What to do if there are too many roots of the orchid, what to do if the roots of the orchid are full

Monarch orchid is a high-quality precious flower, with high ornamental value, many flower friends will raise a pot at home. However, many flower friends often encounter the situation that the roots of the orchid look clean and complete on the surface but empty inside, which is commonly called empty roots. What should I do if there is an empty root in Junzilan?

1. Dry the roots. First dig out the Junzi orchid from the pot, depotting, after the whole plant is dug out, clean the soil of the roots, put the root system down, put it in the pot to dry the roots, and the time to dry the roots is 2-3 days.

2. Change the pot. After drying the roots, mix the old soil and the new soil in a ratio of 1:1 to ensure that the potting soil is in full contact with the orchid root, and then water it with sufficient organic nutrient solution of phosphorus and potassium fertilizer, which can not only inhibit the aerial root well, but also help the orchid to flower.

3. Watering. Watering is the need to water the gentleman's orchid thoroughly, need to be watered several times repeatedly, do not stop watering as soon as you see the bottom of the pot flowing water, sometimes the bottom of the pot running water planting material is still dry.

It can also be watered using the "pot sitting method". That is, the orchid pot is placed in a container containing water, so that the surface height of the potting soil is basically the same as the height of the water surface in the container, so that the water slowly rises from the bottom of the pot to fully moisten the planting material. This method of watering is most uniform and sufficient.

The root system of the orchid is too long, should it be cut off?

After the roots of the orchid are full of pots, the orchid can be pruned properly, and the excess root system can be pruned off using sterilized scissors. It can also be repotted, and the orchid can be transferred to a larger pot for maintenance, so that the root system of the orchid can be comfortable. If there are too many roots, you can also depot the orchid and propagate it, and after a period of time, it will grow into a new plant.

The roots of the orchid can be properly pruned after the pot is full, the pruning time can be selected in the spring and autumn of each year, the temperature and precipitation in the spring and autumn are more suitable, which can speed up the recovery of the wound of the orchid, the pruning can be carried out with sterilized sharp scissors, and after the pruning is completed, it is necessary to spray carbendazim solution on the wound to avoid infection of the wound.

After flowering, it is found that there are too many Junzi orchids, you can change the pots, you need to replace the pots with more space for the Junzi orchid, you can choose the bottom of the porous and large space gap of the clay pot or mud pot as a new cultivation container, before the pot needs to lay a layer of gravel soil at the bottom of the pot to ensure that the soil has good drainage.

If there are too many roots, you can also divide and propagate the orchid in spring and autumn every year, you need to depot the orchid first, then break it from the weak part of the stem, and then apply plant ash to the wound, and then replant it into the soil, and after a period of time, the orchid can grow into a new pot.

After the pruning of the orchid is completed, it is necessary to transfer the orchid to a ventilated environment for maintenance, so that the orchid can adapt to the new living environment as soon as possible. After a period of time, the orchid can be given proper astigmatism irradiation, and an appropriate amount of thin liquid fertilizer can be applied to supplement nutrients, so that the orchid can resume growth as soon as possible.

The roots of the Gentleman's Orchid have grown out, what's going on?

The root system of the orchid is very developed, if the pot is too small, the root system of the orchid is full of pots, and some of the roots will be exposed, and it is necessary to change the pot in time. Now this season, it is the time for the orchid to give birth to buds, if the buds have already grown, it is not recommended to change the pot, which will affect the flowering of the orchid. After the end of the flowering period, the soil should be changed and the pot should be changed, and the soil should be best used to breed the special pine needle soil of the Junzi orchid, and the pot should be 2 3 cm larger than the original.

When the orchid is first potted, the roots are too shallow to bury the roots and cause the roots to be exposed, and the roots are exposed for a long time, which is easy to lack water. Treatment: Loosen the soil exposed near the roots, do not hurt the roots, sprinkle a layer of soil with good air permeability on the surface, cover the exposed roots, and wait for the spring temperature to rise, and then repot and cultivate.

Summary: The quality of the growth of the orchid depends on the maintenance and management, the growth period of the orchid should be supplemented with Cuim fertilizer in time to promote the new leaves, watering should not be too diligent, and the orchid should be able to bloom in a sunny environment in winter. If you change the soil in winter, try to control the temperature at about 20, so as not to affect the growth of the orchid.

Because the plant has not yet flowered, if we cut off its roots, it is easy to cause problems with its absorption, because the roots are the main thing to absorb nutrients. So it's better to wait for it to bloom before treating the plant, and it can still have so many roots before flowering, and the biggest reason is that we usually apply too much fertilizer to it.

If a flowering plant has a lot of roots, there are two ways to treat it appropriately.

