ADSL broadband extension box, how to connect the extension for home broadband?

Broadband generally only has one line, plugged in ** can not be plugged in the cat, if you can't split the splitter can not be used at the same time, like you should be installed in this case, so that one situation is that the splitter is broken. The splitter has three heads, the main line is connected to the broadband that the operator connects to you, and the branch line is connected to the first end and the other is connected to the cat, so that the Internet can be accessed at the same time.

Go to the store or telecom business hall where you repair the ** and buy a ** separator.

The brancher generally has two mouths, one end and one end and two ports, you plug your broadband cable into the end of one port, and the other end of the two ports, one port is connected to **, one port is connected to ADSL, and it enters your computer by ADSL.

It's called a separator Some of the computer city sells for 5 yuan, and it's the one above that gives you a screenshot, The connection line port is connected to the outside line is the introduction of the line phone port is connected to the ** moden port connected to the cat on the Internet If there is no interface cable, you have to buy 2 interface cables Professionally speaking, it is called the lower rope The computer city is shouting ** line,

To be precise, it should be called a separator. It is possible to separate the voice signal from the data signal (wideband signal) in the ** line. Specific connection:

line stands for **bus, modem stands for data signal (after connecting to the cat), and phone represents voice signal (connecting **).

。。First, broadband home to the home, set up a network node. Its broadband modem is responsible for sending and receiving modem network packets, giving you an Internet entrance. It can be relied on to establish a home LAN with a wireless router, so that the family's Internet equipment can share this Internet environment.

That's right, just buy a router to realize broadband sharing! As for the settings, they are very simple, and there are very detailed descriptions in the manual!

If you don't understand, please feel free to consult!

With a router, the network cable that comes out of the ADSL cat is connected to the WAN port of the router, and the general router provides four or eight LAN ports, and the root network cable can be directly connected to the LAN port.

After connecting, enter the intranet port IP of the router, different models may not be the same, you can check the manual), prompt to enter the user name and password (generally admin), you can open the router settings interface, enter the ADSL account and password on the external network settings, and the others generally do not need to be changed. Computers on the intranet can access the Internet at the same time.

You can buy a router, it's very simple.

I don't know if you're talking about**or the computer.,If it's**, you have to add a separator.,Or from the adsl**.**Separate.,If it's a computer, it's upstairs.

If the host applies for broadband, the extension can only share the bandwidth of the host, and cannot open two broadband on the same line, of course, it works in theory. However, in the computer room of the telecom, it is necessary to change the wiring settings, which is not more troublesome. As long as you apply, Telecom will help you solve the problem, you just ask them if you can't.

Apply for the host that broadband, the host incoming line with a junction box through the ** switch, one into your house.

No, unless telecommunications specifically handle!

A ** line can only provide one ADSL broadband entrance.

Yes, you can buy a separator, but only one can be installed.

Go as high as possible, put the wire in the slot or tube if the conditions permit, if you only connect one wire, just bare wire. About 250 meters to one.

I don't know what the landlord means by installing multiple **extensions, is it a line, an extension of the same number or a program-controlled **extension? Multi-extension is a line to the user, and then the user then divides the extension, and the program control is similar. If it is more**, then how many numbers go and how many lines.

Each ADSL uses a ** line, if it is used by a family, then route.

Indoor, all locations are using the network and**2 with the module, the indoor network cable has been arranged to the user's door, the integrated step box, the user's home, the **line, with a splitter, the network and ** line are separated from the indoor 8-core network cable, divided into 2 cores, do**4, the letter connection mao and routing, probably just like this, I don't understand, I don't understand, and then ask.

The basic line length is actually the distance between the computer location and the line entering the account, as for the outdoor 200 meters, it is basically provided by Telecom.

Your 200 meters is indeed a bit long, and there is no **junction box at the door of the user?

**Line to the --- junction box (the junction box of ADSL) - junction box out of 1, junction box out of 2

The junction box comes out of 1 ---** line --- multiple extensions.

Distribution box out of 2 ---ADSL cat--- router (for ADSL dial-up) - 3 computers.

And there are three home computers that require ADSL broadband connectivity.

According to current telecommunications requirements. A computer can only use one ADSL account password, so you need to apply for 3 broadband lines.

But it can be done with routing. But. Once it is found out. game over

If it has been transformed into optical network broadband, then lead out the ** line in the voice port of the optical modem, and then connect this ** line in parallel to connect several lines with the fixed line, which is the same as the extension mode of the previous local telephone cable, and the line is connected in parallel.

Immoral sugar: Immoral sugar.

1.The billing remains the same, no matter how many extensions you install, only one number will be charged;

2.For the same number, two lines are separated, and both lines may be connected to the Internet, but two computers cannot be installed on two lines at the same time, and the Internet can be accessed at the same time;

3.The modem is equipped with a "voice splitter", also known as a brancher. This is used for wave consideration, if there is no brancher, as long as the cat outside the light is fixed, after receiving the signal, at this time, there will be a noise like rain, affecting the call;

4.The brancher has three interfaces: link --main, modem --cat, phone --**. Each interface should not be confused.

In the case of landlords, it is recommended as follows:

Buy one more brancher, plus the original one, and you will have two branchers. Two suites, one on one side. In this way, it will not be affected whether you are surfing the Internet.

There is also a way, if you only want to surf the Internet on the side of the new house, and don't use **. **Only use it in the original host's location, that can also be solved with only one brancher. That is: ** is used through the branch, and the Internet can be accessed without the branch.

Note: link --**Signal and broadband signal can be "in" and "out"! However, it can only be used as a "progress" function, and it should not be reversed.

modem -- this interface, which can pass through ** signal or wideband signal.

phone -- this interface, can only be through the ** signal, ADSL signal has been considered.

Community broadband is an account, you just have an account, that's not the same, if you want to surf the Internet at the same time, install a router, set the account in the router, and you don't need to dial again.

If there is broadband, there is generally a modem, there is a connector inside, the main line is connected, and there are 2 heads, one end is modem, and one end is connected. Pick up the modem, you will be connected to your modem, and then dial up the Internet, pick up**, directly connect **. I don't know if I understand what you mean correctly ...

It's okay to divide the back of the ** line that comes out of the ADSL junction box, don't install ADSL cats on the distribution line, it's not good.

There is a **machine splitter, which is a small thing that comes out of two after a **wire is connected, you buy one, and one is connected to the **, one is connected to the cat, and the computer is connected to the cat to the Internet.

It's a bit troublesome, ADSL Internet access can't answer faxes, ** machines and other equipment before the splitter. After connecting the voice port of the separator as much as possible (several extensions can be used), the easiest way is to install a separator for each extension (**line in, voice port out** machine).

All ** can only be connected to the back of the splitter, so that the network can be stable.

Simple, the first line of the home is connected to the divider, and the divider is connected to the living room and bedroom.

The crossover cat mouth comes out to pick up the cat.