X86 compatible with Desktop, XP, P4 478 pin , ASUS P4S8X

Updated on technology 2024-04-09
15 answers
  1. Anonymous users2024-02-07

    Add the memory to at least 2G, and change the graphics card to a graphics card with high video memory.

  2. Anonymous users2024-02-06

    Support socket 478 No problem, but this thing is from the Pentium era, it's going to be antique, and it can be supported by brushing BIOS.

  3. Anonymous users2024-02-05

    Socket 478 is supported.

    No problem. But this thing is from the Pentium era.

    It's going to be an antique.

  4. Anonymous users2024-02-04

    Hello, CPU that supports socket 478, you can go to the official website for detailed consultation, or if it doesn't work, you can flash BIOS.

    Hope it helps.

  5. Anonymous users2024-02-03

    Then you can use ASUS P4GD1! It's best to change the power supply to a larger 300w, which should be fine!

  6. Anonymous users2024-02-02

    E's good, after all, there is a 1M L2 cache, but the power consumption is very high, about 110W at full load, and the heat is huge. C's only has 512K of cache, but consumes only 87W.

  7. Anonymous users2024-02-01

    Almost e is a little newer, the cache is a little larger, the instruction set is a little more, and the power consumption is slightly larger, so E is recommended

  8. Anonymous users2024-01-31

    The defeat of the 478s was nothing more than overclocking... If you've played it, you know, don't look at the surface data, but look at the essence of the 478 era of p4eIt's inefficient

  9. Anonymous users2024-01-30

    In the 20 years since its establishment, relying on its strong scientific research, manufacturing and marketing strength, ASUS has achieved five world rankings.

    1. A world first.

    2. Two outstanding achievements of the world's fourth place - the world's first in the world's shipments of motherboards, graphics cards, ADSL modem, cable modem, and wireless network products; the world's second largest game OEM manufacturer; Notebook computers and optical storage products are the fourth in the world.

  10. Anonymous users2024-01-29

    The desktop P4,478-pin machine can be used on the motherboard of the P4 CPU, and its graphics card slot restricts it to the graphics card that can only use the AGP interface. At present, the mainstream is the PCI interface. So you can only match the old graphics card.

    The AGP version of the 6200 7300GT is just fine. It's a bit hard to find, though. It's a good idea to upgrade your memory to 512MB.

    Otherwise, it will be a bit slow to run. If you need a graphics card, I've got a 5200 128mb on my side and sell it cheaply for you!

  11. Anonymous users2024-01-28

    Compatible with up to DDR400 memory.

    Now Kingston 1G DDR400 water is 310 yuan.

    Kingston 512M DDR400 water 160 yuan.

  12. Anonymous users2024-01-27

    Hello: Compatible with up to DDR400 memory, Kingston 1G DDR400 Kingston 512M DDR400 .

    Hope it helps.

  13. Anonymous users2024-01-26

    It depends on whether it is a mobile motherboard chipset. Mobile processors cannot be installed on desktop boards. Although it can be installed, its octave will be locked (P4M seems to be locked at 9 octaves, so there is only 900M main frequency).

  14. Anonymous users2024-01-25

    Laptop CPUs and desktop CPUs are not the same and are not interchangeable!

  15. Anonymous users2024-01-24

    Brother, you have to make up for your knowledge.

Related questions
8 answers2024-04-09

ARM and X86 are two CPU architectures, X86 is the CPU architecture dominated by Intel, mainly the CPUs produced by Intel and AMD. >>>More

2 answers2024-04-09

First of all, confirm whether the CPU is overclocked, if there is an overclocking situation, enter the BIOS, reset back to default and save. The method of entering BIOS is generally to press F10 for brand machines, and press the Delete button for assembly machines. Turn on and see if the blue screen continues. >>>More

3 answers2024-04-09

<>2. A warning window pops up, and we click "Yes".

3. Enter in the cmd window: for %1 in (%windir% system32 *.).dll) do s %1, just copy this command, and then right-click in the cmd window and select paste. >>>More

4 answers2024-04-09

The memory is hard, and the system is all problematic.

12 answers2024-04-09

It turns out that the shutdown doesn't have a blue screen, right? If yes, try to uninstall all the software, drivers, and patches before the accident, or if it doesn't work, please restore the system or reinstall it (in addition, the hardware has not been upgraded recently?). Do you think there's a problem with a piece of hardware? )。 >>>More