What should I do if there is a plug in error in my Sony T 20 digital camera?

1.**The format and size are confirmed to be the same as those supported by the camera, which rarely causes the same two problems as you mention, and the following two are more prone to such failures.

2.The memory card is not formatted properly resulting in **corruption.

3.It may be that the contacts in the memory card slot are oxidized, resulting in card reading errors, and the result is that it cannot be stored completely when it is saved, and I have repaired this fault of many Samsung.

4.You can enter the factory mode to test the specific fault (it is difficult to operate for non-professionals).

You put the superfilm in the directory of the camera itself, as long as the ** is not modified, that is, you have turned the direction of the **, so in the computer to turn the ** to normal on the line.

Picture Motion Browser, or PMB for short, is a batch transfer, and if you have or changed the **, you will get a similar error in the postback.

It is recommended to copy the ** in the machine to the computer, to select the desired ** to classify or delete, the same is true for the in-camera**, select the required ** to classify or delete, and do not change or **attribute the photo in the camera, otherwise, there will be a similar error.

Did you use a memory stick to assemble it?

If it is original, the photo is very important, and you can find customer service to repair the data.

The fake's can only be left to his mistakes.

There are several reasons why the problem occurred:

1.File corruption (non-Sony memory stick is prone to appear).

The memory card should be formatted in the camera, I suggest you can contact the dealer of the MS memory card, generally speaking, it should be the problem of the card, it is recommended that you try to change the memory card should be normal, when using the memory card, be sure to format the memory card in the camera regularly.

If a digital camera has a "format error" error message, it may be due to the following reasons:

1. The memory card body is damaged. 2. The file format of the memory card is corrupted. 3. The digital camera card slot is faulty......Either the card slot itself is broken, or the contacts in the card slot are not in good contact. 4. The card reading module (card slot, electrical circuit) of the digital camera is faulty.

The specific method of investigation can be carried out by the following steps: change to a new memory card and test ......If possible, install the memory card with the error on another camera and try ...... againThis will determine if there is a problem with the memory card. If the card is normal after the card is replaced, and the original memory card is installed on another digital camera and the error is reported, then it can be determined that the memory card is broken......Changing the card will solve the problem......If you can't solve the problem no matter how you change the card, it's a problem with the camera card slot......If there is a problem with the card slot, or the related line, ordinary users cannot repair the ......The camera needs to be taken to the official after-sales inspection and maintenance.

Take out the battery or take out the memory card, and then re-enter, you really can't format it with a computer!

Sony's digital camera has E62:20, which is a hardware failure of the anti-shaker, and you need to contact the after-sales service for disassembly detection;

The first to introduce the concept of image stabilization was Nikon Corporation of Japan, which introduced a pocket camera with vibration reduction (VR) technology in 1994.

The following year, Japan's Canon launched the world's first lens with an image stabilizer, the EOS 75 300mm F4 IS, where IS is the abbreviation of Image Stabilization System, which is customarily referred to as the "image stabilization system".

There are three main types of image stabilization: optical image stabilization, electronic image stabilization, and photoreceptor protection (CCD).

The common problem of Sony's T series, if you don't use it often, this kind of problem will not occur, you may use it more frequently This kind of problem is a product quality problem, you can check whether it is still under warranty, if it is free during the warranty period If it exceeds the warranty overalls, the maintenance cost of the camera is relatively expensive, around 500 yuan

T20 This kind of problem belongs to the product quality problem, you can check whether it is still in the warranty period, if it is free during the warranty period!

You get the alternate buttons of the viewfinder and the display wrong, you try to press the shutter a few times in photo mode, see if there is an image or the battery is broken, buy a new one.

See if that's the case.

First of all, make sure whether the card is reversed, if not, you find another SD card to try, or not, you have to consider the problem of your camera itself, what I am talking about is the problem of your memory card slot, whether you have inserted the card when it is reversed, and your contact points are broken, so when you insert the card, it will report an error. If you haven't plugged it inverted, then you go to another W630 machine to try, if it can be used, it means that there is a problem with your machine slot, if you can, find a new one with a merchant, if not, go to the after-sales service to help you deal with it. Hope it helps!

The card is new and not necessarily without problems. You can check it with Frombyte Recovery for DV.

Is there a problem with the card, you can consult with a professional organization, the technology of North Asia data recovery is first-class, you can consult with them.

There are several reasons for this problem, 1. The lens is wrongly stuck, resulting in the self-test of the boot lens, but then the error is reported 2, the lens driving gear is broken, and the lens cannot be driven and the error is reported 3, and the lens driving circuit is broken, resulting in an error without driving voltage and driving signal.

The solution is as follows:

1. Check the battery first for signs of oxidation, if so, wipe it with a cotton swab, and wipe the battery contacts of the fuselage, if there is a knife.

2. If it still can't be solved, please find Sony after-sales service for maintenance.

Hello Answer! There are several reasons for this problem, 1. The lens is wrongly stuck, resulting in a self-test of the boot lens, but then an error is reported 2. The lens drive gear is broken, resulting in the lens cannot be driven and the error is reported 3, the lens driving circuit is broken, resulting in no driving voltage and driving signal and the error solution is as follows: 1. Check whether the battery has traces of oxidation, if so, wipe it with a cotton swab, and wipe the battery contacts of the fuselage, if there is a knife to scrape it 2, if it still can't be solved, please find Sony after-sales service for maintenance. Thank you!

Ask a question: Turn off the power and turn it back on.

What is the reason.

What is the reason.