Is there a warranty for water ingress into the IP54 waterproof phone?

It depends. The probability of warranty is not high.

IP54 contains two tests, one for dust resistance and one for water resistance.

IP5X is a dustproof test: placed in a dust box, open the lid to check that there is no dust inside the product, and if it does not affect the performance of the product, it can also determine the load standard requirements.

IPX4 is waterproof test: liquid splashed into the casing from any direction has no harmful effect.

The protection level is mostly expressed by two numbers followed by IP, and the number is used to clarify the level of protection.

The first digit indicates the range of resistance to fine dust in the device, or how well people are protected from hazards in a sealed environment. Represents the level of protection against the ingress of solid foreign matter, the highest level is 6;

The second digit indicates how waterproof the device is. Represents the level of protection against water ingression, and the highest level is 8.

Dust resistance rating (indicated by the first x).

0: No protection.

1: Prevent the intrusion of large solids.

2: Prevents the ingress of medium-sized solids.

3: Prevent small solids from entering and intruding.

4: Prevent the entry of solids larger than 1mm.

5: Prevent harmful dust accumulation.

6: Completely prevent dust from entering.

Waterproof rating (indicated by the second x).

0: No protection.

1: Water droplets dripping into the shell have no effect.

2: When the shell is tilted to 15 degrees, the water droplets dripping into the shell have no effect.

3: No effect of water or rain from 60 degree corners to the enclosure.

4: Liquid splashed into the shell from any direction has no harmful effect.

5: Rinse with water without any harm.

6: Can be used in the environment in the cabin.

7: It can withstand water immersion (1m) in a short time

8: Immersion in water for a long time under a certain pressure.

The reason for the water ingress of the mobile phone is because it exceeds the waterproof level, which is not guaranteed, and the so-called warranty is because its own quality is not man-made damage. If it is damaged due to exceeding the waterproof level, it is not a quality problem and will not be warranted.

IP64 means that the product protects against the ingress of solid foreign objects larger than the diameter and against the ingress of splashed water.

The IP protection level is composed of two numbers, the first number indicates the level of dust proof and prevention of foreign object intrusion of the electrical appliance (the foreign objects referred to here include tools, and human fingers should not touch the live part of the electrical appliance to avoid electric shock), and the second number indicates the degree of airtightness of the electrical appliance against moisture and waterproof infiltration.

The IP protection level is followed by a number, with the higher the number indicating the higher the protection level.

Extended Information: Water Resistance Rating for the 2nd Digit after IP:

0 means no protection, no special protection against water or moisture;

1. It means to prevent water droplets from soaking in, and the water droplets falling vertically (such as condensate) will not cause damage to electrical appliances;

2 indicates that when the inclination is 15 degrees, it can still prevent water droplets from soaking. When the electrical appliance is tilted vertically to 15 degrees, dripping water will not cause damage to the electrical appliance;

3. It means to prevent the sprayed water from soaking into the rain or preventing the sprayed water from invading the electrical appliances and causing damage in the direction of the direction with a vertical angle less than 60 degrees;

4. It means to prevent the splashing water from soaking in, and prevent the splashed water from all directions from invading the electrical appliances and causing damage;

The waterproof grade of the building should be determined by the designer in the waterproof design, according to the nature of the building, the degree of importance, the use of functional requirements, etc., to determine the waterproof grade of each part of the building, and then according to the waterproof grade, the waterproof layer service life to select waterproof materials and structure.

With the implementation of the new version of the 2008 "Technical Code for Waterproofing of Underground Engineering" GB50108-2008 and the new version of the "Technical Code for Roofing Engineering" GB50345-2012 in 2012, the waterproof grade of construction engineering is divided into two types: the waterproof grade of underground engineering and the waterproof grade of roofing engineering.

Summary. Is there anything wrong with IP53 waterproof falling into the water, there is nothing wrong with the IP53 waterproof mobile phone falling into the water, because it is waterproof, so it is said that there is no matter, there is nothing at all, because it is waterproof and has a waterproof design, so there is nothing to do when he falls into the water, there is nothing to do, there is no problem, there is no problem, there is no problem, there is no problem at all.

IP53 waterproof fell into the water is there something wrong with the ip53 waterproof mobile phone falling into the water, because it is waterproof, so it is said that there is no matter, it is nothing at all, it is not good to shout Hui You, because it is waterproof, there is a waterproof design, so he fell into the water is nothing, there is nothing at all, there is no problem with it, there is no problem at all.

What to do if your phone falls into the water.

