CAD opens Chinese display garbled characters, Western is normal, there are a lot of fonts, the natio

When opening a dwg file with R14 (and above R14), even if the Chinese character glyph file is correctly selected, the Chinese characters will still appear garbled because R14 (and R14 above) and R13 (and below) use different ** pages. Solution: You can go to the Autodesk homepage **** page conversion tool wnewcp tool to convert, if the original picture is Chinese simplified, choose to convert to GB2312 or ANSI936.

2.Writing in a block, such as writing in the title bar, some content is too long to cause the text to go out of bounds, in the version before ACAD 2000, it is impossible to adjust the text properties in the block (that is, it is impossible to adjust the block in the block), and the text properties can only be adjusted by exploding. Workaround:

Upgrade to ACAD 2002 to change the properties of the next layer of blocks in its blocks.

3.When numbers are mixed with text, the height varies, and the number is usually a little larger than the height of the text. Workaround:

I usually use the style command to specify the number with the gbenor font (acad comes with, the word height is shorter than other fonts), and the text uses hztxt font (if there is no hztxt font, you can choose another font instead).

4.When you open a CAD drawing from another company, it prompts that there is no font in the drawing, but after replacing it with another font, garbled characters appear. Workaround:

Create a new document, insert the CAD drawing as a block, and the garbled characters will disappear (but the font will be different from the original drawing, if you want to be 100% accurate, you need the other party to pass the matching font).

5.Use the Chinese version of proe to draw a good engineering drawing, when you convert it to dwg and open it with autocad, no matter how you set the Chinese font in acad, it explodes (because the text is converted from proe to dwg all into blocks), can not display the Chinese font in proe normally. Workaround:

When converting, do not directly convert to dwg format, first convert to dxf format (so that the Chinese word in ACAD will not become a block), and then use AutoCAD to open this DXF file, at this time the ACAD file font style is pure English characters, use the style command to change the font style, use big font, choose a more suitable Chinese font, and then apply, you will find that the Chinese characters won by proe are all restored. After the test of netizens, the font is almost the same as the font of proe.

6.The drawings are solid characters, and hollow fonts appear when printing. Solution: Change the value of the ACAD parameter textfill from 0 to 1.

It may be that the version used in the design is not the same as the version that is opened, or it may be that you don't have the font when you set the font when designing, if you know the font of the design setting, you can **a, if you don't know, then you can only feel the stone to cross the river - **A font package (as complete as possible), put it in the font folder under the CAD installation directory.

If the font file is missing, you can add the font file as follows:

Method 2: Find a commonly used font file in the fonts in the CAD installation directory of your computer, and then change the name to the name of the missing font, and restart the CAD;

I encountered the same problem today: I don't open the model or the drawing is not garbled, after opening the drawing, the font on the main interface is not garbled, and the tool-options interface is garbled. Workaround:

Add a font file (the specific missing font file should be related to the font file used in the drawing).

The problem I encountered before was this: without opening the file, the font on the main interface is not garbled, and the tool-options interface is garbled.

Workaround: Tools-Options-Files-Texters, Fonts, and Dictionaries. Specify the replacement font (the replacement font is used when the system cannot find the default font, the default replacement font of the system is, find a font in a font library (Song style is recommended).

Personal experience, my computer is easy to use. CAD version CAD2014 64-bit.

The problem of the version,It is recommended to use the latest version,Haochen latest out of Haochen CAD2017,You can try it。

When using CAD, many people have encountered the phenomenon of CAD fonts being garbled, and the fonts cannot be displayed or displayed as a mess of various symbols, which causes trouble to everyone. And do you know how to solve the problem of garbled CAD fonts? Let's solve this problem together.

Method 1 to solve the CAD font garbled code: If the text is not displayed, you can modify it as follows: first use the command style to open the text style dialog box.

If you find the problematic text style in the style bar, the font icon in front of the font name in the font drop-down box of the problematic text style font will not be displayed or a yellow exclamation mark will be displayed"！"。Then select the international standard Chinese Simplified Chinese font or Chinese character single line or Chinese character single line in the large font bar.

Method 2 to solve CAD font garbled: If the font is displayed as various symbols, you can follow the following steps: first use the quick selection command (in the context shortcut menu) or use the filter command (fi) to bring all the ribbons"？

's fonts are all selected. After all garbled files are selected, run the ch feature modification command. In the Properties Modification panel, you can replace all the text styles with fonts at once.

Or select a garbled font and remember the font name (for example, ntfs) in the font menu bar. Then type st, select the garbled style name in the font name, such as ntfs), and change the font name to a familiar font name such as Songti. Method 3 to solve CAD font garbled characters

If the text is displayed"？", you can do the following: first, select the problematic text, use the Ctrl+1 shortcut key to view the text style name and write it down.

Then use the command style to open the text style dialog box and find the text style name written down. Finally, in the large font column, select the international standard Chinese Simplified Chinese font or Chinese character single line or Chinese character single line.

Through the above methods to solve CAD font garbled characters, you may already know the operation steps of how to solve font garbled characters, you may wish to try it yourself. Only by practicing it can you really master it, and you will gain more in the process of encountering problems and solving them yourself.