Laptop Win 10 System Home Edition, Set Super Admin?

Web Links. This **You see,I don't have a win10 system on the computer at hand)This is OK with normal settings,Why use the command prompt to do it? Didn't you see that you copied me, and I copied yours?

Super administrator account, one computer is one, this is not set up, you need to log in to the super administrator account. Other accounts, no matter what they call them, are restricted. If you're saying that you can't find the administrator account, that is, you don't have the account enabled, see how below.

If your computer is newly installed and you only have a self-built account, see the following method, if not, please ask me.

Right-click on the computer or this computer Manage Local Users and Groups Users right-click"administrator"Select the account attribute, remove the tick in front of "Account disabled", and press OK.

I can't tell the difference between colon and semicolon.

As you can see from the screenshot you provided, it is caused by the wrong command entered, and the correct command is as follows:

net user administrator active:yes should be aware of spaces and symbols in commands.

I look at your second **, and there doesn't seem to be any problem with the command entered. Returning "Access Denied" is not the command you did not run as an administrator. You can try opening the command window as an administrator and then entering the command.

Summary. Hello,win10To change the administrator name, you need to right-click on this computer and click on management,Then click on local users and groups and select users,Double-click on the administrator account,Finally, enter a new name and click OK。

Hello,win10To change the administrator name, you need to right-click on this computer and click on management,Then click on local users and groups and select users,Double-click on the administrator account,Finally, enter a new name and click OK。

How to solve this situation.

Change your account type.

Or add an administrator.

How to operate it.

Try to create a local account win+x, select the command prompt (administrator), and then enter the following command (you can also right-click and copy and paste): net user username password add Create a local accountnet localgroup administrators username add to give the account administrator permissions.

There is no such option as you said.

Then try this method.

2. Enter net user administrator active:yes in the open command prompt window, press enter to execute the command, prompt the command to complete successfully, and proceed to the next step;

3. Right-click the start button - shut down or cancel - log out, log out of the system;

4. In this interface, select the administrator account to log in, the first time you log in to this account, the system configuration will be executed, and you need to wait for a while.

2. Win10 Professional Edition and other advanced versions enable the administrator method:

1. Press win+x to open the shortcut menu, select computer management, or right-click this computer directly on the desktop - management;

2. Local Users and Groups - Users, right-click Administrator and select "Properties";

3. Remove the checkmark in front of "Account is disabled", apply, confirm, log out of the system, and select the administrator account to log in.

Mine is the home version.

The same principle pro.

Try it with the first method.

Follow these 9 steps::

1. Log in to Windows 7 with the account you created during installation.

2. Start - > All Programs - > Attachments - > right click on the "Command Prompt" - > select "Run as Administrator" - >Allow".

3. In the command prompt window that opens, type "regedit", press enter, and the registry program window is opened.

4. Enter the hkey local machine software, Microsoft Windows NT CurrentVersion, Winlogon

5. Right-click on Winlogon - > Create - item (K) with the name of SpecialAccounts

6. Right-click on the newly created SpecialAccounts - > Create - > item (K), the name is UserList

7. Right-click on the newly created userlist—> New—> dword (32-bit) value (D), the name is administrator, and then double-click it to change its key value to 1

8. In the command prompt window, type: net user administrator active:yes and press enter. Wait a little and you'll have a hint of success.

9. Log out or restart, and you can see that the super administrator account is displayed! There is no password by default, so you can log in!

Steps: 1. On the start menu of the system, click the right mouse button on the crack ruler letter and select Computer Management to open and enter.

2. At this time, open the computer management window, click on the user in the wheel and the user in the group to open, and then click the administrator account on the right, double-click the mouse to open and enter, as shown in the trapped code diagram.

3. Open the properties window, cancel the checkmark before the account is disabled, OK.

Summary. 2.Click on the left menu bar under Recovery --- Advanced Boot under Restart Now.

3.Select: Troubleshoot --Advanced Options --Restart--- Option 4 after reboot (fourth option).

4.Enter the password (select your own account, not administrator) and enter the safe mode (the interface is significantly different from the normal mode: black background, the system is not loaded with many components).

5Press Win + R and enter Control UserPasswords2

6.Select: Properties—> Group Member—> make your account an administrator --- OK.

How to set the highest administrator privileges for the computer in win10 home edition.

Hello, I have seen your question and is typing to provide you with the best quality answer.

Select: Troubleshoot --Advanced Options --Reboot--- Pick 4 after Reboot (Fourth Option)4Enter the password (select your own account, not administrator), and enter the security mode Lu Portable (the interface is significantly different from the normal mode:

Black background, the system is not loaded with many components) 5 Press Win + R and enter Control UserPasswords26Select: Properties—> Group Member—> make your account an administrator --- OK.

Pls my help to you dear.

The first one can't be found.

Just look for it in the settings.

Updates & Security.

Look for what you can find. Good.

<>First, start Run with right-click administrator permissions), open a command prompt, type: net user administrator active:yes, and turn on Super Administrator.

Then, press Win+R to open the Run dialog and type netplwiz

Go to the Account Management page and reset the administrator password.

Finally, start switching the account administrator, and you can switch to administrator mode.

Further reading: Windows10 home Chinese version is easy to use?

1) Windows10 operation and Windows7 are almost the same, Windows10 combines Metro interface and Windows classic interface, the use method is slightly different, but only in operation, this use is used to more.

Suggestion: Learn to play shortcuts;

Make more use of the Start Menu and learn more about the Start Menu;

If you don't want to use the Metro interface, you can use the search function and the Internet to find it (there are many answers), special problems may not be solved, such as personally developed software and functions, which cannot be used without the Windows 10 version;

2) Windows10 is still quite good, and some compatibility issues will be upgraded by Microsoft one after another.

You can turn on the Administrator account in Windows 10 Home by following these steps:

administrator and active:yes have a space in between) and press the "enter" key.

3.If you need to set a super administrator password, you can enter the command "net user administrator 123456" (hint: 123456 is the password you set, you can customize the password) and press the "enter" key.

4.Click on the windows icon > account icon, you will find that there is an extra Oak Administrator account, and you can log in to the Super Bend Administrator account by clicking on the account.

Summary. 1. First press the "win+r" key combination on the keyboard to open the run.

2. Then enter [ in the pop-up run box and press enter to confirm.

3. In the Group Policyr, go to "Computer Configuration - > Windows Settings - > Security Settings - > Local Policies - > Security Options".

4. After entering the security options, double-click "Administrator Account Status" on the right side.

5. In the administrator account status, check "Enabled", and then click "OK" below to save to get the administrator permissions.

How to become an administrator in win11 home edition.

1. First press the "win+r" key combination on the keyboard to open the run. 2. Then enter [ in the pop-up run box and press enter to confirm. 3. In the Group Policyr, go to "Computer Configuration - > Windows Settings - > Security Settings - > Local Policies - > Security Options".

4. After entering the security options, double-click "Administrator Account Status" on the right side. 5. In the administrator account status, check "Served to clear the number of enabled", and then click "Confirm before the old" below to save Biyin to get the administrator permissions.

1. Click the start menu and select "Settings". 2. In the settings window, open the "Leaky Account". 3. After entering the account window, switch to the "Family and other users" item, and click Local Account under Other Users to change the account type.

4. Finally, set the local account as the administrator and make sure it takes effect. Insight if the user feels that win11 computer system problems are more, you can reinstall the system to solve, after reinstallation only a manager account for users to log in is very convenient, and will never encounter the problem of insufficient permissions in the future.