What should I do if the computer prompts that the password is set incorrectly?

However, the last digit (1) can be set to a different number. Enter it in the mask address below and you're good to go.

There's an exclamation mark on the local link, but you can surf the Internet normally, xp is too smart

It is recommended to remove the checkmark in front of "Notify me if this link is restricted or no link" on the general tab in the local link properties.

It should be a problem with the network card

It may be a problem with the user, if not, then it is a problem with local links and network links, check it out.

Double-click the network icon with an exclamation mark, set the IP to, the same as the gateway, and leave the DNS alone.

Is your IP not set?

Add a double password and forget it: there is a prompt to press the del key to enter the CMOS when you boot up, and you can add a boot password in the second Advances CMOS! In that case, it doesn't matter if you have an XP password!

XP has a super admin password, it may have used this!

Oh, there are two internet connections.

One is a local connection.

One is a network connection.

You must keep your local connection open to connect to the network.

Your son may have disabled the local connection.

That's why you can't connect to the Internet.

You just need to turn on the local connection in the system settings.

The computer prompts that the password is set wrong, how to do a pro! Hello, I'm glad to answer for you<> Pro-1, restart the computer, press the F8 key immediately after the boot screen appears, and select "Safe Mode with Command Line". 2. At the end of the running process, the system lists the selection menus of the system superuser "administrator" and the local user "zhangbq", and click "administrator" to enter the command line mode.

3. Type the command: "netuserzhangbq123456 add" to force the password of the "zhangbq" user to "123456". If you want to add a new user here (e.g

If the username is abcdef and the password is 123456), type netuserabcdef123456 add, and then run the netlocalgroupadministratorsabcdef add command to promote the user to the administrators group and give him super privileges. 4. Restart the computer, select Normal Mode to run, and you can log in to the "zhangbq" user with the changed password "123456". I hope my Pure Xun can help you <>

Do you have any other questions?

Summary. Dear, I've been waiting for a long time! <>

Regarding the problem that the computer has no password, but when you set the password, you are prompted to enter a new password, my first step: This situation may be because the computer has already set a password, but you don't know the password, so when you set a new password, you are prompted to enter the old password.

Step 2: In order to find out if the computer has set a password, you can try to use some common passwords, such as etc., to see if you can successfully log in. If you still can't log in, it's likely that your computer has already set a password.

Step 3: If your computer has already set a password, you can try to use some password reset tools to reset your password. These tools can help you reset your password and regain access to your computer.

Of course, you need to pay attention to security when using these tools and avoid ** and using unsafe software. In addition, in order to avoid similar problems from happening again, it is recommended that you set a strong password when using the computer and change the password regularly to ensure the security of the computer.

The computer does not have a password, but when you set a password, you are prompted to enter a new password.

Dear, I've been waiting for a long time! <>

Regarding the problem that the computer has no password, but when setting the password, it prompts you to enter a new password, my step 1: Step 1: This situation may be because the computer has already set a password, but you don't know the password, so when you set a new password, you are prompted to enter the old password.

Step 2: In order to determine whether the car computer has set a password, you can try to use some common passwords, such as etc., to see if you can successfully log in. If you still can't log in, it's likely that your computer has already set a password.

Step 3: If your computer has already set a password, you can try to use some password reset tools to reset your password. These tools can help you reset your password and regain access to your computer.

Of course, you need to pay attention to security when using these tools and avoid ** and using unsafe software. In addition, in order to avoid similar problems from happening again, it is recommended that you set a strong password when using the computer and change the password regularly to ensure the security of the computer.

I had a boot password before, after reinstalling the system, there was no password for login, and I wanted to reset the login password, but it was unsuccessful, and I was always prompted to enter a new password.

1.On the login screen, click the "Forgot Password" or "Reset Password" buttons. 2.Enter your information, such as mobile phone number, email address, etc., when prompted; 3.

