How to Break the Bandwidth Limit of the Campus Network

It may not be limited by software, but it is done on the main route. Find a way to do port mapping.

First of all, we click on the [Butler] icon on the desktop of the mobile phone to enter it. Butler is a security program that comes with the system.

Then we enter the interface, click the [Settings] button in the upper right corner.

Then we are inside, click on the [Settings] button on the top right.

Then we click on the [Daily Data Usage Notification] and [Monthly Data Usage Notification] options respectively.

In the daily data usage notification option, click [Off] to cancel the daily speed limit on your phone.

Mobile phone, the full name of mobile ** or wireless **, commonly known as mobile phone, was originally just a communication tool, and in the early days, there was a common name of "big brother", which is a portable ** terminal that can be used in a wide range, and was first developed from the battlefield mobile machine manufactured by Bell Labs in 1940.

In 1958, the Soviet engineer Leonid. Kupriyanovich invented the -1 mobile**, and in 1973, American Motorola engineer Martin Cooper invented the world's first commercial mobile phone.

After the 2G era and the 3G era, it has developed to the 4G era so far, and the 5G era is also closely followed, and 5G has been commercialized in China.

If we go back to it, we will find that the concept of mobile phones appeared as early as the 30s, when Bell Labs, the largest communications company in the United States, began trial production.

In 1930, Bell Labs created the first so-called mobile telecommunications**. However, because of its size, researchers had to put it on a shelf in the lab, and slowly people forgot about it.

Summary. First of all, we open [i Butler] on the desktop of the mobile phone, select [Traffic Monitoring] in the Security Center interface, and click [Settings] in the upper right corner of the screen;

Then click [Data Usage Limit] and turn off [Daily Data Usage Limit] and [Monthly Data Usage Limit].

Then return to the traffic management homepage, select [Network Management], and select the application you want to use the traffic in [Data Network].

It should be noted that if the carrier's speed limit may be overloaded, it will be automatically lifted after deducting the fee at the end of the month.

How to remove the campus network speed restriction on mobile phones.

i housekeeper ; Mobile phone traffic is something we can't do without when we go out, but sometimes the speed limit is limited when the mobile phone is used, and today we will share with you how to lift the speed limit of the mobile phone card; First of all, we open [i Butler] on the desktop of the mobile phone, select [Traffic Monitoring] in the Security Center interface, and click [Settings] in the upper right corner of the screen; Then click [Data Usage Limit] and turn off [Daily Data Usage Limit] and [Monthly Data Usage Limit]. Then return to the traffic management homepage, select [Network Management], and select the application you want to use the traffic in [Data Network]. It should be noted that if the carrier's speed limit may be overloaded, it will be automatically lifted after deducting the fee at the end of the month.

It's a campus network. It's a campus network.

Campus network speed is generally limited, because the school's network resources are reasonably allocated, so it is impossible to make a computer very fast, so how to remove this speed limit? I'll give you a detailed demonstration below; Step 1: We hold down the win+r key on the keyboard and enter it in the pop-up run; Step 2:

Click on Computer, find the management template, and then find Network; Step 3: Locate the QoS data planner in the network; Step 4: Find the limit that can reserve the bandwidth and click to enter; Step 5:

Click Enable, then change the broadband limit to 0%, click Apply, so that your network speed will be lifted from the campus network speed limit;

Mobile phone big brother. I'm sorry to check and that's the only conclusion I came up with.

In fact, many schools use IP address binding MAC address to surf the Internet, which limits the needs of students to use the network, in fact, the solution to this problem is very simple, that is, use a router, as long as the bound MAC address is mapped to the router, use the MAC clone function of the router to solve this problem. Here's how:

First, connect the network cable to the computer to surf the Internet normally, then start the command prompt, enter "ipconfig all", get the current Ethernet local connection items of the IP, network card MAC, gateway, DNS and other parameters, you can see that the IP address and MAC address of the machine are "and "50-E5-49-C9-9D-FF" respectively, now write down this information.

Second, prepare the network cable to connect the LAN port of the wireless router to the computer, then enter the router settings interface, switch to "Network Parameters MAC Address Clone", and then click "Clone MAC Address", so that the MAC address of the current router is set to be the same as the MAC address of the current computer network card.

Third, continue to switch to "Network Parameters LAN Port Settings", set the LAN port IP to because the network segment of the school switch is a network segment, and the network segments should not be together here), and then click "Save".

After completing the above settings, continue to turn on the wireless hotspot of the router, then disconnect the network and turn off the computer, and finally connect the school network cable to the WAN port of the router, so that the mobile phone or tablet can turn on the Wi-Fi connection to access the Internet wirelessly.