What is CuAl10Fe5Ni5 C?

Cual10Fe5Ni5 structure The metallographic structure of the ingot is A-phase + eutectic structure; The cold-pressed structure is a phase and euteclite.

CUL10FE5NI5 has many excellent properties. CUL10FE5NI5 has high strength, hardness and wear resistance, and is commonly used to manufacture gear blanks, threads and other parts. CUL10FE5NI5 has very good corrosion resistance, so it can be used to manufacture corrosion-resistant parts such as propellers, valves, etc.

CUL10FE5Ni5 does not spark under impact and can be used to make non-sparking tool materials. It has excellent thermal conductivity and stable stiffness, and has become a new type of mold material as a mold material that will not produce sticking mold and scratching the workpiece when stretching and rolling stainless steel plate heat exchanger. CUL10FE5Ni5 has a shape memory effect and has been developed as a shape memory alloy.

CUL10FE5Ni5 alloy** is relatively cheap and has become a partial substitute for some high-quality materials, such as replacing tin bronze, stainless steel, nickel-based alloys, etc. It is precisely because of the excellent characteristics of CUL10FE5NI5 that it is more and more loved and plays an important role in the civil and military industries.

CUL10FE5Ni5 Chemical Composition:

Copper Cu: Margin.

Zinc zn:

Lead PB:

Phosphorus p: aluminium al:

Iron Fe: Nickel Ni:

Silicon SI:

Impurities: 1cual10fe5ni5 Physical properties:

Density: Thermal Conductivity:

Cual10Fe5Ni5 Chemical Properties:

1. Oxidation resistance: good oxidation resistance at high temperature.

2. Corrosion resistance: It has good corrosion resistance in the atmosphere, fresh water and seawater. It has high corrosion resistance to alkali, non-oxidizing acids, phosphoric acid and sulfuric acid.

CUL10FE5NI5 Process: Molding Performance: Good plasticity at high temperature, hot working, hot forging, hot extrusion and hot bending, etc. The hot processing temperature is 850-900 degrees Celsius.

Welding performance: can be good argon arc welding, can also be used for contact resistance welding, such as spot welding, jet welding and flash welding, but not suitable for soldering and electroslag welding. If gas welding is used, the flame should be adjusted to non-oxidizing.

Cutting performance and grinding performance: The cutting performance of the alloy is 20-30%.

CUL10FE5NI5 is mainly used in the manufacture of high-strength bushings, ball seats, booster sliders, guide screws, driven shafts, support rings, fuel distribution valves, connecting rods and nuts for aircraft landing gear driven barrels and auxiliary structures.

I don't know much either, but the chemical formula should be an aluminum-copper alloy, which is a bit like bronze.

CUL10NI belongs to the German standard aluminum-nickel bronze, according to the following standard: DIN 1714-1973 copper-aluminum casting alloy (aluminum-bronze casting).

The chemical composition of CUL10Ni is shown below

cual10ni application.

It is suitable for building materials that require high strength and resistance to seawater corrosion and vortex damage. Worm gears and worms that require high strength and good lubrication to prevent limescale formation. Shafts, screws, friction parts, bushings, guides for the water conservancy and paper industry.

According to the Kim Dachang spectrum: the composition Cu: Margin Al: Mn3 is mainly used in ships.

cual10ni5fe4 aluminum bronze code:

Standard: DIN +19665-1983

Chemical composition: Grade: cualfemnnipbzn impurity, zcual10ni5fe4 remainder.

CUL10Ni5Fe4 corresponds to aluminum-bronzeAluminum-bronze is a copper-based alloy with aluminum as the main alloying element. The aluminum content is generally not exceeded, and sometimes an appropriate amount of iron, nickel, manganese and other elements are added to further improve the performance. Aluminum bronze can be strengthened by heat treatment, its strength is higher than that of tin bronze, and its resistance to high temperature oxidation is also better.

