What kind of computer is good for learning environmental art???????

I recommend that you use a desktop computer, we need to render 3DMax CAD and other drawing software, which will be very slow with a laptop. At the same time, the heat dissipation of the notebook is a big problem, if it is hot, it may take too long to produce the picture, resulting in a crash...So you're miserable, and all the stuff you've made is gone.

If you want to use this book, and you want to have a good effect, you need a budget of 10,000.

I'm the same professional as you, I spent 7000 to install a computer myself, which is absolutely enough.

Apple's words. It's expensive, I didn't pay much attention to it. You can do it yourself.

It is recommended that the copy of the A card.

If you buy this book, thinkpade420

There are more desktops

Students of environmental art are required to be all-rounders. I think it's hard to mix without one. Tell you about my experience.

To make renderings, you must learn 3DMAXVR, don't rely on sketch masters.

PS must be at the ash level, and the knowledge of layer masks must be understood.

It's right for you to learn PS first as soon as you enter school, you are very diligent, and it is also very necessary, start with PS first.

CAD is a necessary skill, learning other software of environmental art will not be very normal, everyone has limited energy, but if CAD is the job of environmental art, but the school will generally teach, do not learn by yourself, because it is too boring, self-learning ps is also more difficult to have the meaning of Wang sedan car, you can p some pictures to play.

If you have mastered the above software about the same, (in fact, there is no need to be proficient, but to be able to shoot, because there are not too many projects to do in school, so the software can be used on the line, and the in-depth study will be forgotten quickly) then I strongly recommend you to learn a software indesign, is a typesetting software, the display board and atlas of environmental art is very important, this software can greatly improve the efficiency of your typesetting, do not use ps to typeset, ps is a bitmap processing software, typesetting is very clumsy to use. In school, the scheme is done in three points, seven points in a row, Huanyi must understand graphic design, and the road will be wide in the future!

Learning this design involves 3D rendering, and 3DMAX software is a bit demanding on computer hardware configuration.

3DMAX software still has certain requirements for computer configuration, but the configuration parameters are not absolute, the following are suggestions:

CPU: 3DMAX relies on the CPU for rendering. That is, the more cores in the CPU, the faster the rendering speed. The economical and affordable E3 1231 v23 is the first choice.

Radiator: Xuanbing 400 or Tower 3 Deluxe.

Graphics card: If you don't play games, you can use Litai K620 (professional-grade graphics card), both gaming and drawing, you can use GTX960 or higher GTX970

Motherboard: Because the CPU of E3 cannot be overclocked, it is natural to choose the motherboard of the B85 chipset, and the ATX board is given priority for heat dissipation and wiring.

Memory: DDR3 1600 8G is basically sufficient, the budget is enough to upgrade to 16G, and the dual channel of the two strip subgroups works best.

Hard disk: 7200 to 1TB Seagate or Western Digital HDD, you can add a 120G SSD to improve the read and write speed of the computer.

The power supply of the chassis (ATX mid-tower chassis) (rated above 450W) is suitable, and the appearance is based on personal preference, and the optical drive is optional.

Hello! You just need to get a few key configurations in place:

CPU: P4 (or AMD 3000+, AMD is cheaper, the quality is almost the same.)

RAM: at least 1G (important).

Graphics card (discrete): 512m (important).

HDD: 80-160g

Monitor: It is highly recommended that you use LCD 19 inches or more. Rationale:

Last year, I bought a flat one (Samsung 17 inches), it felt very average, and I sold it at a low price after half a year, reason:

1. It's too small, 17 inches, not convenient for the graphic area, and you always have to drag it back and forth with the gripper tool. Therefore, whether you buy LCD or flat flat, you must first buy more than 19 inches.

2. We do design, especially environmental art design, and often use 3D modeling, which is a very time-consuming job, and it often takes a whole day to do it. With my previous Samsung Flat, I got my eyes hurt and I was dizzy after half a day. The next thing is to endure it.

At the end of the work, the muscles of the whole face were almost hard. It can be seen that its radiation is harmful to people.

3. I am a designer, and I always have a bias against desktops, and I think that LCD has a personality. You say that as soon as you sit down, you always face something you don't like very much, who can stand it.

4. From the perspective of economy and environmental protection, although liquid crystal is more expensive than pure flat, but in terms of energy consumption, pure flat is not as good as liquid crystal, the former is tens of hundreds of w, and the latter is a few w.

So, I bought an LCD one a while ago, and I was very satisfied, it was AOC (AOC 19 inches.

197p + professional grade 1950 yuan.

No invoice), made in Taiwan, it is specialized in making liquid crystal displays, and many brands of night warp displays in the world are made by him, such as Fei Li Spectrum, but Fei Li Spectrum has been acquired by it. The fly in the ointment is that I bought it expensive, and on the day I bought it, I checked it online in Shenzhen and sold it for 1680.

For more details, please refer to what I answered.

If you buy this one, you can buy the normal one, and you can also buy the good one, but it is more expensive.