What should I do if the leaves of the orchid grow crooked?

Those who have raised Junzi Orchid know that Junzi Orchid is very ugly after it grows obliquely, and it is difficult to make Junzi Orchid grow back without the right method, because it is not careful in the process of raising, or does not know how to raise Junzi Orchid at all, it is easy to raise Junzi Orchid crookedly, not coordinated at all.

If the leaves are uneven in length, it is caused by poor temperature control, and it may be that the watering time interval is irregular, sometimes once a day, sometimes only once every few days, if you want to avoid this situation, try to control the balance of indoor temperature, watering must be regular, and the amount of water should be avoided sometimes more and sometimes less.

Oblique leaves are generally in the process of growth, from a very young age the leaves will grow oblique, but also because of the owner's negligent management, to try to avoid one side of the orchid contact with the sun, and the other side can not receive sunlight, after the appearance of oblique leaves should be adjusted in time, can be used sunspot or silver white tin foil clamped on the protruding leaves for shading, such a method will not have a few days of time for the orchid to grow back to its original appearance.

Junzi orchid is a kind of potted plant with foliage and flowering, even if it does not bloom, as long as the leaves grow shiny and neat, the ornamental nature is not low at all, some friends even think that it is not bad to raise it into a foliage plant, but recently friends are very troubled, the leaves of the Junzi orchid that have been maintained for several years suddenly grow crooked, is it because it has changed a maintenance environment?

Why do the leaves of the orchid grow crooked?

In addition to the crooked leaves because of the variety, the usual leaves are crooked because there is no consequence of turning pots, because the growth of Junzi orchid has phototaxis, that is to say, its leaves will grow to the side with more sunlight, and the sunlight in contact with different leaves is very different, so it causes the leaves to grow very messy.

This is also the fundamental reason why the plant type grows more messy, generally about 180 degrees per week, so that the orchid can receive light evenly, and can maintain the perfect and neat plant type.

How to prevent the leaves of the orchid from skewing?

Usually pay attention to the direction of the gentleman's orchid.

Point the tips of the leaves in a north-south direction and rotate the pot regularly.

We can use the shading method, prepare the tin foil, cover the leaves on the crooked side, cover half of the leaves, as shown in the figure below, so that the leaves of the plant can be adjusted more quickly, so that it grows towards the side without shading, so as to achieve the effect of correction.

The reason for the crooked leaves of the Junzi orchid, if the length of the orchid leaves is different and the bottom leaf is also included in it, there are roughly four situations:

1. Junzi orchid is a broad-leaved plant, with strong phototropism of leaves, light deviation, and uneven light reception, which will cause the orchid leaves to deviate to one side.

2. Affected by the bract, orchid leaf folds, leaf core foreign bodies, etc., the pressure of the bulb part is uneven, resulting in the deviation of the core leaf.

The above situation can be corrected by tin foil shading, that is, using tin foil or other opaque paper to wrap the longitudinal center line of the oblique orchid leaf on one side, and remove the shading paper in time when it is close to correction. The length of tin foil correction time depends on the newness and age of the orchid leaves. In general, the new leaves are three to five days, the half-old leaves are seven to half a month, and the old leaves are basically ineffective.

Therefore, it is necessary to observe diligently, and correct deviations.

3. In the process of cultivating Junzi orchid, due to the relationship between light, temperature, temperature difference, humidity, water and fertilizer, the length of orchid leaves is different. You Lanyou said: "If you want to avoid this situation, you must try to control the balance of indoor temperature, watering must be regular, and the amount of water must also avoid sometimes more and sometimes less .......""It's putting the cart before the horse.

Spring, summer, autumn and winter, the seasons are different, the temperature (temperature difference) is different, the dry and wet are different, and it is difficult or impossible to control the temperature. What can be controlled is to try to do a good job in the adjustment and dosage of light, water and fertilizer according to different seasons, especially the allocation of water and fertilizer according to the temperature, which is precisely the key to raising a good Junzi orchid, which requires technology and experience. Due to space limitations, I will not repeat them.

4. The bottom leaf of the pot (holding the pot) is mostly determined by the variety of Junzi orchid, and it is easy to lie on the pot when it is small. After the generation or the better quality of the anti-string Anshan orchid, after one or two arrows, the bottom leaf is also easy to hold the pot. In addition to the variety factors, the usual maintenance needs to pay attention to:

Avoid direct sunlight on orchid pots; The potting soil should not be too dry for a long time; The color of the balcony floor and window sill board placed by the gentleman's orchid is as close to dark as possible, and the light color is used sparingly, and the white color is avoided, so as to avoid reflection and pull the bottom leaf.