It has high strength + good wear resistance + is used for screws, nuts, copper sleeves, sealing rings, etc. with relatively high strength, and the most prominent feature of wear-resistant parts is its good wear resistance. For the aluminum bronze containing iron and manganese elements, it has high strength and wear resistance, and can improve the hardness after quenching and tempering, and has good high temperature corrosion resistance and oxidation resistance, and has good corrosion resistance in the atmosphere, fresh water and seawater, and the machinability is acceptable, and it is not easy to weld fiber welding, and the hot state is well processed under pressure. At present, our country has produced energy.

Special: This mainly refers to aluminum bronze with an aluminum content of more than 15% or less. The elemental composition except for aluminum is not much different from that of ordinary aluminum bronze.

Because of the difference in aluminum content, special aluminum bronze has higher strength than alloy steel and is close to the hardness of alloy steel. It is widely used in force structure parts, transmission parts, etc. In addition, because of its good corrosion resistance, compression and wear resistance, it is also used in the transmission shaft gears of high-speed trains.

CUL10Ni5Fe4 belongs to aluminum-nickel bronze, corresponding to the Chinese grade QAL10-4-4

The full name of CUNI 90 10 C70600 belongs to the American standard copper-nickel alloy material, and the implementation standards are as follows:

ASTM B111 B111M-2018 Standard for Copper and Copper Alloy Seamless Condenser Tubing.

ASTM B 122 B 122M-2006 Standard Specification for Copper-Nickel-Tin Alloys, Copper-Nickel-Zinc Alloys (Nickel-Silver), and Copper-Nickel Alloy Plates, Sheets, Strips, and Rolled Bars.

ASTM B151 B151M-2005 Standard Specification for Copper-Nickel-Zinc Alloys (Nickel-Silver) and Copper-Nickel Bars and Bars.

ASTM B171 B171M-2012 Standard Specification for Copper Alloy Plates and Sheets for Pressure Vessels, Condensers and Heat Exchangers.

ASTM B466 B466M-2009 Standard Specification for Seamless Copper-Nickel Tubing.

C70600 copper-nickel alloy has good corrosion resistance to clean or polluted seawater and river water, and is widely used in heat exchangers that use seawater in power stations, desalination, petrochemical plants, etc.

The chemical composition of C70600 is as follows:

CUNI 90 10 mainly refers to the ratio of copper content to nickel content of 90:10, this ratio usually refers to the American standard C70600 material, which is a copper-nickel alloy, and the corresponding domestic material is B10 material.

C70600 nickel cupronickel.

Chemical Composition: Copper Cu: Margin.

Nickel + Cobalt Ni + Co:

Tin sn:

Zinc Zn: Pb Pb:

Phosphorus P: Iron Fe:

Manganese mn:silicon si:

Sulfur : C:

Note: Impurities).

Mechanical properties: tensile strength b (mpa): 275

Elongation δ10 (28

Specimen size: thickness

Heat treatment specification: casting temperature 1330 1350; annealing temperature 780 810 ; Extrusion hot processing temperature 900 960 ; Low temperature annealing temperature for internal stress relief 250 300 °C.

C70600 alloy has good resistance to seawater corrosion and marine fouling and biological attachment, excellent fabrication and welding properties, high resistance to hydrogen embrittlement and good low temperature properties.

Applications. C70600 alloy is mostly used in marine, chemical, petrochemical and shipbuilding industries, and is the main force of copper-nickel alloys for seawater pipelines and marine systems.

CUN90-10 is a copper-nickel alloy with a main chemical composition: Cu content of about 90%, Ni content of about 10%.

B30 high-quality bars are spot sales of copper-nickel alloy forgings.

C70600 copper-nickel alloy bars, straight pipes, pipe fittings sales manufacturers, C71500 copper-nickel alloy bars, straight pipes, pipe fittings manufacturers, CU90-NI10 copper-nickel forging plate high-quality manufacturers, special alloys for ship nuclear powerCU70-NI30 copper-nickel forging plates, high-quality manufacturers, special alloys for marine manufacturing.

The full name of CUNI 90 10 is C70600, which belongs to the American standard copper-nickel alloy, corresponding to the Chinese grade B10 90% copper and 10% nickel.

C70600 nickel cupronickel.

Chemical Composition: Copper Cu: Margin.

