What kind of pipe is a fire plastic pipe? What material pipe is generally used for fire pipes?

It is Shanghai Yuanzhou Youmai PVC-C fire pipe, which many people are accustomed to calling CPVC pipe for fire protection, which is allowed to be used by national fire regulations. CPVC is a general term for chlorinated polyvinyl chloride plastic pipes, which were mainly used for civil water supply and power casing in the past. After 2018, CPVC can be applied to fire sprinkler, but because it is higher than the requirements of ordinary CPVC pressure resistance and fire resistance, the specification is clearly defined as PVC-C, and it needs to pass the type approval of relevant national departments.

Galvanized steel pipes are used for interior, and the materials are all iron. Ductile iron pipes are generally commonly used outdoors, and it is best to keep warm if it is cold in a cold place.

1. Ductile ink water supply cast iron pipe:

The pipe made by using cast iron above No. 18 after adding nodularizing agent and centrifugal casting at high speed by centrifugal ductile iron machine is called "ductile iron pipe", referred to as ball tube, ductile iron pipe and ductile cast pipe.

2. Copper tube: Copper tube is also known as copper tube. A type of non-ferrous metal pipe, which is a seamless pipe that is pressed and drawn. Copper pipes are strong and corrosion-resistant, and have become the basis for modern contractors in the installation of water, heating and cooling pipes in residential commercial buildings.

3. Alloy pipe:

Alloy pipe is a kind of seamless steel pipe, and its performance is much higher than that of general seamless steel pipe, because this kind of steel pipe contains more CR, and its high temperature resistance, low temperature resistance, and corrosion resistance are not comparable to other seamless steel pipes, so alloy pipes are widely used in petroleum, aerospace, chemical industry, electric power, boilers, military and other industries.

4. Composite pipes:

Composite pipe is a pipe composed of two or more materials, which is based on metal pipe, and is formed by welding polyethylene, cross-linked polyethylene and other non-metallic materials inside and outside, which has the advantages of metal pipe and non-metallic pipe.

5. Plastic pipes:

As an important part of chemical building materials, plastic pipes are widely accepted by users for their superior performance, hygiene, environmental protection and low consumption, mainly including UPVC drainage pipes, UPVC water supply pipes, aluminum-plastic composite pipes, and polyethylene (PE) water supply pipes.

Plastic Fire Tube. The plastic-coated fire pipe is based on the steel pipe, and the outer wall is coated with a thermosetting powder coating with high adhesion, impact resistance, anti-corrosion and weather-resistant, and the inner wall is coated with a thermosetting powder coating with high adhesion, anti-corrosion, and food-grade hygiene. The plastic-coated fire hose made of sandblasting chemical double pretreatment, preheating, internal coating, external coating, curing, post-treatment and other processes is a cost-effective product upgraded from traditional steel-plastic pipes and galvanized pipes.

The products have passed the fire professional certification of the National Chemical Building Materials Testing Center.

Legal Analysis: The duties of firefighters mainly include:

1. Extinguishing fires, first.

2. Emergency Rescue and Disaster Relief.

3. Inspection of fire safety facilities, publicity of fire safety knowledge, etc. In addition, participate in ambulance work, convenience services, secretarial information and auxiliary supervision and law enforcement. Firefighters have high requirements for physical fitness, strong professional ability, and must have good psychological quality, be able to maintain a stable state of mind in case of danger or emergency, good observation, judgment and thinking and memory ability.

Firefighters can be subdivided into professional firefighting teams, that is, firefighters, firefighters, fire lookouts, building (structure) firefighters, fire rescuers, etc.

Legal basis: "Fire Protection Law of the People's Republic of China".

Article 28 No unit or individual shall damage, embezzle, or dismantle or stop using fire-fighting facilities and equipment without authorization, and shall not bury, occupy, or block fire hydrants or occupy fire spacing, and shall not occupy, block, or close evacuation channels, safety exits, and fire truck passages. Doors and windows in crowded places shall not be equipped with obstacles that affect escape and fire fighting and rescue.

Article 29 The unit responsible for the maintenance and management of public fire-fighting facilities shall keep the public fire-fighting facilities such as fire water supply, fire communication, and fire truck passage intact and effective. If the fire brigade may be affected in the construction of roads, power outages, water outages, or communication lines, the relevant units must notify the local public security organs and fire departments in advance.

