Is it possible to install one ADSL at home and use two computers to access the Internet?

It can be shared, and there are three ways:

First, you buy a router, generally about 100 yuan, and then you can use two machines to access the Internet, and a few more can also access the Internet, when you buy a small one, the home router will become!

Second, you buy a switch, which is also small, and Chinese can be pronounced as "Habo", which can also solve this problem.

Third, you give your old desktop another network card, and then a network card on the external network, a network card and your laptop connected to an intranet, share the Internet.

How much was the monthly subscription fee before, and now it is still how much, unchanged!

Yes

Just buy a router and the manual will teach you how to install it when you buy it.

How to set it up.

Buy a router and you can share the Internet.

It's okay to buy a router, a few dozen dollars.

Add a router, it's only 90 yuan to buy a TP-link400 router!

You can first see if your adsl has its own route, if not, you can buy a route yourself.

Of course, different communication companies take different lines, as long as you pay money, even if you pay the same house, you can install several, even if you are the same family, you can also install several, there is no limit.

Application method: 1: Call the customer service of China Telecom, China Unicom, China Mobile, and three communication companies.

2. Transfer to manual service.

Four: Call the business hall for specific information.

Five: Take your ID card to the business hall to report the installation.

There is an exception, if you live in a new building, do a good job of internal line, if the internal line can only be connected to one broadband, then it will not be able to pull in, if not this kind of building, there is no problem. )

Before you go, remember, thank you!

This does not require a computer to install dual network cards, as long as both computers have network cards. What you need to do is to connect the network cards of the two computers with a network cable, as for the settings, it is more troublesome, it is best that the system versions of the two computers are the same, otherwise sometimes there will be some inexplicable situations.

Comparison of the two:

First: through the router, as long as the router is powered on, other computers can access the Internet as long as they are turned on, no need to dial up, and no need for a host or anything.

Second: If you don't use a router, you need to turn on the computer connected to the external network, and the other computer can access the Internet. And in terms of network speed, the two computers will affect each other, which is very unstable.

It is recommended that you choose a router, after all, it will be more convenient to use this way, and it will reduce a lot of unnecessary trouble. In the past, it was because the router was high, and now the home router costs dozens of dollars, so it's better to choose the router.

The current PPPOP dial-up method can no longer use shared Internet access, and shared Internet access requires a computer as a server, which must be turned on all the time. If computer No. 1 is used as a server, then computer No. 2 must also be turned on if computer No. 2 is to access the Internet.

It's better to buy a router, 50 yuan. It's much more convenient.

This is okay, but the configuration of the dual network card machine must be high, and the server version of the system must be installed, the dual network card machine is set as a server, and then another access server can be released, the access rights are completely released, if necessary, turn off the firewall, pay attention to set to a fixed IP.

Connect the two hosts with a cross-connected network cable with the same IP address. *, Dual network card machine sub-set connection sharing! You can access the Internet at the same time.

It is best to use routing, and 2 units are turned on at the same time when you don't need to go online! Save electricity bills, it is recommended to buy wireless routing! Remaining wiring.

In this way, you can access the Internet from the machine, and the host has to go to the router first, which is very free.

The setting depends on whether your network card is 1000m or 100m network cable.

It's cumbersome or the router is convenient.

Of course, it's a router.! A network card is connected to ADSL. . . And ask to be able to access the Internet normally!

The second line should be made into a cross line and connected to the other one! Then set up the connection to the Internet to allow other users to share some connections to the intnet... ok！！

It's a lot of trouble to buy a router, so it's a lot of trouble to have dual network cards, and you have to keep the other one open to access the Internet.

Connect the WAN port of one of the wireless routers to the LAN port of the other wireless router with a network cable.

Ways to install two wireless routers with one broadband account:

All but the first router need to disable their DHCP function.

Similarly, connect the second router with a network cable and log in to the background management interface of the second router. If its IP is.

Open the browser, enter the background management IP", and then press the enter key.

After entering the administrator account and password, click OK to open the background management interface.

Enter in the figure below"Network parameters"Modify the LAN settings, set the IP address to, save, and restart the router to log in again"。

On the left, select DHCP Server, and then select DHCP Service

Set the DHCP server on the right to "Disable".

Once you're done, restart your router.

Dear, hello, I will help you answer this question, I am answering it for you, please wait a while, don't be too anxious, I hope my answer can help you, solve your troubles, I wish you a happy life and good health.

Hello, there are two wireless routers that can be installed at home.

Wireless routers and wireless routers can be connected via a wired connection or a wireless bridge; Wired connection: The LAN port of the wireless router pulls a network cable over and connects to the WAN port of your secondary wireless router. Before connecting your home wireless router; You first go to the network parameter settings of the secondary wireless router, the LAN port settings, and modify the IP address

It's easy to say; The first wireless router fixed channel number; a second unlimited router; In the network parameter settings, the LAN port is set to; Reboot into the second wireless router; Wireless Settings Wireless basic settings, set the same SSID number and channel as the main router, check Turn on WDS, and click Scan; At the same time, the second wireless router turns off DHCP; Change Start to Not Star.

Yes, but you need to connect the routers in series, and then change all the WAN port settings to automatic acquisition in the lowest-level router, so that the first-level router will automatically assign IP, gateway and DNS to the lower-level router.

Hello. Yes, you only need to connect the wireless router to the Broadband Cat, and then go to the router settings page to set it up.

Yes, just change the IP address of the secondary router.

OK! Come to the port yourself! As many ports as there are.

Yes, it doesn't matter how many units you install.

Yes, you can press as much as you want.

Expansion: 1. The upgrade of the network also puts forward the demand for the network port of the motherboard, and the simple 100 Gigabit network port is no longer attractive, and the improvement of the number is also very important while improving the performance. As a result, motherboards with dual network ports have become more common.

2. The dual-network port motherboard is not of much use for ordinary users to surf the Internet, but it is completely necessary if the user wants to build a server. You can use one of the network ports to connect to the external network, and the other network port to connect to the switch or internal network. Finally, by bridging the two NICs, you can build a simple home-grade server.

3. In addition, there are some alternative application methods for dual network ports. For example, if there is no router, two computers can access the Internet at the same time through dual network ports, or transmit data through network ports.

4. All in all, the biggest advantage of dual network ports is that you can use the other network port to do some extra things without destroying the local network. Now the cost of dual network ports is not high, and if conditions permit, choosing dual network ports will bring different surprises.

Yes, you can configure a desktop computer with dual network cards.

Yes, add an external network card and you're OK! One goes to the inner net and the other goes to the outer net is put.