IS THERE A 400X600 LIGHT PLATE?

Is there a 400x600 light tray? Of course, there is, the current lamp panel is still very large, and it is also very fashionable, not only will not waste electricity, but also very beautiful, so there are many people who are now using more and more big climbing.

The 400 600 lamp plate belongs to the small and medium-sized lamp panel, you can go to the decoration building materials market to search and choose your favorite style.

Yes, basically the model can be matched and can be purchased.

Of course, there are these, you can go to the lighting store and buy them, there are all of them.

This is not so big for the time being, a light disc is basically about 500 500, and this size, it can be corrected a little.

This is still more to move a single plate, I think this light plate is not very good, there is a big reason.

I don't have the impression that there is, but there are smaller ones than this, and I don't know if I can get your satisfaction.

Is there a 400 600 light plate? This Black Island Lighting pair also has a light panel of this model.

Is there a 400 600 light plate? This should be as big as it should be, depending on what you want.

Just ask about the shop or stool shop that sells this place.

There are no ceiling lamps of this size, but there are ceiling lamps of similar size that you can take a look at.

I think of course there is also this lamp plate.,This can be directly queried from the official.。

Yes, 400 600 size light panels are available for sale, you can buy them online, and they are available on **.

I can't see what your fixtures look like, and I can't help you with specifics. In general, the output line of the power supply (red + black or white + black) is connected to the positive and negative poles of the lamp panel; Red (white) is connected to the positive pole, black is connected to the negative pole, and the positive and negative poles will be indicated on the lamp plate.

Fix the lamp plate on the base, some are self-tapping, some are directly sucked with a small magnet, and then connect the two terminals separately and glue them with crepe tape!

The LED light tray is just one accessory for ceiling lights.

The lamp tray is used to fix the lamp board and the lamp shade.

Fix the lamp tray to the ceiling first, and then install the lampshade. The lamp panel is usually iron or aluminum.

Most low-to-mid non-isolated drivers use a wide range of power, and you may be the one with 25-36W, which can be used between 24-37W.

Whether the lamp panel can be installed on the gypsum board ceiling, the following questions should be considered:

1. How much weight does the lamp plate weigh?

2. Has the gypsum board ceiling been sealed and brushed with latex paint?

In the decoration process, the base of the lamp plate is fixed and connected to the base layer at the part of the lamp, which is determined according to the weight of the lamp, and usually uses an independent boom with a light steel keel, a wooden keel, a blockboard or an independent boom.

If it is not reinforced, the lamp panel cannot be installed directly on the gypsum board ceiling.

Yes.

Add a layer of large core board base between the gypsum board and the light steel keel, and you can install whatever you want.

There is no problem with the gypsum board ceiling is a wooden keel, which is a wooden square frame. The nails are fixed and strong, and the weight of the lamp can bear it. I'm the one who designed the decoration.

I'm a carpenter. It depends on whether your lamp is heavy, if it is too heavy, you have to ask the master who will help you decorate. Ask him if he has pulled a few more booms where the lights are installed. Safety first.

Hello, X600 is an upgraded version of X400, a little faster, of course, basically not perceptible to this gap.

However, the lifespan is claimed to be 25 longer than that of the X400

This depends on the area and height of your laboratory, and your conditions are not very complete, so it is difficult to answer, but I can give you an example.

Assuming that the area of your laboratory is 108m (length x width = 9m x 12m) and the height is less than 5m, to reach 400lx, method 1::

According to the lighting power density index of 12W m, the selected luminaire is a 3x18W 600x600 light panel.

Then the number of such discs is (12x108) 54=24.

Then the luminaire arrangement is 4x6

Strictly speaking, the second method of calculation is considered rigorous and scientific.

Is your lighting need to sell how much?

First of all, you have to determine your needs, ceiling lamps belong to home lighting (for individual users), if it is home lighting, there are NVC, Opple these two brands do the best if it belongs to commercial lighting (for enterprises other than individuals, **, etc.), there are: Philips NVC Sanxiong Aurora, to the Langneng you said, the full name should be Honeywell Langneng, the main commercial lighting, but in the domestic ranking is not reliable, In addition, Panasonic is also involved in commercial lighting and switches, etc., ranking is not reliable.