Samsung rear projection TV how to turn on to watch digital TV

Just go to the network to apply.

Millions of micro-faces on the top of the sheet.

Summary. If the TV is connected to the set-top box signal** TV program, it is recommended to turn on the set-top box signal before turning on the TV.

Good evening, dear, wow.

Plug in the Samsung TV plug,Then press the button in the lower right corner of the TV,You will find a small red dot,This is the power on button。

That's it, wow.

My TV won't turn on, there is no image.

My TV won't turn on, there is no image.

Dear, that's a problem with the TV.

You see if the wires are plugged in.

But the phone projection screen can be received.

That, the TV should be normal ang.

There is just no image.

Is it the audio and video god frequency resistant wiring plugged in the wrong liquid blind reputation or the sound jack is damaged, the audio cable of the digital TV set-top box should be correctly connected to the sound input jack alarm section of the TV, otherwise the TV screen will appear blue screen or black screen.

Whether it is the TV's ** input source is incorrect, the line is plugged in wrong or not plugged in, the cable TV output signal needs to be connected to the "wired input" jack of the digital TV set-top box, if the user line is plugged in wrong or not plugged in, it will display "big quiet signal interruption or no good signal".

If you don't have these, it is advisable to find a professional to take a break.

<>Eating whales] has always been plugged in like this, but after going out to play in the past two days, the power was turned off, and it couldn't be turned on again.

Then I don't know very well, if I could see it before, it should be okay if there is no problem now.

It is recommended that you find a professional to take a look.

Summary. One end is connected to the TV One Connect interface, as shown in the following figure.

Hello, is there something wrong with your TV that can't be turned on?

Samsung TV also needs to be connected to a device to work properly.

In the above case, please connect the hub (One Connect) to the TV to sell the ruler, and the operation method is as follows:1Connect the One Connect cable in the accessory of your TV.

Here's a reminder: The One Connect cable of the KS7300 series TV is the same at both ends, and either end can be used to connect the One Connect connector to the TV or hub.

Does this model of TV have to be connected externally to enter the system?

Yes.

Install a dangbei application market on the set-top box,Then go to the dangbei application market**Third-party live broadcast software,For example, small and micro live broadcastHDP or something,Then connect the set-top box with an HDMI cable to the TV,You can watch it when you turn it on after powering on、

Install dangbei application market tutorial:

two、Plug in the box,Open the application management in the TV box,Find the dangbei application market APK file in the USB disk and click to install。

If it can't be recognized,It is recommended to open【Tutorial center in dangbei application market】There are installation tutorials for a large number of models,Find a tutorial that matches the brand and model of your TV or box。

The emperor's will is full of pain.