If the leaves of the orchid grow crooked, it will be corrected with a rope, and after it is tied, it will be corrected after growing for a period of time, which is suitable for many flowers and plants.

When the leaves of the orchid are crooked, you can adjust the direction of the pot every day, and you can often rotate the pot, or clamp it with a small clip, if necessary, put a piece of paper in the middle, or use a fixed paper splint to fix it, which can prevent the leaves from being skewed seriously and restore the natural growth ability of the leaves.

1. Adjust the flower pot

Orchid is a common light-loving plant, the leaves will grow more luxuriant under the action of light, if the light is uneven for a long time, it is easy to cause some of the leaves to grow crooked, so what to do if the leaves of the orchid are crooked, at this time we should often adjust the direction of the pot, and the pot should be rotated frequently every day, so that each part of the orchid can receive light evenly and maintain the shape of the leaves.

2. Correction of paper pieces

It is also a common method to correct the crooked leaves with tin foil, which can effectively inhibit the growth of the blades, mainly with a relatively soft small clip, wrapped with a layer of paper on the surface of the blades, so as to avoid the blades being damaged by the jaws and affecting the appearance, and the long crooked blades can be clamped together.

3. Shading treatment

We all know that the leaves of the orchid are grown according to the sun, if the light on which side is too strong, it will cause the leaves to grow crooked, at this time, you can use tin foil to cover the skewed part of the leaves, the leaves are inclined to cover that side, and you have to turn the pot every day, you can quickly resume growth.

4. Fixing the blades

If it is from the front, when the leaves of the orchid are skewed, the distance between the leaves will also be expanded, and the distance between some of the leaves will also be reduced.

Repot regularly.

The leaves of the orchid have phototaxis, one side of the sun is exposed to sunlight for a long time, and the other side will be crooked because of the lack of sunlight, at this time, it is necessary to rotate the pot 180 degrees every 2-3 days to make the plant receive light evenly.

1. You can turn the pot regularly as mentioned above, but this method needs to be adhered to, and the recovery time takes a long time, that is to say, you have to turn the pot 180 degrees every week, insist on it every week, and after half a year, you may only be able to improve a little bit, be patient.

2. We can use the shading method, prepare tin foil, cover the leaves on the crooked side, cover half of the leaves, so that we can quickly adjust the leaves of the plant, so that it grows towards the side without shading, so as to achieve the effect of correction.

3. We can prepare some relatively thin foam, drill some leaf-sized holes on it, and then carry out proper regular repotting, which can also correct the leaves well.

4. Mechanical correction, you can use small clips to carry out mechanical correction, find some softer clips, find some soft paper, wrap the long crooked leaves with soft paper, clamp the leaves with clips, and after a period of time, the leaves of the junzi orchid will be aligned.

5. Soft wire correction, intercept several sections of soft wire, bend the wire into the shape of a leaf, wrap a hard paper at one end of the leaf, and clamp the soft wire on the leaf to correct.

6. Cover holes in cardboard, make holes in the cardboard according to the size of the leaves, put the leaves in the cardboard, and after a period of time, the leaves will grow along the way.

If it is only a slight long crookedness, it can be corrected by turning the flower pot, so that the other side faces the window sill, and it can be corrected naturally by adjusting the light-receiving surface of the Junzi orchid, this method is only suitable for slight long crookedness, and it can be used in time when found.

If it can be clearly seen that the long crooked leaves can be corrected by shading, the specific operation method is to use tin foil or a special shading plate to cover the crooked side of the crooked leaves, so as to avoid the crooked part of the leaves to receive light again, so that the junzi orchid will gradually grow back. Do not use particularly strong clumps on the shelves that fix the tin slag paper, otherwise it will hurt the leaves.

Physical intervention, where the long crooked leaves are aligned with the normal leaves, can be padded with a piece of cardboard to avoid injuring the leaves, and will gradually adjust after a period of time.

Causes and prevention of crooked leaves of Gentleman's Orchid

The main reason for the crooked leaves of the orchid is the uneven light, especially in the environment of indoor maintenance, the leaves are more likely to be crooked, because the indoor point of receiving the sun source is only the window, and the growth of the orchid is inseparable from the light, so which side is against the window, the leaves of the orchid will grow in which direction.

