How to solve the 0x0000007f blue screen on the computer

Updated on technology 2024-03-12
2 answers
  1. Anonymous users2024-02-06

    First of all, confirm whether the CPU is overclocked, if there is an overclocking situation, enter the BIOS, reset back to default and save. The method of entering BIOS is generally to press F10 for brand machines, and press the Delete button for assembly machines. Turn on and see if the blue screen continues.

    What is the cause of the computer blue screen**0x0000007f and how to fix it?

    Unplug the memory module, wipe the gold finger, clean the memory slot with a brush, try the memory module in another slot, or insert it into the slot in normal use. Turn on and see if the blue screen continues.

    What is the cause of the computer blue screen**0x0000007f and how to fix it?

    Unplug the graphics card, wipe the gold finger, clean the graphics card slot with a brush, and then insert the graphics card into the slot. Turn on and see if the blue screen continues. Or use a normal graphics card, replace the existing graphics card, and turn on the computer to see if the display is normal.

    What is the cause of the computer blue screen**0x0000007f and how to fix it?

    end2. Software problems.

    After confirming that there are no problems with the hardware, start troubleshooting the software. After powering on, press "F8" and select "Safe Mode" to see if you can enter the system.

    What is the cause of the computer blue screen**0x0000007f and how to fix it?

    If you can enter the system normally, view the system error log. Fix the problem based on the error log recorded by the system. As shown in the figure below, you can view the errors and solve the problems in a targeted manner. If you can't get into the system, you can consider redoing the system.

    What is the cause of the computer blue screen**0x0000007f and how to fix it?

    If you still can't start normally after the above steps, please click "Start" and "Run", enter "cmd", press Enter, and then enter "msconfig", and press Enter. Open the following window, select "Diagnostic Startup", and then click the "Confirm" button. Reboot the system and see if you can boot the system.

    What is the cause of the computer blue screen**0x0000007f and how to fix it?

    If it still does not boot normally after the above steps, enter the safe mode and use anti-virus software, security guard or system first aid kit to check for viruses and repair the system. Then, restart the system to see if it boots normally.

    What is the cause of the computer blue screen**0x0000007f and how to fix it?

    What is the cause of the computer blue screen**0x0000007f and how to fix it?

    After the above steps, if it still can't start normally, here, I suggest you reinstall the system, back up all the documents, and redo the system may solve the problem.

  2. Anonymous users2024-02-05

    Blue Screen**0x0000007f How to fix it.

Related questions
14 answers2024-03-12

Choose to enter safe mode, if there is no blue screen phenomenon, say that there is a problem with the obvious card or graphics card driver, clean up the graphics card, and then change to a graphics card driver, the latest driver is not necessarily the best. >>>More

4 answers2024-03-12

The memory is hard, and the system is all problematic.

5 answers2024-03-12

There are several possibilities for a blue screen to appear, one is that the system is incompatible with the machine, one is the hardware is incompatible, and the other is caused by a virus. First of all, you try to change to another system, if you still have a frequent blue screen, just look at your machine hardware, unplug the memory, graphics card, and hard disk and wipe it. See if there are any incompatibilities.

12 answers2024-03-12

Friend, the causes of the computer blue screen are complicated! It's a conflict between software! (Refer to Section 3, Software Incompatibility). >>>More

9 answers2024-03-12

This phenomenon is due to the fact that the memory module has been used for too long, and the gold finger of the memory module is actually made of copper. After a long time, the surface is oxidized, and the contact is poor. You can open the case, pull out the memory module, wipe the gold finger with an eraser, and then install it. >>>More