Legal Analysis: (1) Control of combustibles. substitution of flammable or combustible materials with non-combustible or non-combustible materials; Adopt local ventilation or full ventilation to reduce the concentration of combustible gas, vapor and dust; Items that can interact with each other and react with each other are stored separately.

2) Isolate combustibles. It is to make flammable gases, liquids, and solids not come into contact with combustibles such as air, oxygen, or other oxidants, and even if they have the effect of ignition sources, they will not burn because there are no combustibles involved. (3) Eliminate ignition sources.

It is to strictly control open flames, electric fires and prevent static electricity and lightning strikes. (4) Stop the spread of fire. It is to prevent ignition sources such as flames or sparks from escaping into equipment, pipelines or spaces that are burning or dangerous, or to prevent flames from expanding in equipment and pipelines, or to limit combustion to a certain range so that it will not burn outward.

5) Conscientiously implement the fire prevention responsibility system. Equipped with appropriate and sufficient fire extinguishing equipment.

Legal basis: Article 5 of the Fire Protection Law of the People's Republic of China All units and high-level individuals have the obligation to maintain fire safety, protect fire protection facilities, prevent fires, and report fire alarms. All units and adults have the obligation to participate in organized firefighting work.

Summary. The commonly used pipes of fire water supply system mainly include ductile iron pipes, welded steel pipes, seamless steel pipes, copper pipes, stainless steel pipes, alloy pipes and composite pipes, and plastic pipes can also be used as fire water supply pipes, but there are strict restrictions on the installation site and installation form.

What material pipe is generally used for fire pipes?

Hello, dear, glad your question fire hose is generally mainly made of ductile iron pipe.

Hello! What is the best pipe for fire fighting now.

Ductile iron pipe refers to the pipe made by high-speed centrifugal casting of centrifugal ductile iron machine after adding nodularizing agent to cast molten iron above No. 18, referred to as ball tube, ductile iron pipe and ductile cast pipe.

Which brand is good.

The commonly used pipes of fire water supply system mainly include ductile iron pipes, welded steel pipes, seamless steel pipes, copper pipes, stainless steel pipes, alloy pipes and composite pipes, and plastic pipes can also be used as fire water supply pipes, but there are strict restrictions on the installation site and installation form.

This is a ranking of fire pipes, here is a reference.

Hello, the pipes used in fire pipes include ductile iron pipes, copper pipes, alloy pipes, composite pipes and plastic pipes. Fire pipe refers to the connection of fire fighting equipment, equipment, fire extinguishing water, gas or other media of the pipeline, due to special needs, the thickness and material of the fire pipe have special requirements. Hope it works for you.

Summary. When the outdoor fire fighting is a living or low-pressure fire water supply system, you can choose to use ductile iron pipes, welded steel pipes, hot-dip galvanized welded steel pipes on the inner and outer walls of the straight pipes with low allowable pressure, etc., and some projects can try to use PE water supply pipes. When the outdoor fire water supply system is an atmospheric high pressure water supply system, if the working pressure of the system is large, flanged ductile iron pipes, welded steel pipes and seamless steel pipes should be used according to the working pressure of the system.

Hello, I have seen your question and am helping you sort out the answer, wait a minute, and get back to you right away.

When the outdoor fire fighting is a living or low-pressure fire water supply system, you can choose to use ductile iron pipes, welded steel pipes, hot-dip galvanized welded steel pipes on the inner and outer walls of the straight pipes with low allowable pressure, etc., and some projects can try to use PE water supply pipes. When the outdoor fire water supply system is an atmospheric high pressure water supply system, if the working pressure of the system is large, flanged ductile iron pipes, welded steel pipes and seamless steel pipes should be used according to the working pressure of the system.

Fire pipe specifications: DN15-DN1200.

Coated material potato sales material: modified heavy anticorrosive epoxy resin; Universal Color: Red; Coating thickness: 250um—550 um; Coating method: fluidized bed impregnation process, one-time film formation.

Ambient temperature: -30 to 80 (760 peak); Conventional Pressure:; Connection: thread, groove, flange connection, etc.; Application field: fire water supply, gas supply, foam medium transmission pipeline system.

Fire pipe fittings refer to the metal link port on the fire pipe belt, as a special material made of products, its connection operation is very simple, without special professional skills, ordinary workers can operate through a brief training. On the other hand, the performance of fire pipe fittings in many aspects such as connection sealing and compression resistance is relatively good.

