-
Anonymous users2024-02-08There are several possibilities for the abnormal noise of the Bailey's freezer:
1. The noise of the refrigeration system, mainly the burr at the capillary incision, the refrigerant eruption sound at the connection with the evaporator, and the possibility of various abnormal noises;
2. The working vibration of the compressor causes the pipeline to collide with the freezer parts or the freezer parts with the environmental items;
3. If the freezer has a solenoid valve, it may be the sound of the solenoid valve action (Baili freezer is just a small miscellaneous brand, which can be basically excluded).
The state stipulates that the noise of the freezer shall not be greater than 42 decibels (below 250L) Decibels (above 250L), if the noise of the freezer is harsh and affects normal life, the manufacturer can be required to repair or return it free of charge.
-
Anonymous users2024-02-07Whether it is the sound of the compressor or the sound of vibration, it is best to let the after-sales service come to check it.
-
Anonymous users2024-02-06There are many reasons why a burley's freezer is noisy, and here are a few of the main ones:
1.Refrigeration System Issues: The refrigeration system of a Baileys freezer is noisy during operation, and if there is a problem with the compressor or refrigerant in the system, the noise will increase. In this case, it is necessary to find a professional to inspect, replace or repair the refrigeration system.
2.Fan issues: In addition to the refrigeration system, fans in the freezer can also generate noise. If the fan stalls or wears out, the noise can become very loud. At this point, the fan needs to be repaired or replaced.
3.Wiring problems: The electronic wiring in the Baileys freezer, especially the control circuitry inside the freezer, can also generate noise.
If the thread is poorly designed or short-circuited, it will cause the problem of excessive noise. Adjusting the electronic wiring or replacing the wiring assembly will solve such problems.
4.Heavily worn parts: If the freezer has been in use for a long time, or if it is in regular operation, some parts may be severely worn, such as bearings, gears, etc. In this case, there will also be a problem of high noise, which can be solved by replacing these parts.
5.Improper installation: Noise can also occur when the freezer is not installed correctly, especially when the freezer is close to the wall, and sometimes the vibration sound transmitted by the wall is relatively large.
In this case, the freezer needs to be reinstalled and kept on a stable surface.
In short, the excessive noise of the freezer may be caused by various factors. It is best to find a professional maintenance engineer to check and locate the problem to quickly solve the noise problem and ensure that the freezer is running properly and quietly.
The balance lever commonly used in car modification is commonly known as "top bar, tie rod". The English meaning of bar is the meaning of pull rod. According to its different purpose and functional requirements, it is divided into five categories: front wheel suspension tower top balance rod, front bottom beam balance rod and so on.
The gearbox is also called "transmission", commonly known as: "brake box, pressure box, tooth box, gearbox, dial box, tail tooth" and other names; >>>More
The abnormal noise of the gearbox is mainly caused by loose bearing wear and abnormal meshing between the gears. >>>More
Abnormal chassis noise is generally a suspension system problem, which often occurs in a relatively large vehicle in the car, or a vehicle after an accident has been repaired! >>>More
If it is a new car, the new car disc and disc are in a run-in state, which leads to a variety of reasons for abnormal brake noise, rust in water, stones stuck in the middle of the disc and disc, and large metal particles in the brake pad. It doesn't matter as long as it doesn't affect the performance of the brakes.