What should I do if my new Tissot watch goes fast?

If you buy a new watch, you should go to the watch store with the invoice to maintain the speed and speed of the watch. Go fast above the hairspring, and make the hairspring a little longer. On the contrary, if you go slowly, you need to make the oil wire shorter.

This kind of adjustment needs to be operated by experienced and skilled watch repairers, and the layman cannot move it, and it will be scrapped if it moves.

It shouldn't have passed the three-warranty period, go for a new one or hurry up to after-sales maintenance.

There are four reasons why mechanical watches are moving faster:

1. The lubricating oil of the mechanical watch penetrates into the hairspring, or leaks, or overflows, so that the extremely precise hairspring is "sticked" together, shortening the length of the hairspring, which leads to the speed of the balance wheel of the watch to accelerate, resulting in time "running fast", this situation needs to be sent to the repair shop to the professional master to deal with, so that the hairspring can return to normal.

2. It is still a hairspring, and the hairspring is hung on the outer pile of the hairspring. Due to vibration and other reasons, the hairspring was instantly "deformed", "rubbed" on the outer pile of the hairspring and hung on it. This is the same reason as the "sticky" oil of the hairspring, which leads to the "running fast" of time.

This kind of harm is greater, and it needs to be repaired in time, and the hairspring can be "picked" away from the outer pile of the hairspring.

3. The hairspring is magnetized, and the time "runs fast" due to the contact magnetic field, and the watch can be put into the demagnetizer to demagnetize.

4. The fork pad of the escape wheel is faulty, and the kinetic energy release speed of the escape wheel cannot be effectively controlled. As a result, time "runs fast". I had to swap it out. It also needs to be sent to a professional watch store for repair.

Adhesion by magnetic field swimming. Fall, knock, violent collision, adjust the speed of the hairspring is very soft, very thin, very fine, very elastic, easy to hang on the small parts of the balance, so that the balance wheel goes fast, the watch goes fast. If the above situation occurs on the watch, it is recommended to take it to the center immediately to solve it, so as to avoid further damage to the watch after a long time.

The repair address is located in Huangpu District, Shanghai.

Room 1003, 10th Floor, Hongyi International Plaza, No. 299 Nanjing East Road.

Five common reasons for watch time error and watch time inaccuracy:

1) Insufficient power reserve: You need to check whether the dynamic force is sufficient, and the automatic right to wind a mechanical watch.

If the amount of exercise is small, it may also cause a lack of power reserve, so you can replenish the power by winding it manually, and then observe whether it continues to be fast or slow.

2) Low battery: If quartz watch.

If you suddenly find that the slowing is probably caused by insufficient battery energy, you can send the watch to a special repair point to check the battery level.

3) Hit or hit: The watch is very tight, if it is hit or hit, it may cause loose damage to the internal parts, and it may also cause the problem of running time. This is to be dealt with in a timely manner.

4) Need to maintain: The lack of oil in the movement or the wear and aging of internal parts may cause time problems, which need to be maintained, and need to be sent to the designated maintenance point for maintenance services.

5) In addition to the above common situations, the watch is affected by some ambient temperatures: if the hairspring of the watch is magnetized, the watch will not be accurate.

The Tissot watch is slowing down, first of all, see how much error there is, if it appears after a long time, it is normal.

If it slows down in a short time, it means that there is a problem with the machinery, and you need to find after-sales maintenance or debugging.

The Tissot watch is slow, probably because of a lack of power. If you are using a Tissot mechanical watch, you need to check that the power is sufficient.

It may be that the battery is not working well, or there is a problem with the internal parts of the watch.

It is relatively normal for mechanical watches to go fast and slowly, and basically all mechanical watches will have a time difference.

Go to the counter and ask, or go to the watch repair ** to ask.

What should I do if my Tissot watch is slow, of course, it is to go to the watch shop to proofread and adjust it.

1. The speed of a fully automatic mechanical watch is mainly determined by the pendulum frequency, usually the larger the swing, the smaller the pendulum frequency, and the smaller the pendulum, the greater the pendulum frequency. Generally, watches rely on the retraction and release of the hairspring to control the swing, which is the basic principle of adjusting the speed and slowness. If the hairspring is longer, the swing will increase, the frequency will be smaller, and the watch will be slower; Conversely, the more the pendulum frequency increases, the faster the watch will be.

2. The structure of the problem. Due to the gravitational pull of the earth, the offset between the horizontal position and the vertical position will produce a displacement, and the mainspring will be unbalanced from the top to the loose, and the torque will be unbalanced, and it will be affected by the external temperature, magnetic field, vibration, etc.

3. Magnetic field utility. After the hairspring is magnetized, the loops between the loops are only visible when worn, and there are sticky or brief loops, especially on the façade, the hairspring will hang down due to its own gravity, and the shaking of the arm will intensify its radial movement, resulting in a change in time.

4. The balance of the balance wheel and the balance spring, especially the balance wheel. The balance wheel is very poorly balanced, which will cause the balance wheel to change the precision of the surface at a certain swing.

Generally, the daily error of a mechanical watch is normal within 30 seconds, and if it is one minute faster a day, it will be faster.

If such a problem arises, if it is not accidentally magnetized, then it is a problem with the movement.

To solve such a problem, you must take it to a regular watch store and ask the master to check it. If it is a magnetized problem, it can be degaussed without opening the lid; If it is a problem with the movement, the back cover must be opened for repair.

The watch may be out of order, and the specific reason needs to be brought to the after-sales service center for testing.

The address of Chengdu is in Room 05, 24th Floor, Sichuan Aviation Plaza.