A verification code will be sent to your phone or email address, and once you've entered the correct code, you can set a new password. Step 2: If you've tried the above methods and still can't successfully set a new password, it may be because your information is wrong or the system is malfunctioning.

You can try contacting customer service or your system administrator for help. Step 3: In addition, in order to avoid similar problems, it is recommended that you choose a more complex password when setting the login password, and change the password regularly to improve security.

At the same time, consider using a password management tool to help you manage and protect your passwords.

1 The boot password includes the BIOS password and the password of the operating system.

2 Generally, there will be no bug in the boot password. It may be that you have forgotten your current password, so try all possible passwords, paying attention to the capitalization.

3 It is possible that you have reset your password and forgotten it. It could also be that someone else has changed the password, and you don't know it.

4 If the BIOS password is incorrect, unplug the motherboard's battery, discharge, and the password will disappear.

5 If the operating system password is incorrect, you can use the boot disk to boot it, find the program to change the password, and reset the password.

1. When the computer is turned on, the username administrator does not appear on the interface, so press and hold the "Ctrl" + "Alt" key in this interface state, and then press the "Delete" key twice in a row, which is a classic login interface of Windows, the user name is administrator, and the password is empty.

Second, you can use Windows password cracking software to clear, and the general system installation disk comes with this software.

You can do it as follows:

2. Find the power icon in the lower right corner, this power icon is definitely there. Click on the power icon with the mouse, and you can see that there are 3 options: Restart, Shut Down, and Sleep.

Hold down shift while selecting Restart. Instead of restarting, your computer will enter another interface where you can choose from multiple tiles.

3. Select Reset PC and follow the instructions to reset the computer. Note: Resetting the computer here will delete all data from the system disk and non-system, or you can choose to delete it partially, and the most important thing is to delete the previous computer settings data.

4. Wait for the computer to reset successfully to boot normally and re-create the account.

1. When we press the power switch, the power supply begins to supply power to the motherboard and other devices, at this time the voltage is not very stable, the control chipset on the motherboard will send and maintain a reset signal to the CPU, so that the CPU will automatically return to the initial state, but the CPU will not execute the instructions immediately at this moment.

2. When the chipset detects that the power supply has begun to stabilize the power supply (of course, the process from unstable to stable is only a momentary thing), it will withdraw the reset signal.

3. The CPU immediately starts to execute the instruction from the address ffff0h, as can be seen from the previous introduction, this address is actually within the address range of the system BIOS, whether it is AwardBIOS or AMIBOS, it is just a jump instruction placed here, jumping to the real boot ** in the system BIOS.

Just understand the XP system, you can find a computer without a password, copy the sam file under winnt system32 config, and then find a ghost system disk, use the disc into the system, don't start the hard disk, replace the sam file under winnt system32 config with a sam file without a password, it should be okay, I tried it before, it's okay, just make a reference.

I don't know. I'm having this issue as well. Then reboot - press F8 to enter safe mode - enter the password to enter - restart again - enter the password, and you can enter at this time. I don't know what the principle is.

See if there is a case problem, or if you are logged in with a system user.

PE boot disk, delete the SAM file under C: Windows System32 Config. In fact, many PE boot disk menus have the option to clear Windows passwords.

If you can't even forget the account number, then you can try to log in with the empty password of the administrator account after deleting the sam, if it still doesn't work, you have to find another way to delete the account you created or create a new username.

Need to use a USB flash drive PE or CD to crack the password:

1. After entering PE, open the software through "Program - System Maintenance - Windows User Password Modification". 2. The software will automatically locate the SAM file and click "Open".

3. After clicking "Open", the following interface appears, listing the system users.

4. Select "administrator", if you need to hack other users, select other users.

5. Click Change Password, and the following interface appears. If you need to reset your password, enter a new password in the input box. If you need to clear the password, click OK directly.

6. Click OK, and then click Save Changes. The password was cracked.