Does the door of the house need to meet the 5m requirement?

Villa entrance door standard size.

Generally, villas will have two gates, one is the courtyard gate and the other is the entrance door; The width of the courtyard gate is generally about meters, at least for vehicles to enter and exit; Of course, the width of the villa courtyard gate should be determined according to the area of the house and the building structure, and some courtyards have a large area, and the width of the villa gate can reach 3 meters or 4 meters. There is no height limit. There are currently two most commonly used sizes for villa entrance doors, m*m, m!

Standard size for general residential homes.

The entrance door of the house is generally a mother-in-law door, with a size of 1200 2000. The width of the unit door is not less than 2000, and the height is not less than 2200. In rural areas, the double-opening size of the entrance door with a courtyard is generally used or.

Their main consideration is that they can buy finished doors in the market according to this specification, and non-standard size doors are troublesome to make. But if you consider courtyard parking, it will be calculated according to the width of your own car, but at least above!

Standard size of commercial housing entrance door.

The width of the single door, the width of the double door m and the height, needless to say; Rural bungalow, 2800mm high and 2600mm wide. Commercial housing door, you can consider using the door of the mother, the height of 2050mm and the width of the door to the door, the above are double doors!

Reserved openings for the installation of entrance doors.

With the improvement of the decoration standards of residential buildings and the popularization and application of building energy-saving technology, in order to meet the use requirements and aesthetic requirements of residents, the reserved openings and installation accuracy of residential entrance doors need to be further improved. Under normal circumstances, the elevator front room and the public passage of the commercial residential building have completed the decoration work content of the wall, ground and roof before the handover, and the residential interior is the standard for the initial decoration and delivery, and the main factor in determining the reserved height of the residential entrance hole and the installation height of the lintel is the ground structure of the lower mouth of the door.

1. When the standard of residential indoor delivery is the structural surface layer, the ground decoration height reserved for residents is usually 50mm; When the residential delivery standard is to have a ground surface layer (the leveling layer is 20mm), the ground decoration height reserved for residents is usually 30mm; When the residential delivery standard is thermal insulation layer + protective layer (protective layer is 20mm), the ground decoration height reserved for residents is usually 30mm;

2. Because the entrance door is divided into internal and external opening, according to the reserved height of 30 mm, it often cannot meet the fine decoration requirements of the residents, because the different ground materials used by the residents in the secondary decoration have different requirements for the flatness of the leveling layer (protective layer). The thickness of wooden floors and floor tiles also directly affects the accuracy of the reserved openings.

3. The construction site must use a unified indoor and outdoor decoration to install a horizontal elevation of 1 meter line or a meter line to meet the horizontal control requirements of doors and windows, floor and ground construction.

The reserved height of the entrance door opening under different circumstances: According to many years of construction experience, it is recommended to reserve the opening size of the entrance door according to the size of the attached drawings to meet the ground decoration requirements of different construction sequences and different decoration materials for construction reference.

There are two kinds of standard entrance door sizes and widths: 2050mm*960mm and 2050mm*860mm;

The parent door is 2050*1200;

The size of the edging on both sides is better than 10 cm;

The factory error of qualified products is less than two millimeters.

As long as it is opposed, it is against each other. It is possible to add a hollow crack.

Feng Shui is not about focusing on these little things. Pay attention to these are the toxin-carrying cultural ,...... of Hong Kong, Taiwan and Southeast Asia

I think the door is better, the glass is fine, the light is better, and the wooden door is also good, depending on your preference.

Too high, your favorite style.

1. If you are in a hurry to build a house, it will take a long time to sue and it is not suitable for you to solve the problem now.

It feels incongruous, at least the north and south are not transparent, and a large circle of 5 meters can be had.

1. Please introduce your sitting direction, design requirements, and the surrounding conditions of the foundation ......

There is no universal ready-made diagram, so you have to design and send me the information.

How many layers are there in total? You can send me a private message to help you take a look.

The entrance door is the first door to enter the house, also called the entrance door. 1. There are many classifications of doors, and there are two kinds of doors from the purpose of the door: first, the entrance door; Second, the interior door entrance door is the first door to enter the house, also called the entrance door.

The entrance door is the first gateway to enter the house, and of course its anti-theft performance is higher. Therefore, the entrance door is also called the anti-theft door ,..