1. At present, the fire trench pipe fittings produced in China can be divided into two categories:

1. The pipe fittings that play the role of connection and sealing include rigid joints, flexible joints, mechanical tees and grooved flanges;

2. The pipe fittings that play the role of connection transition include elbows, tees, crosses, reducers, blind plates, etc.

PS: There are three main parts of the fire trench pipe fittings that play the role of connecting the dense liquid seal: sealing rubber ring, clamp and locking bolt.

The rubber sealing ring located in the inner layer is placed on the outside of the connected pipe, and coincides with the pre-rolled groove, and then the clamp is fastened on the outside of the rubber ring, and then the object can be fastened with two bolts. Due to the unique sealable structure design of its rubber sealing ring and clamp, the groove connection has good sealing, and its sealing performance is correspondingly enhanced with the increase of fluid pressure in the pipe.

2. Introduction to several common fire pipe fittings:

1. Drainage and fire pipe fittings: ordinary drainage cast iron socket pipe and pipe fittings. Flexible anti-seismic interface drainage cast iron straight pipes, such cast iron pipes are sealed with rubber rings and bolted, and have excellent flexibility and elasticity under internal water pressure.

It can adapt to large axial displacement and transverse deflection deformation, and is suitable for indoor drainage pipes in high-rise buildings, which is very suitable for ground dynamic areas.

2. Cast iron pipe for water supply: mild, high-wall, thin-walled, pressure-resistant, impact-resistant, slag-resistant, corrosion-resistant, earthquake-resistant, etc. The pipe interface adopts a flexible interface, and there is also a certain elongation and deflection angle.

It has the advantages of pig iron pipe and steel pipe material, avoids the shortcomings of iron and steel, and has a high pressure bearing force for water cast iron pipe, which is suitable for the transportation of pressure fluids such as water and gas.

3. Sand centrifugal fire straight pipe: The raw material of sand centrifugal cast iron straight pipe is gray cast iron, which is suitable for the transportation of pressure fluids such as water and gas.

4. Continuous fire pipe: continuous fire pipe is a continuous fire pipe with gray mouth fire pipe, which is suitable for the transportation of pressure fluids such as water and gas.

The above is the classification introduction of common fire trench pipe fittings, I hope it will be helpful to you.

It is from the end of the threading pipe to the device, if not before, it can be connected with a metal hose.

Fire hose is an important component of modern industrial equipment connection pipeline. Metal hoses are used as wire and cable protection pipes for wires, cables, automation instrument signals and civil shower hoses, with specifications from 3mm to 150mm. Small-diameter metal hose (inner diameter 3mm-25mm) is mainly used for the protection of the sensing circuit of the precision optical ruler and the protection of the industrial sensor line.

Because the main parts of the hose are made of austenitic stainless steel, so as to ensure the hose excellent temperature resistance and corrosion resistance, the hose has a wide range of working temperature, -196-600 degrees, the hose used according to the corrosiveness of the medium through the pipe to choose the applicable stainless steel grade, can ensure the corrosion resistance of the hose.

1. The whole metal hose is made of 1Cr18Ni9Ti stainless steel, which has strong corrosion resistance.

2. The hose body is a thin-walled stainless steel pipe body hydroformed, which has strong flexibility, elasticity, strong bending and vibration resistance, and the reinforced protection of the woven mesh sleeve makes it have higher pressure-bearing capacity.

3. The connection at both ends of the hose can also be made into other connection methods except for thread and flange standards, which is convenient for connection and use.

4. This product is not only suitable for matching with rotary joints, but also widely used for soft connections for the transportation of various fluid media.

Corrosion resistance, high temperature resistance, low temperature resistance (-196 +420), light weight, small size, good flexibility. It is widely used in aviation, aerospace, petroleum, chemical, metallurgy, electric power, papermaking, wood, textile, construction, medicine, food, tobacco, transportation and other industries.

1. Flexible hose between metal hose pitches, small bending radius.

2. The metal hose has good elasticity and no blockage or stiffness.

3. The metal hose unit is light in weight and has good caliber consistency.

4. The metal hose has good flexibility, repeated bending and flexibility.

Metal hoses. Metal hoses.

5. The metal hose has good corrosion resistance and high temperature resistance.

6. The metal hose is anti-rat bite and wear-resistant, and prevents the internal wires from being worn.

7. The metal hose has strong bending resistance, tensile resistance and side pressure resistance.

8. The metal hose is soft and smooth, easy to thread, install and position.

9. There are many hose joints supporting the metal hose, which is easy to connect with the instrument and equipment.