How about Illustrator CS2 CS3 from design to printing

In graphic design, AI and PS can be said to work together seamlessly. Because they are produced by the same company, the AI doesn't matter what it was before.

Or the current cs4 or something, it's the same when you're cooked, the difference is that the higher version can directly deal with a lot of effects that need to be done in PS before, and then you can use it to check when you do film output (color separation preview command).

Personally, I think AI is better than CDR (although I'm using CDR all the time now). However, now the mainstream in China is using CDR....The disadvantage of AI is that many commands are deeply hidden and difficult to detect.

It takes a long time to explore, and then if the file size is too large, it can't run, and CDR is much better in this regard, and the more popular refractive process is made of CDR, and AI doesn't seem to work.

Illustrator is used to make vector graphics, you can use AI or other software, after all, this kind of software is the mainstream, and finally printed, or look at your design and color (color is related to the printing factory) As for the software, you think you can do it

Under the color palette, there are CMYK four color bars, and the right side of each color bar has a value that shows the color of this color bar, enter the color value you want in the value there, you need to know the CMYK four values of this color, for example, c, m, k are all 0, Y is 100, which is a very pure yellow. The yellow 133c you mentioned may be the name of a color, not a numerical number, because the maximum value in CMYK is 100%.

AI is very good.,Even from design to printing and plate making.,But there's still more PS for design.,The main thing used in printing is AI.,Because it's very fine.,This AI is the best software.,··

It's all pretty much the same. I think the Chinese version is much slower to process large pictures. The English version is not bad.,It's faster.。。

Is there a problem with the printer driver? Test it out with other software!

If it's not a problem with the printer, it may be a problem with the PS settings, in the file menu, print settings.

Can you explain, what's the problem? Does the printed ** match the actual or can't be printed? There's always a hint, right?

Spot colorsNo matter which software you are in, you have to mark them out and provide them with color samples to the printer.

Preview Print-Separations are not in the print section, CS4 has a color separation preview in the window menu.

After making the file, give it to the output center or printing house to imposition it yourself, but you have to check it well, don't go wrong!

The spot color must be marked, and then communicate with the printing house. Pattern chasing is inevitable. Believe me, it's all a result of paying tuition fees many times.

The landlord didn't say what kind of printing it is, and the general spot color printing charges are more expensive! Unless it's a single specialty. For example, silk screen printing, each spot color must be marked, and if you print four-color printing, you have to talk to the printing house that the label is useless!

In addition, the situation of typesetting is to try to use as little paper as possible, generally use the four open, typesetting is the most particular is the row of double numbers, such as horizontal row 8, vertical row 8 can reduce the knife plate fee, and the beer will be cheaper, if it is a singular number, it will be troublesome! Generally, the printing house is a beer twice, for example, a folio will make a 4-open knife to divide the beer twice! If you want to print color separation, you can go to photoshop with a channel (needless to say the specific method), and if the landlord doesn't know how to typeset, go to the printing house to teach you, typesetting is an art.

Before the film, the point is to do a good job in the file spot color, so that the output company is also labor-saving! It's best to print a copy and write clearly on the printout, which one is spot color and that one is four-color! When it's time to print, you'll be able to follow someone with you!

Illustrator can't preview separations! Usually if I want to preview the four colors, I will save a jpg in CMYK format and open it with Photoshop! Then look at the four-color situation inside! And the overprint case!

Spot colors don't need to be marked, and they will naturally be separated when the film is released.

AI doesn't have a separation preview feature.

What you're talking about should be imposition.,If you can't spell.,After you do a good job of the file.,The printing factory will impose it itself when the film is released.。

Just talk to the printer.

I feel that CS2 is more stable, CS3 is mostly a green version on the Internet, which is not very stable, but some small features have been added.

There is not much difference! It's just that CS3 has been updated in terms of features! If you want to learn software CS2 and CS3, you can do it! CS3 is recommended

There are a lot of these kinds of books in bookstores! You might as well take a look, but it's basically an instance operation! There is "Help" in the software. There are also tutorials to open.

Now I use more CS3, I also self-taught, to buy a Illustrsor case standard tutorial (usually has a CD), this is elementary, you must learn it in a down-to-earth manner, first lay a good foundation.

I've upgraded some features, and they're pretty much the same, and we're all using CS2 now.

I don't know why, AI CS3 is rarely used, I'm still using CS2, if you want to learn on your own, of course you use CS2, at least the textbooks are easy to find.

This is simply a super big problem, because no matter what software makes the file must eventually meet the printing requirements, and to meet the printing requirements, it involves a lot of places, it is recommended that you first look for this book to take a good look, but there are some most basic rules, you can refer to it, black must be single black, four-color mode, single black text to be embossed, the text must be turned, there must be three millimeters of bleeding, say so much to do, you just turn the finished file, and then hand it over to the film company.

Don't worry, first explain how you installed it, how you can't get through that step, and what prompts.

2003, this is the worst version.

Either install XP or win7.

The rest is a waste of time.

The higher version of the AI software can open the lower version normally, while the lower version will open the higher version, and many problems will occur, such as losing images, automatic twisting, merging or decomposition.

If the manuscript made with AI needs to be transmitted, it is best to choose the older version when saving, generally choose AI (CS is CS2 and so on) In the current situation of use on the market, CS3 is the majority, CS, CS2, and CS4 all occupy a certain proportion. To be on the safe side, save.

There are several issues to pay attention to when it comes to AI's outreach manuscripts:

1.Font,The landlord is worried about it very right,The other party doesn't have your font,The system will automatically replace。 Generally, after the finished product is finished, we will select all and convert it into an outline (shortcut key Ctrl+Shift+O), after the conversion, you will find that the font has become composed of many nodes.

2.Haemorrhage. It seems that the landlord does not work in a printing house, and the bleeding of making business cards must be put out. Because the print comes out there is an alignment, cutting process. As for the corners, there is no need to make them, and the printing house will check the manuscript after receiving the manuscript, and they will do the corners.

In addition, the corner line setting of each printing plant may be different, and there is no clear requirement, so it is better not to add to it.

3.Color. If you want to be a little darker, you can match C20 K100 to avoid blurred black characters and borders because of unstable color registration.

I haven't used cs4, I don't know very well, but the higher version should be opened with the lower version, and when the high version is saved, it should be saved as cs3, and a box will come out when you save it, and you can choose the version in the first one. But it seems that the text can't do this, and it's difficult to change them one by one.

I think it should be given to the AI file with corners, with bleeding, with cropping lines, if you feel uneasy, then export a PSD, this has no corners, no bleeding, and the appearance of the finished picture, that is, the white part is transparent.

If you don't have a font, you can convert it to a picture, Ctrl+Shift+O (letter O), but keep a copy of the file that has not been converted for easy modification.

English can use Chinese fonts, but Chinese can not use English fonts, Chinese should use Hanyi, Fangzheng, Wending and other fonts with names, such as Songti, Heiti, Chinese Heiti and other nameless fonts, are screen words, will be garbled. Under normal circumstances, it is not converted into a picture, the file is large, there are many anchor points, the punctuation should be suspended, the font size cannot be less than 6 points, and 6 is the minimum.

You can save it as a lower version, and the font will be OK if you turn it to an outline.