The correct way to do after the mobile phone falls into the water: 1. Salvage Whether the mobile phone is dropped in the basin, in the toilet, by the lake or in the rain, the first step is not to be in a daze, and let the water machine get out of the water source as soon as possible. Because the longer the time in the water, the greater the damage to the mobile phone, such as the motherboard, screen, battery, buttons, etc., just like a person drowning, the sooner you are rescued, the greater the probability of survival.

2. Wipe dry After scooping up from the water, immediately wipe the surface of the mobile phone dry with dry paper towels, rags and even clothes, take out the SIM card slot, and use paper towels to absorb water at each opening of the mobile phone. Remember, don't press the power button and volume key and other buttons, don't turn on, don't turn on, don't turn on, this is the most important point, because once turned on, due to the water in the fuselage, connecting the power again will cause the motherboard to burn out 3, dry Use a hair dryer to turn on hot and cold air alternately, and aim at each opening of the mobile phone, such as charging port, headphone hole, SIM card slot, etc., if it is soaked in water, you need to blow for a while, if it is only partially watered or partially watered, you don't need to blow for too long. The phone can then be placed in a pile of rice or desiccant and taken out after a few hours.

4. After trying to boot the above steps, you can try to boot the phone, if it can be turned on normally, don't be too happy. Check whether the buttons, fingerprint recognition, screen touch, and speaker of the mobile phone are normal, if the use is normal, then you will be happy in vain, because you can't change the phone to a new one; If it doesn't turn on or some of the functions fail, then, congratulations, you still have the opportunity to change to a new phone, and enter the five steps. 5. After-sales maintenance Yes, after the first four steps of Sen Zhuhui are invalid, I have no choice, send it to after-sales.

Ask if you can repair and repair**, if you can repair and **acceptable, you can repair it; If it can't be repaired or ** is too expensive, or you just want to use this as an excuse to change your phone, then buy a new phone, it may be providential. The above is all the content of "What to do if your phone falls into the water and what to do after your phone falls into the water", I hope it will be helpful to you.

IP53 waterproof fell into the water, it's fine. IP53 is a waterproof phone, so it doesn't matter if it gets into the water, but you should take it out as soon as possible.

Mobile phone water treatment method:

1.Shut down in time:

The reason why people are worried about the mobile phone falling into the water is that after the water enters the mobile phone, the main front digging plate of the mobile phone will be burned out, so that there will be various failures and problems. Therefore, at the moment when the mobile phone falls into the water, you must take the mobile phone out of the water as quickly as possible in your life, and then if the mobile phone is still on, you must turn it off immediately, and if you can't turn it off, you can use the forced shutdown method to shut it down.

2.Wipe dry:

After turning off the phone, use a towel or paper towel or other tools that can absorb water to dry the water on the surface of the phone, and as for the headphone jack and charging hole, you can use a small cotton swab to absorb water. Be careful not to shake your phone too hard to remove moisture, and it's best not to use hot air from a hair dryer.

Blowing directly at the mobile phone, the high temperature is easy to damage the internal parts of the mobile phone.

3.Send it for repair:

After a simple "care" of the phone, the fastest and safest way to send it to the repair shop for repair, because the shorter the time of water ingress, the least chance of damage to the phone. Of course, there are many users who are reluctant to pay for this repair, and decide to use it directly after simple treatment, if you are lucky, the water does not enter the phone, but on its surface then there is no problem.

Summary. Hello dear, glad to answer your questions, IP53 waterproof level 3, water or rain falls on the surface of the object from both sides within 60 degrees of the vertical line, it will not cause damage. IP53 waterproof means that all vertical surfaces of the device will not be affected in the rain within 60 degrees.

The device was placed in a water flow environment of 10 l min for 10 min, and the device was not affected. Although the device has some waterproof ability, it is not permanently effective.

Hello dear, glad to answer your questions, IP53 waterproof level 3, water or rain falls on the surface of the object from both sides within 60 degrees of the vertical line, it will not cause damage. IP53 waterproof means that all vertical surfaces of the device will not be affected in the rain within 60 degrees. The device was placed in a water flow environment of 10 l min for 10 min, and the device was not affected.

Although the device has some waterproof ability, it is not permanently effective.

If you drop it in the basin and take it out immediately, will it be a problem?

Dear, IP53 waterproofing will not be a problem if you take it out immediately after falling into the basin, you can rest assured.

Dear, because IP53 waterproof, it will not affect the device to experiment in the environment with a water flow rate of 10L min for 10 minutes, so there will be no problem.