Toshiba 1668 makes a few copies and then copies the white paper

Don't be that troublesome. Do you want to confirm that the leaflet will not? Or do you have to make a certain number of copies before you come out? After you make a single copy, put the copied paper back on the copy side, will it be blank? If so, please replace the rear seat and clean the wires.

This is usually the result of the print head being cleaned or replaced. Here are some things you can try to fix this problem:1

Clean the print head: Use the cleaning tool that came with the printer or a soft cloth to gently wipe the surface of the print head to make sure the print head is completely clean. 2.

Replace the printhead: If cleaning the printhead still doesn't solve the problem, then it is most likely that the printhead is worn or damaged. You may consider contacting the manufacturer or service center for assistance with a replacement printhead.

3.Check your print settings: Sometimes semi-blank issues can be caused by incorrect printer settings.

Check that the print settings are correct, such as print paper size, print quality settings, etc., to make sure they match the paper you want to print.

The Toshiba 167 copier is a cost-effective copier, but it may fail in long-term use, so let's introduce some of the faults that the Toshiba 167 copier may encounter and how to solve them.

1.Doesn't start properly.

If the copier does not start properly, you can troubleshoot it by following the following steps:

1) Check whether the power plug is plugged in tightly.

2) Check if the power outlet is working properly.

3) Check if the photocopier is connected to a computer.

4) If the above steps cannot solve the problem, you can contact the maintenance personnel for maintenance.

2.Poor print quality.

If the quality of the documents printed by the photocopier is not good, you can troubleshoot them by following the steps below:

1) Check if the cartridge has dried up or that its service life has expired.

2) Check if the toner has accumulated too much and needs to be cleaned up.

3) Check whether the quality and size of the paper meet the requirements.

4) If none of the above steps can solve the problem, you can replace the cartridge with a new one or contact the repair personnel.

3.Paper jamming.

If the paper is jammed while printing, you can follow the steps below to perform a sail bucket check

1) Check whether the paper meets the requirements and whether it is placed correctly.

2) Check the paper feeder for any paper scraps or foreign objects blockage.

3) Check whether the conveyor roller is damaged or worn.

4) If the above steps cannot solve the problem, you can contact the maintenance personnel for maintenance.

4.There is an abnormal noise on the printer.

If the copy pin width machine emits abnormal noise, it may be due to the following problems:

1) There is a fault inside the machine, and it is necessary to contact the maintenance personnel in time for maintenance.

2) There is a problem with the cartridge or neural network and needs to be replaced.

3) The parts are badly worn and need to be replaced.

In short, in the face of these problems, we must investigate and solve them in time to prevent the impact on work and life. If we can't solve the problem by ourselves, we can contact professional maintenance personnel for maintenance to ensure that the Toshiba 167 copier can work properly and improve our work efficiency.

This kind of paper jam is nothing more than a delay in feeding, or the heating component is blocked, three situations, wipe the paper wheel, if it doesn't work, change it, if it is not a delay in feeding, remove it and add the component, see if there is any sticky powder on the iron plate at the feeding end of the heating module, and there is a transfer power dissipation problem, but it may not be big. These are the three possibilities.

Let's see if it's a paper trend, if it's not a paper problem. You can use a damp cloth to clean the paper wheel, isn't the paper stacked on the fixer? Take a look at the sensor in the fixer.

It is recommended to clean the paper wheel with a rag with alcohol. Alcohol-free can also be damp with a rag. Then you can open a new pack of paper and try it.

Causes and how to fix them:

1. A horizontal line appears in the copy caused by the reflector or flat glass.

Solution: Clean, mirror, or flat glass to make sure it's clean.

2. There are scratches on the drum core, causing a horizontal line to appear in the copy.

Solution: Replace the drum core.

Clean or change the scraper, the bottom dust or the fake powder used, or the charging contact is poor.

First of all, Toshiba's photocopier will not cause shallow copying because the toner is not there, if there is no powder, the machine will prompt, and it cannot be used directly. There are a lot of these problems, as you said. I'll tell you a few things:

1。If the carrier is not good, it will also cause light, if you don't know how to read it yourself, you can look at the number of sheets. Generally, there is no problem within 100,000.

2.If you are connected to print, you try the printing effect, if it is not light, then the scan is dirty. You take apart the scanning glass and clean the scanning light.

3.The transfer electrode wire will also be light.

4.If you have a maintenance company before, will they adjust the amount of powder on your machine? If you don't have much powder at all, it will also cause light.

Mine has appeared. Printing is normal and the copy is shallow, and the scanner and glass plate are dirty. Just open it and wipe it clean.

The overall shallow may be a laser failure, it is recommended to find a repair station.

It's hard for a number of reasons;

1: The old and new copiers (depreciation cost).

2: The coverage rate of the printed product (how much toner is printed on 8k) 3: The ** you buy consumables and spare parts.

For example: a new Toshiba 166 copier, the machine purchase **5,000 yuan, the machine life of 500,000 sheets, a toner can print 4,500 sheets, the drum and carrier can play 120,000 pieces of filial piety, toner ** 175 yuan, drum and carrier **: 1,800 yuan, a year's maintenance cost of 1,000 yuan Wang Qi's draft, a year's printing volume is 100,000 sheets.

Copy paper does not count).

500,000 sheets need 112 toners, 4 sets of drums and carriers, 112 * 175 + 1800 * 4 = 26,800 yuan.

Total maintenance cost: 5 * 1000 = 5000 yuan alongside.

Total cost: 5000 + 26800 + 5000 = 36800 yuan.

Single-sided printing cost per paper: 36800 500000 = yuan.

This cost is basically the lowest cost).

There are two reasons why multiple sheets of paper can be copied at once:

1. The paper is damp and static, so try to change the package of dry paper of other brands.

2. The paper roller is dirty or worn, and the paper roller needs to be replaced.

Replace the paper tray roller and paper separation pad.

If you're having trouble with your Toshiba 166 copier, here are a few possible ways to do it:

1.Check if the toner cartridge is left: If the print quality deteriorates or the imprint is not clear when printing and copying, it may be because the toner cartridge has run out. At this time, the toner cartridge needs to be replaced.

2.Check if the paper is jammed: In the event of a malfunction, you need to check if the paper is jammed. If there is a paper jam, you can turn on the machine, gently pull out the jammed paper with your hand, and reload it.

3.Restart the printer: Many times, some problems can be solved by restarting the vertical combustion printer. Before turning off the printer, Yu needs to make sure that the files on the printer have been saved.

4.Check the cables: If you're connecting your printer to your computer, you'll need to check that the cables are intact. If the cable is damaged, it needs to be replaced.

6.Repair service: If there are some serious problems with the printer, you may need to send it to a professional repair service center for treatment.