Nickel + Cobalt Ni + Co:

Tin sn:

Zinc Zn: Pb Pb:

Phosphorus P: Iron Fe:

Manganese mn:silicon si:

Sulfur : C:

Note: Impurities).

Mechanical properties: tensile strength b (mpa): 275

Elongation δ10 (28

Specimen size: thickness

C725 copper alloy is a Cuni90-10 alloy with about 2% tin added and is mainly used in the manufacture of elastic elements. C725 copper alloy is characterized by its elastic strength and excellent stress relaxation properties under Springhard conditions, good corrosion resistance and high softening temperature. After the cold forming process, the material is tempered to achieve a more desirable elasticity.

Uses: Age-hardening alloys for plug-in connectors, power transistor connectors and semiconductor component system carriers Relay reeds Stamping and bending parts Semiconductor carriers, plug-in connector pins System carriers, vehicle electronic equipment Shanghai Ai Ai Ai metal materials, dedicated to your service.

CUL10FE5NI5 belongs to the German standard aluminum-nickel bronze, which implements the standard.

din en 1982-2016

CUL10FE5NI5 is used in bearings, pawls, worm gears, mechanical parts, spur gears, heavy warehouse worm gears, pump components, landing gear.

Parts, valve trains, valve guides, valve seats, bearings for the steel industry, high-strength clamps.

Bushings, valves, gears.

The chemical composition of CUL10Fe5Ni5 is shown in the following figure:

Summary. CUA19Ni5Fe3 is made of copper alloy and is an alloy product.

CUA19Ni5Fe3 is made of copper alloy and is an alloy product.

Isn't it stainless steel.

No. Brass tube, wall thickness 1mm, outer diameter 25mm, how to calculate the weight per meter.

Outer diameter minus wall thickness.

Then multiply by 1 meter using the formula for the area of the circle.

25-1*The formula for a circle*1.

Oh, yes. Don't multiply the density.

Yes, volume density.

Can I help calculate the penultimate number.

II. 3. The weight in the fourth box.

No.

Summary. ZCUL10FE5Ni6 is an aluminum-copper alloy material, which is mainly composed of aluminum, copper, iron, nickel and other elements. Among them,"z"Represents the aluminum element,"cu"Represents the copper element,"al"Represents the element of aluminum, and the following numbers indicate the percentage of each element.

Therefore, ZCUL10FE5Ni6 contains about 10% aluminum, 5% copper, and a small amount of iron, nickel and other elements. This alloy has the characteristics of high strength, high electrical conductivity, and good corrosion resistance, so it has been widely used in aerospace, automotive, shipbuilding, electronics and other fields. In the aviation industry, this alloy is often used to make engine parts, fuselage structures, and other components.

What is the material of zcuzn25a16fe3mn3?

ZCUL10FE5Ni6 is an aluminum-copper alloy material, which is mainly composed of aluminum, copper, iron, nickel and other elements. Among them,"z"Represents the aluminum element,"cu"Represents the copper element,"al"Represents the element of aluminum, and the following numbers indicate the percentage of each element. Therefore, ZCUL10FE5Ni6 contains about 10% aluminum, 5% copper, and a small amount of iron, nickel and other elements.

This alloy has the characteristics of high strength, high electrical conductivity, and good corrosion resistance, so it has been widely used in aerospace, automotive, shipbuilding, electronics and other fields. In the aviation industry, this alloy is often used to make engine parts, fuselage structures, and other components. <>

ZCUZN25A16FE3Mn3 is made of copper alloy.

What is zcual10fe3?

ZCUAL10FE3 is an aluminum-copper alloy material, which is a type of aluminum-bronze alloy. Among them, Z represents the casting material, Cu represents the copper element, Al represents the aluminum element, Fe represents the iron element, and 3 represents the content of the aluminum element in the material is 3%. ZCUL10FE3 aluminum-copper alloy has high strength and hardness, excellent corrosion resistance and fatigue strength, and is widely used in aviation, aerospace, automobile, shipbuilding, machinery manufacturing and other fields.

What is the material of zcual10fe3m2?

ZCUAL10FE3M2 is made of aluminum-copper alloy.

ZCUAL10FE3M2 is made of aluminum-copper alloy.