Will decompressing files in the USB flash drive cause multiple updates to the USB flash drive? Newco

If the target disk you decompress is not a USB disk,No,Because WinRAR works in the C disk cache decompression,Then copy the file to the target you specify,Unless you specifically set Winrar,Otherwise,The general default cache is decompressed in the C disk,So,You don't have to worry,In addition,A USB flash drive can be brushed many times,Even if you use it often,It's not a problem to use it for a few years,As long as your USB flash drive ***,There is absolutely no concern about you,As long as the general brand-name products are not fake, No problem.

Almost, I'm just saying - USB drives aren't that fragile.

Compression and then test to the U disk to take into account that it is a file after compression.,Read and write only one file.,If you don't compress it.,Read and write according to many files.。

Here's a know-it-all about the life of the USB flash drive, just look at it.

Yes, how many times it is written.

A USB flash drive doesn't have to be cherished so much, now this thing is cheaper.

What you're thinking about doesn't exist, it doesn't flash a USB stick, it just refreshes the screen.

u or other removable storage devices, I recommend compressing first and then storing, so as to save space, and secondly, the storage time will be much shorter, and the smaller your files are, the more obvious they are.

With Winrar Explorer, copy the file elsewhere.

If it doesn't work, use DiskGenius, key to hide the file and copy it to other disks, and when running DiskGenius, pay attention to clicking "File Browsing" on the right

If it's useless to unhide the file attributes, it's estimated that it's poisoned.,It's changed to a system file type.。

Unzip the copy insidegho mirror to the inside.

Isn't there a tutorial on the official website, how detailed.

The next low-level tool on the web. Call.

It depends on whether the format you compress is the same as the format you decompressed. Or see if there's anything wrong with the suffix.

The CRC of the file cannot be verified.

You take a look at the recovery with Easy Recover.

You should first make a USB flash drive into a boot disk!!

Yes, don't forget to put one in the USB flash drive as well.

Otherwise, what do you take to recover.

There are the following possible problems with the USB flash drive:

The disk is an upgraded USB flash drive. What is an upgrade USB flash drive? That is to say, your 2GB USB flash drive may actually have a real capacity of 1GB, or less than 128MB, depending on how dark the merchant is, profiteers!

Especially in the U disk bought in the electronic city, because many of them are copycats, they order special upgrades from our Shenzhen U disk manufacturers. Specifically distinguish whether yours is upgrading the USB flash drive, using software to test, or you copy 2GB of things, to another computer can be opened, if it can't be opened, it is upgraded, as you said in this case.

There is a virus on the disk, or you want to copy it on that computer, and there is a virus on that computer, this virus that works specifically on the USB flash drive. Try it on another computer to see if you can.

4.That's pretty much the above question.,Hehe.。。。 I'm lazy typing. You don't give me points.

I am a Shenzhen U disk manufacturer, what U disk problem to ask me, or to our ** to see the U disk to solve the problem.

In general, the U disk cannot copy the application, and the copied program will have application file loss, that is because there will be a virus like a worm in the U disk, which is generally not serious. Therefore, it is best not to bake this kind of application, if you really want to copy, it is recommended that you format the USB flash drive before trying again. Good luck.

Prompt: Please insert disk, file garbled characters, data loss, plug in to the crash, device harddisk1**

The prompt is formatted, windwos cannot complete the formatting, the USB flash drive is in RAW format, and the available used is unknown.

Data recovery, U disk repair, **U disk, CD-ROM production.

The above phenomenon occurs if it is bought recently or used in an Internet café.

Congratulations on your USB flash drive, I can fix it.

Don't think that my brother is brushing points, my brother won't brush points again, and I'll do it by asking 90% of the U disk questions.

Copycat black disk.

You can unzip it first and then copy it to a USB flash drive.

Can you tell me what you bought the USB flash drive.

You can try to reinstall the system, preferably with a slow-installed disk, not ghost; If this problem still occurs, it is the hardware reason.

You turn off the cache of the CPU and give it a try

It should be that the memory is broken, I have encountered this situation before, lz can change the memory to try it!

Causes of "freezing" of your computer.

Today's computer is close to the degree of full popularity, and it provides great convenience for people in work and study, but the "crash" of the computer has become an inextricable and inextricable annoyance for ordinary computer users. Whenever the computer is turned on, or when the operating system is started, or when some applications are used, or when you are about to quit the operating system, the "beast" of "crash" may pounce on you at any time. So, what can you do to avoid the annoyance of your computer "freezing"?

1. Causes of computer "crash":

1 "Crash" caused by improper BIOS settings

Each hardware has its own default or specific working environment, and it cannot be set beyond its working authority, otherwise it will crash because the hardware does not meet this requirement. For example, if a memory module can only support DDR 266, but it is set to DDR 333 specification in the BIOS settings, it will crash because the hardware does not meet the requirements, and if it can work normally in a short time, the electronic components will gradually age with the increase of use time, and the resulting quality problems will also lead to frequent "crashes" of the computer.

2 "Crashes" caused by hardware or software conflicts

The "crash" of computer hardware conflict is mainly caused by the conflict of interrupt settings, when there is a hardware conflict, although the hardware can barely coexist in the system, but can not work at the same time, such as can not listen to the Internet when you can not listen to the ** and so on. Over time, interrupted conflicts will occur frequently, and eventually the system will be overwhelmed and cause "crashes".

There have been cases like this before, and it turns out that the memory module is fake, and after changing it, there is no blue screen.

If there is a problem with your driver, or there is a conflict, try to reinstall your driver, don't use the one that comes with XP, install the driver that comes with your motherboard graphics card.

There is an error in the verification of the Chinese part during the decompression process, the estimated speed of the U disk is not enough, and the file is decompressed directly from the U disk to the hard disk, it is recommended to copy the file to the hard disk and then decompress.

1.Passing a test does not necessarily guarantee success in other situations.

2.It is recommended to try swapping out the memory.

3.Check the settings of the CPU options in COMS.

4.Check the drive side under it.