unscrew the nozzle or air release valve to release the gas, check whether the lower gasket is aging, and you can add an extra pad to relieve it.

T30 to change the water pump unloaded and then the oil seal and water seal and check the check valve to replace the problem of no problem, at the same time can also solve the problem of high noise and trembling of the pump sales, water seal model oil seal 12-20-5, or search for T30 pump maintenance kit on **, check valve is not recommended to change, because the check valve is not easy to have problems, water seal and oil seal should be replaced once in a few months, this is a wearing part.

The DJI T20 trapezoidal current is too large, mainly due to the high current voltage.

There are two possibilities for not showing capacity.

First, if you are using a new hard disk, you must format it when you install it in the recorder for the first time, otherwise you will not recognize the hard disk and will not display the capacity.

If it's not a new hard drive and the capacity is not displayed, first check whether the data cable or power cable is connected correctly, and then reformat it.

If the capacity is not displayed, it means that there is a problem with the hard disk, or the machine cannot read it.

Now that the nuclear stupid general is giving him 20 of his water laughing spring pump, we still need to readjust the use, and it may be because of your setup problems.

Most of the reasons for the damage of this flow meter are due to the inaccurate installation position or the insecure installation process.

Since there is a separate electromagnetic flowmeter, please check the flowmeter wiring and calibrate the flowmeter and water pump; If multiple calibrations fail, check if the air is empty, replace the flow meter and check the spray plate;

Yes, if the battery is invalid, you can change the board, but in addition to not displaying the power, you can still use it.

You're not using the original battery, that's all.

Try restoring to factory condition.