Why does my CAD2006 open shows the font hztxt not found

In the process of converting ACAD drawings, there are often problems such as font mismatch and garbled characters, and the solutions to some of the problems are now shared.

When opening a file with R14 (and above R14) when opening a DWG file with R14 (and above), even if the glyph file is correctly selected, there will still be garbled characters, because R14 (and above R14) and R13 (and below) use different pages. Solution: You can go to the Autodesk homepage **** page conversion tool wnewcp tool to convert, if the original picture is Chinese Simplified, choose to convert to GB2312 or ANSI936.

2.Writing in a block, such as writing in the title bar, some content is too long to cause the text to go out of bounds, in the previous version of ACAD 2000, the text properties in the block cannot be adjusted (that is, the block in the block cannot be adjusted), and the text properties can only be adjusted by exploding. Workaround:

Upgrade to ACAD 2002 to change the properties of the next layer of blocks in its blocks.

3.When a number is mixed with text, the height varies, and the number is usually a little larger than the height of the text. Workaround:

I usually use the style command to specify the number in the gbenor font (ACAD comes with, the character height is shorter than other fonts), and the text uses hztxt font (if there is no hztxt font, you can choose another font instead according to your feeling).

4.When you open a CAD drawing from another company, it prompts that there is no font in the drawing, but after replacing it with another font, garbled characters appear. Workaround:

Create a new document, insert the CAD drawing as a block, and the garbled characters will disappear (but the font will be different from the original drawing, if you want to be 100% accurate, you need the other party to pass the matching font).

5.Use the Chinese version of proe to draw a good drawing, when you convert it to dwg and open it with autocad, no matter how you set the Chinese font in acad, blow it up (because the text is all tiles when the text is converted from proe to dwg), you can't display the Chinese font in proe normally. Workaround:

When converting, do not directly convert to dwg format, first convert to dxf format (so that the Chinese word in ACAD will not become a block), and then use AutoCAD to open this DXF file, at this time the ACAD file font style is pure English characters, use the style command to change the font style, use big font, choose a more suitable Chinese font, and then apply, you will find that the Chinese characters in the proe bid are all restored. After the test of netizens, the font is almost the same as that of proe.

6.The drawings are solid characters, and hollow fonts appear when printing. Solution: Change the value of the ACAD parameter textfill from 0 to 1.

Let's take a look at the fonts in your CAD directory to see if there is no such font If so, are you using Win7? If it's win7, find an XP system machine and test his windows fonts folder to your windows fonts win7 seems to have a few font names changed.。。。

Select in the start dialog box, then click OK, click a few more times, and it can be opened. This is the font replacement feature.

You can search for this font in the system!

1. The following picture is the CAD drawing with the problem, and you can see that the text part has become a garbled number + English + symbol.

Form. <>

2. At this time, find the tool at the top, find the palette, find the feature (p) in the pop-up page on the right, and click it.

3. Select the position of the garbled text, find the style below the text, and write down the name of the style.

4. Make a quick selection. Open the tool to find Quick Selection (K), select the layer, and select the support reinforcement in the value drop-down list.

5. After selecting Chinese characters, select the text in the content of the feature selection closed smile orange necklace.

6. Select the style that starts with tssd in the text style and replace the text. Reopen the software, and you can see that the text can be displayed normally after being replaced.

<>2. Right-click on the CAD software icon on the computer, select "Properties", and click "Open File Location" under the shortcut under the property box to open the CAD Anchun Huai Installation Directory folder;

<><4. Enter the decompression path and extract all the characters into the fonts folder. Qi is missing.

5. Question marks are displayed in files opened before without fonts.

6. After installing the font, it will return to normal.

CAD2021 + Open Drawing + No Font Found prompt appeared.

CAD2021 + Open Drawing + No Font Found Prompt Hello dear, the most common problem about CAD fonts is the missing font, that is, the lack of fonts when opening CAD drawings; However, there are also many problems with the text that does not prompt the missing font when opening the file, such as garbled characters cannot be displayed, etc. In fact, the root cause of this is the lack of the font! But since it's the missing font, why isn't there a hint when you open the drawing?

It is very likely that it is because I randomly found the font installation package and named the font name and then put it in the font installation directory, when the file is opened, the CAD retrieves the font file, so it will no longer prompt the missing font, but because the font is not the original font at all, it causes problems such as garbled text. The fundamental solution to this problem is to find the original font installation package and install it. I hope mine can help you.

If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. Finally, I wish you good health and a good mood!

4. Enter the decompression path and extract all the text into the fonts folder.

5. Question marks are displayed in files opened before without fonts.

6. After installing the font, it will return to normal.

1.Install this font 2If it is still opened, it will be displayed in a different font by default.

If you don't want to post the picture, just look at it yourself, open the CAD font style manager (ST), replace everything you use, save it, and regenerate it (RE).

If you want to post a picture, look for it on the Internet, or find a designer to ask for it, or use the one I uploaded, put it in the cad directory, fonts directory, and restart the CAD.

ps: It is recommended to copy a copy of the CAD font directory and change the name to, so that when you open the CAD and find that there is no font, press enter directly, that is, use the first alternative display, so as to save the font and change it again when you open other files.