When we are taking care of the Gentleman's Orchid, the best thing is to prevent this problem in advance. Rotate the Gentleman Orchid pot once a week to allow the leaves to alternate with light on both sides. Insert the fixed coil twice in the Junzi orchid, and avoid long crooked through physical fixation, the style of the fixed coil is as shown in the figure above, you can use the hemp rope around the outside of the wire to make it, which can not only avoid hurting the blade but also prevent and control the crookedness.

Correction method for the crooked leaves of the junzi orchid:

1. Adjust the direction of the flower pot.

The basic reason for the crooked leaves of the orchid is because of the light problem, because the growth of the orchid has phototaxis, they will grow towards the place where there is light, and over time it will make the leaves of the orchid grow crooked, so it is necessary to rotate the pot regularly for the orchid, so that the leaves can receive light evenly, so that the leaves can grow normally.

2. Correct the blade with a clamp.

The effect of this method is very effective, before using this method, you should find some softer clips, and then find some softer pieces of paper, and then wrap the long crooked leaves with pieces of paper, and then use the clips to clamp the leaves, and slowly make the long crooked leaves corrected.

3. Tin foil shading.

But you can also use this method of tin foil to correct the leaf of the junzi orchid, first wrap the tin foil, and then fix it with a pin, that is, the leaves are crooked to that side, then cover that side, if the leaves of the junzi orchid are not very crooked, it can be returned to normal in about half a month, if it is crooked, it doesn't matter, it will slowly return to normal.

Maintenance methods of Gentleman's Orchid:

1. Soil, soil is the most important part of plant survival, Junzi Orchid likes humus-rich soil, very fertile, and air permeability and water permeability are relatively good, suitable for the respiration of the roots of Junzi Orchid.

Second, light, the growth of any kind of plant is inseparable from the irradiation of sunlight, and the same is true for Junzi Orchid.

3. Temperature, another important condition required by plants is temperature, Junzi Orchid likes semi-shade and cool environment, 15-25 is the most suitable temperature.

Fourth, water, the gentleman's orchid should not be watered too frequently, and then watered when it is dry on the surface of the potting soil.

If the leaves of the orchid are seriously crooked, you should: adjust the direction and turn the pot regularly.

1. Adjust the direction

Orient the pot so that the leaf tips are facing the light source. After changing the pot or soil, you also need to pay attention to the direction of the pot.

2. Turn the pot regularly

In addition to ensuring that the leaf tips of the plant are facing the distance, it is also necessary to rotate the pot regularly to avoid asymmetry of the left and right leaves. When rotating, it is necessary to pay attention to the rotation of the pot at 180°, so that the leaves on the other side can fully receive the light, and cannot be rotated at will.

Four Seasons Maintenance of Monarch Orchid:

Monarch orchid is generally repotted every 1 2 years before leaving the house in spring (flowering plants should be repotted in autumn). Junzi orchid is not exposed to strong direct light, after the summer to move the pot to a cool place in time, the light intensity in autumn gradually weakens, to gradually increase the light time, in order to facilitate the differentiation of flower buds. In winter, it is best to keep the indoor air humidity at 60% to 70%.

1. Adjust the position regularly.

There are usually two ways to place the orchid: one is placed parallel to the balcony window, and the other is placed perpendicular to the balcony window. It is worth noting that regardless of the arrangement, we should regularly turn its orientation 180 degrees clockwise or counterclockwise.

This regular cycle can be once every 7 days during the peak season and once every 10 days during the slow growth season. Because most of the causes of uneven leaves are caused by uneven lighting, this requires us to adjust the position regularly.

2. Manual trimming.

If there is already an irregularity, we can adjust it. You can use a small clip to clip the crooked leaf with the leaf next to it, and in order to prevent the clip from hurting the blade, we need to put a paper towel in the middle. After a while, the crooked leaves can basically be restored.

3. Light control.

This method is relatively simple, we can prepare a few sheets of opaque tin foil or other opaque thick pieces of paper, and cut them to the same width and length as the blades. Then fold the paper in half from the middle vertically, then wrap the half of the leaf that has been crooked with the paper, and finally use transparent tape to stick the paper tightly on both sides of the leaf. After about 10 to 15 days, the leaves that have grown crooked can be corrected.

Cultivating Junzi orchid can use Bika water-soluble fertilizer.