Why does my CrossFire always have a blue screen and freeze as soon as I turn it on

Organic blue screen. Solution: Run at a normal frequency first, if there is still a problem. Find a good memory module to replace the fault, which can generally be solved. Then you should pay attention to the heat dissipation of the memory when the CPU is very close to the memory.

2 Poor hardware compatibility caused by blue screen.

The good thing about compatibility is that it is cost-effective, and the bad thing is that when it is assembled, because the user does not have perfect monitoring means and corresponding knowledge, it is impossible to carry out a series of compatibility tests, so as to leave hidden dangers in the future use process.

Example: A fault caused by mixing memory modules of different specifications during memory upgrade.

Solution: Pay attention to the differences between the manufacturer, memory particle and batch number of the memory module, which often produces a blue screen or crash or even a more serious memory failure because of the difference in the main parameters of each memory module. You can also change the position of the slot where the memory module is inserted.

If the memory module still doesn't work, then you have to replace it. Here, I would like to remind you: memory plays a very important role in the entire microcomputer system, and its quality will directly affect the stability of the system, so it is best to pay attention to the purchase of memory, and it is best to be accompanied by an insider, so as to avoid buying remarked strips or strips with too low frequency.

3 "Blue screen" failure caused by hardware heat dissipation.

Example: The failure of the heat dissipation problem of the microcomputer often has a certain pattern, which generally occurs after the microcomputer has been running for a period of time, which is manifested as a blue screen of death or random restart. The main cause of the failure is data reading and transmission errors caused by overheating.

Solution: If you are overclocked, you should reduce the frequency, and if you are overclocked, you should cool down. In fact, not all faults are so complicated, sometimes from the simple side, you can also solve the problem well to learn to bypass.

4 Blue screen phenomenon caused by io conflicts.

Solution: This phenomenon occurs relatively rarely, and if it does, you can remove the band from the system! No. or? restart the computer to confirm, or ask the expert to manually allocate system resources.

1. Regularly manually back up important registry files to avoid irreparable errors caused by failure to replace backup files in time after system errors.

2 Try to avoid abnormal shutdown to reduce the loss of important files. Such as vxd dll files, etc.

3 For ordinary users, as long as it can run normally, there is no need to upgrade the BIOS and drivers of the graphics card and motherboard to avoid the harm caused by the upgrade. .

4. Regularly check and optimize system files, and run the "System File Checker" to check for file loss and proofread versions. For details about the inspection procedure, see the previous section. .

5. Reduce the installation of useless software, and try not to manually uninstall or delete programs to reduce the occurrence of illegal replacement files and file pointing errors.

6 If the memory is not particularly large and the hypervisor is very good, try to avoid running the large program at the same time, if you find that there is a sand and salala sound when listening to ***, you can basically determine that the fault is caused by insufficient memory

Mine was like that. There's a virus...