What should I do if my computer can only access the Internet on the router?

It should be a problem with your system.,It's recommended that you reinstall the system.,I guess you're using XP.,The current XP has been nothing stable since the tomato garden fell.,And there are many problems.,Compatibility is also poor.。 It is recommended that you install an advanced system, such as Vista or Win7, and the current piracy is doing better, and it is definitely no problem to activate. Your reason is due to a system issue, it may be that this dialer software of yours is not supported (or incompatible), or you are experiencing a transmission error or decoding error while transferring data.

And with the router is that you put the relevant and password and other information into the router, it directly replaces the computer dial-up, after success, it directly compiles the network data into a data format that the system can directly identify, your computer is equivalent to access the LAN established with the router, the router is your direct server, in layman's terms, data transmission is similar to the principle of accessing the files in your own hard disk. Your computer, hardware is no problem, you can rest assured of this. My only suggestion is to reinstall the system, install a different version of the system or try a different version of XP.

Of course, you can also try to fix your computer, but the success rate is not high and it is very troublesome.

You can see if the Remote Access Connection Manager service is enabled; Telephony service.

Don't find the reason, back up the current system, and then reinstall the system to see if it can be solved.

Find a crossover network cable, a network cable connector, connected to the original network cable, it may work, my current machine and this router are to use crossover network cables, with normal network cables are very slow. It's okay to match other routers, and it's no problem for this router to be paired with other machines, but this router must be crossed. (One end is headed by type A, and the other end is headed by type B).

Routers are generally not available on the school network. The main thing is to prevent the phenomenon of multiple uses of the first number. However, some routers can be used after flashing the system.

It can be used, just set it up correctly.

Summary. Is your router set up, it's not as simple as a direct routing of network cables, you need to set up the routing through your mobile phone or computer before it can be used normally.

Install a router in the campus classroom, plug the network cable directly into the computer, you can connect to the network, there is no network when connected to the router wan port, wifi and no network, the router is normal to ask for answers.

Is your router set up, it's not as simple as a direct routing of network cables, you need to set up the routing through your mobile phone or computer before it can be used normally.

1.The connection line connects the carrier's broadband network cable to the WAN port or WAN port of the router. You can also refer to:

After the line connection diagram is connected, if the indicator light corresponding to the WAN port does not turn on, it means that there is a problem with the line connection, please check that the network cable is firmly connected or try to change the network cable. For the solution, please refer to: The network cable is connected to the indicator but it doesn't light up?

2.Set up your router to surf the Internet(1) Check the name of the router's factory wireless signal on the bottom sticker of the router. (2) Open the wireless settings of your phone and connect to the router's factory wireless signal.

3) After connecting to Wi-Fi, the phone will automatically pop up the router's settings page. If it doesn't pop up automatically, open your browser and enter it in the address bar. Set the login password of the router in the pop-up window (the length of the password is between 6 and 32 bits), which will be used to manage the router (login screen) in the future, please keep it properly.

As shown in the following figure: (4) After successful login, the router will automatically detect the Internet mode. 1) If the Internet access mode is detected as automatically obtaining IP Internet access, click Next directly without changing the Internet access mode, as shown in the following figure

2) If it is detected that the Internet access mode is broadband dial-up Internet access, you need to enter the broadband and password provided by the operator, and click Next to set it after entering, as shown in the following figure: (5) Set the wireless name and wireless password of the router, and click "Finish" to save the configuration. Please be sure to remember the wireless name and wireless password of the router, which will be used when connecting the router wirelessly in the future.

Note: It is recommended to set the wireless name to letters or numbers, try not to use Chinese and special characters, to avoid some wireless clients do not support Chinese or special characters, resulting in no search or no connection. 3.

Connect your phone and computer to surf the Internet(1) Search for the wireless name on your mobile phone and enter the wireless password to reconnect to the wireless network. Once you reconnect, you will be able to access the Internet. (2) The wired computer is connected to the LAN or WAN port of the router with a network cable, and the confirmation indicator light is on, so you can access the Internet without other operations.

The network cable jack provided on the wall is the LAN of the campus network, and the router is not needed to dial up or obtain IP, as long as the router's routing function is shielded and used directly as a switch.

If the router (a newer model) has an AP (Access Point) function, then it is very simple: go to the router settings, set the AP to Enable, and then connect the network cable to the WAN interface of the router, and the computer can access the Internet through the WiFi or LAN interface of the router.

If the router (the router of the old model).There is no APfunction, then follow the steps below:

a.Go to the router settings and set DHCP to Disable (i.e., shield routing function).

b.The router sets a fixed IP address (this is subject to the IP address rules of the campus network, if you don't know.) You can first plug in the computer, see what computer automatically obtains the IP address, and then set the router to the same IP address).

c.Connect the network cable to any LAN interface of the router (note that the WAN port is not used when it is empty).

d.The computer can access the Internet through the router's WiFi or other LAN interface.

Hello, this is because the network management is blocking the router.

When the network detects that the router is connected, it can block the device. So, there is a problem description. If necessary, you can go to the NMS to apply for permission to join the router.