1. Cut the roots of the plant is not satisfied with the size of the pot, too many roots will make its space crowded, and it will be difficult to absorb some nutrients, at this time it is necessary to cut off the rotten roots and long roots and old roots from the roots, and then dry it, pay attention not to let it bask in the sun, if you want to use a cigarette butt to blanch the cut place, the time of natural air drying is about half a day, and the purpose of letting it dry is to prevent bacterial infestation. After that, we planted it back in the soil and watered it again. If there are some diseased roots and dead roots, these need to be cut off, and the sticky roots also need to be removed, otherwise the growth of the roots will also be affected in the future.

2. Divide the roots of the plant too much, you can consider dividing its roots, so that it can be turned into several small pots. In this way, it can go from bursting to normal, and it can become several new plants. When dividing the plants, it is still necessary to cut off the dead and dead roots, and the good roots need to be maintained well, so that they cannot be injured.

The roots of the orchid grow, and you can take the original potting soil and plant it in a large pot.

The precautions for raising Junzi Orchid are as follows:

1. Choose loose and breathable soil. For example, garden soil, leaf soil, pine needles, perlite, cinder.

2. Add bottom fertilizer. For example, chicken fat, bone meal, compound fertilizer, take a little and put it at the bottom of the pot.

3. Watering. Monarch orchid is a fleshy quivering root and is drought tolerant, so don't water it all the time. Before each watering, pick the soil with your hands or a toothpick, and see that the soil is about three to five centimeters deep and dry again, once watering thoroughly.

4. Illumination. Junzi Lan is shade-resistant, and she can't be exposed to the sun.

There is a situation where only roots grow but no leaves, and we must start from light control, temperature control, watering control and fertilization control. Give it sufficient scattered light irradiation, stabilize the temperature between 15-25 degrees Celsius, the temperature difference is about 8 degrees Celsius, watering to ensure that the soil is slightly moist, and fertilizing is appropriate and appropriate.

1. Control lighting

It is not an abnormal phenomenon that the orchid only grows roots but not leaves, but is accumulating nutrients to give birth to leaves, which can provide it with sufficient scattered light irradiation and allow the plants to carry out full photosynthesis, so that the germination of leaves can be accelerated, but it should be noted that it cannot be exposed to strong light.

2. Temperature control

Orchid sometimes stagnates, which may be due to low or stable temperatures. Generally speaking, the indoor temperature of the cultivated orchid should be stable between 15-25 degrees Celsius, and there needs to be a temperature deviation of about 8 degrees Celsius between day and night, otherwise the orchid will not be able to digest nutrients in a constant temperature environment.

3. Watering control

It is also possible that the plant does not have enough water to support the consumption of leaves, so nutrients are used to grow the roots. When watering the orchid, it is necessary to ensure that the soil is slightly moist, not to wait until the soil is completely dry before watering, as long as the soil surface is dry, it must be watered.

4. Fertilization control

After the roots of the orchid grow wildly and the branches and leaves do not grow, we should adjust the fertilizer ratio in time, from the use of well-rotted liquid fertilizer or cake fertilizer to the use of nitrogen fertilizer-based compound fertilizer, so as to promote the growth of branches and leaves of the plant, but it should be noted that the fertilizer concentration should not be too high, otherwise it is easy to burn the roots.

There is a phenomenon of only growing roots and not leaves, you don't need to worry too much, this is it is accumulating nutrients, if you want it to grow leaves, we can strengthen the light, and you also need to have a suitable temperature, and the temperature is best controlled between 15-25. And to water it properly, it is best to keep the soil slightly moist.

1. Sufficient light

The phenomenon of only growing roots and not growing leaves does not need to worry too much, this is the accumulation of nutrients, if you want it to grow leaves, we can strengthen the light, so that it can fully photosynthesize, so that it can germinate leaves, but be careful not to let it be exposed to strong light, otherwise it will wither.

2. Suitable temperature

We can also take temperature control measures to control the temperature between 15-25, so that its leaves will germinate and grow. When maintaining the Junzi orchid, it is also necessary to pay attention to the temperature difference between day and night of 8, otherwise it will not be able to digest nutrients normally in a constant temperature environment.

3. Reasonable watering

The phenomenon of only growing roots and not leaves also needs to be watered reasonably, and it is best to keep the soil in a slightly moist state, which will help it grow its leaves. Pay attention to the watering of the junzi orchid, do not wait for the soil to dry out before watering, otherwise it is not conducive to its growth. If you observe that the soil is half-dry, you should water it.

In order for the orchid to take root, it is necessary to provide a suitable environment, and potting soil is the first step to help it take root. The soil should be as soft as possible and well drained. Soil that is too sticky is not good for the growth of the root system, and can be made of sand, vermiculite, etc., which is conducive to its rooting.

Once the potting soil is ready, you can replant the orchid. In order to have enough space for the roots to grow, you can wrap the bottom with sawdust and then put it in a pot to fill the soil. Then spray it with a little water and place it in a cool, ventilated place.

During the rooting period of the orchid, there should not be too much water, and you can wait until the surface soil is dry before watering. Do not pour water into the core of the leaf, as this will cause it to rot. You can't see light during the curing period, and wait until it takes root and then slowly increase the light.