The optical drive gets stuck on the outside and what to do

If you know how to do it yourself, take it apart and figure it out yourself.

It's actually pretty simple inside!

My optical drive also didn't work, and after the warranty, I disassembled it myself.

Is it a *** optical drive or a CD optical drive?

The maintenance company of the computer city generally does not repair the optical drive, keyboard, mouse The optical drive belongs to the mechanical category, it will wear out, with a less life, if repaired, they charge a 10 yuan, 20 yuan is boring, and it is cheap 165 can buy a new *** optical drive, 140 can buy a new cd optical drive, if you are interested, you can repair it yourself, the rubber band falls off, and then find a optical drive rubber band to install it.

You turn off the computer, unplug the power cable and signal cable of the optical drive, and take out the optical drive, which has four screws later.

If it weren't for the broken bald head, a lot of it would be worth fixing.

The main reason for buying another one is that the optical drives are not very expensive, and there is a greater possibility of breaking down after repairing.

There is a small hole in the left of the front panel of the optical drive, find a paper clip and straighten it, poke it into the small hole, and pull the tray out so that you can take out the disc stuck inside! Then thank the screws in order, be sure to remember the order, disassemble them in turn to make up for the fallen parts, and after installing them, if not, you have to replace them with a new one!

Your optical drive is a mechanical transmission belt that is broken, so you can't get in, you can repair it yourself, but the small belt (the rubber band you said) is difficult to match. The internal structure of the optical drive is not complicated, anyway, the dealer will not repair it, so you can try it yourself.

You can take it for repairs, but you usually buy a new one.

First, the poor quality of the disc causes the disc to be unreadable, and the virus on the disc will also cause a similar situation.

Second, there is a problem with the optical drive driver, which causes a mismatch with the system and causes a computer card, so it is necessary to update the optical drive driver.

3. The aging of the optical drive may cause power supply problems, system interruption problems, and system cards, which is a better choice to replace the optical drive.

Fourth, caused by system poisoning, some viruses will seize system resources, when the optical drive reads the disk, the system needs to allocate more resources to the optical drive, and the two affect each other to cause the card situation. Consider anti-virus or reinstall the system.

Fifth, the host configuration is too low, and the system is more advanced, the software used is too much, and the antivirus software occupies too many resources, which will cause insufficient resources and cause the situation of the card, it is recommended to upgrade the hardware or even replace the host.

The above reasons are more common, and there are other similar hardware defects or failures such as insufficient power supply voltage, power distribution problems of the whole machine, etc., which will also cause the phenomenon of cards.

Take the computer to the professional maintenance department to test it, there is equipment, you can detect it, if there is a problem, replace it with a new one, there is no need to repair it. Sometimes it has something to do with the laser head, and it is less than 100 yuan to buy a new one.

1. It may be that there is a problem with the driver of the optical drive, you can delete the optical drive from the device manager and try to reinstall it, 2. It may also be that the transmission mechanism of the optical drive tray is not very flexible, so you can let the optical drive enter and exit the warehouse a few more times.

3. You can try to poke the small hole on the optical drive with a pin.

It is possible that there is a problem with the ability of your optical drive to read the disk. Adopt it.

This is due to the poor quality of the disc or the aging of the laser head of the optical drive.

When the optical drive reads some unclear areas of the disc, it is necessary to repeatedly try to adjust the position and power of the optical head in order to read the data.

1. Restart the computer and try again.

2. There is a forced warehouse hole on the optical drive panel, and the internal parts eject the pallet with the help of external force. Use a paper clip or other hard object to insert the emergency outlet hole, and a small part of the disc drive tray will pop out, and then pull out a part of the tray that pops out.

3. If you still can't open it, remove the optical drive from the computer, remove the optical drive panel, open the optical drive box, take out the disc, and then put it on as it is. Be careful when disassembling the optical drive, if you have difficulty doing it yourself, please ask someone who knows how to help.

Don't listen to them, the inhalation drive doesn't have that hole. You can only disassemble the optical drive and take it out, if you have not disassembled it, it is best to find a professional, a suction optical drive costs more than 400, be careful that you break it.

Click on the disc in my computer and right-click to pop it.

If you are stuck, I used to suck too hard to shoot before I could spit it out.

If you can't do it anymore, you can only take it apart.

Find after-sales service personnel to repair it for you!

Note that there is a small hole in the door of the optical drive, and if you poke it into it with a hard strip such as a toothpick, the optical drive will automatically pop out.

It's a restore function with a small hole, and you can pop it out by inserting something into it.