The flute has bB in the fourth hole from top to bottom, and there is F under the sixth hole, which m

Your statement is wrong, for the six finger holes of the flute, it should be counted along the tail of the flute in the direction of the mouthpiece. So it should be marked with F next to the first hole and BB next to the third hole.

If the diameter of the flute is thicker and the body is longer, it is called a BB bass flute; If it has a thin diameter and a short body, it is called a BB flute (although the former is more likely, because the BB is a special flute and non-professionals do not need such flutes).

However, whether it is a bass flute or a small bang flute, it is not suitable for beginners to learn, at least the fingers are not flexible: because the distance between the sound holes of the BB bass flute is large, the learner will feel that it is very difficult to pick up the flute, and playing the big flute has strict requirements for the player's breath grasp, so beginners may not even be able to blow; The distance between the sound holes of the BB key Xiaobang flute is very small, and it is not convenient for beginners to play (because the sound hole is not pressed tightly, which will lead to inaccurate pronunciation and strange timbre), and the treble part is difficult to play, and the requirements for the mouth wind and mouth strength are very high, so the sound made by the small Bang flute will be very harsh and noisy, making others unbearable.

Each flute can play 12 different keys, and the following five fingerings are commonly used (take the BB key you call for example):

1=bb (5);

1=be (2);

1=d (1);

1=c (6);

1=f (3).

As another suggestion, beginners generally learn the E or F flute, because their vocal range is close to the vocal area, and it is easier to coordinate in terms of breath and physiology (fingers).

- The above are all typed word by word according to my own experience, and they are definitely not copied and pasted from somewhere else.

Try this.

Here's what you want to know.

B or E denotes Baroque fingering. The recorder is usually an eight-hole instrument and is a series of instruments, and there are five types of instruments that are commonly used: sopranino, soprano or descant, alto or treble, tenor and bass. By forming a band of these recorders, you can play a variety of **.

The "six-hole recorder" is a combination of the recorder and the bamboo flute, a traditional Chinese instrument, and the fingering is quite different from the "eight-hole" recorder.

The recorder is also a 12-temperament instrument, which can be transposed arbitrarily, with a range of more than two octaves, and is extremely expressive. Therefore, learning the recorder, like learning any Western musical instrument, can effectively cultivate people's fixed pitch concept and effectively improve people's professional quality.

Writing a b or e near the back hole of the recorder means that it is baroque fingering, which is English fingering... If you write a g, it stands for German fingering... There are only two keys of F and C, and they can be transposed at will, playing the chromatic scale...

The Baroque recorder is divided into super treble, treble, alto, tenor, bass... At present, the world's professional recorder is the Japanese Yamaha, Aulos, and the German Moeck wooden flute, you can come to my space to see the knowledge about the recorder, and you are welcome to have any questions.

The one with B is not in a key, and the B one means that your one is Baroque (British), and the recorder is divided into German and Baroque, and the recorder is a 12 equal temperament instrument, which can be transposed at will, and LZ has to learn Baroque fingering.

lz gives points.

It depends on what tune you play. Different tones represent different tones for each hole, and there are subtle differences in fingering.

Under normal circumstances, the more commonly used blowing method of the six-hole flute is to press all to 5 or all to press 2, that is, the barrel tone is usually 5 or the cylinder sound is 2. In addition, there are also blowing methods such as 1, 3 or 6. This depends on the specific score to determine the key to be used, because each key contains a different range, and if there are notes outside the range of the score, you can't blow it, so choose a suitable key.

Therefore, the vocal range of the flute is limited, and not all scores can be played with the flute. Therefore, Mr. Zhao Songting once tied several flutes together to make a row of flutes to play, which expanded the range of the flutes and could play more songs.

Generally speaking, the 5 of the cylinder is the majority. Novices can start with the fingering of the cylinder note of 5, which is a small gong tune.

We say that the first few holes of the flute are arranged with the flute blowing holes facing upwards and from the bottom to the top. Some flutes have a few more independent holes at the bottom of the flute that are used for pronunciation holes and pendants, and under normal circumstances, there are two pronunciation holes and two holes for tying pendants, but this is not necessary, and not all flutes have them. The six holes that need to be pressed by the fingers are lined up from the bottom to the top.

That's it, just sift through a fingering chart and process it, and practice on the fingering chart. In fact, some tones are not so strict in fingering, such as the alto 5 of the small gong tune, it is also possible to blow according to the full press, the airflow is the key, and the treble 5 is easier to blow with the sixth hole. When it is ripe, it will naturally feel it.

Six-hole flutes commonly used fingering tables.

ls is referring to the fingering and it is the fingering of the whole cylinder as 5. There are flutes in different keys, and next to the third hole there is a flute marked with what tune it is. As for fingering, there are various flute tutorials, and you can learn it by yourself, but it is best to find a teacher to teach it

Fingering of the flute: left hand on top and right hand on bottom. From top to bottom, the six holes are held down with the left index, middle, and ring fingers, and the right index, middle, and ring fingers, respectively. The tones corresponding to each hole of the flute are as follows:

1. When blowing 1 tone, do it, release the three fingers of your right hand, and hold all your left hand.

2. When blowing 2 tones, that is, re, fingering to maintain the posture of 1 tone, and then release the left hand to sell the ring finger.

3. When blowing 3 tones, that is, mi, fingering to maintain the posture of blowing 2 tones, and then release the middle finger of the left hand, that is, only hold down the left index finger.

4. When blowing 4 tones, that is, FA, only press and hold the middle finger and ring finger of the left hand, and let go of the rest; Or blow while holding the middle and ring fingers of your left hand and your right index finger.

5. When blowing 5 tones, that is, so, hold down all the fingers of both hands or only release the index finger of the left hand, and hold down the rest.

6. When blowing 6 tones, that is, la, only release the ring finger of the right hand, and hold down all the remaining fingers.

7. When blowing 7 tones, that is, xi, keep 6 tones with your fingers and release the middle finger of your right hand.

Six-hole flute F tune, barrel.

The white sound is 5, and the treble is du

zhi can blow 123456, bass 567.

Flute high and low pitch master.

If it is controlled by the breath and fingering of the mouth tone, when blowing back the low answer, the mouth tone is more amplified and the exhale is slower than when the middle is blown; When playing the high notes, the mouth should be tighter than when blowing the alto, and the force is greater than that of the alto, so that the breath can enter the blowing hole more quickly.

Mainly in the breath, blowing the bass is softer, and the treble airflow is stronger.

The bass blows slowly, and the treble blows sharply.

Summary. 1. The six empty holes from the bottom hundred to the top are one hole, two holes, three holes, four holes, five holes, and six holes, respectively, with the right ring finger, middle finger, index finger and right hand ring finger, middle finger, index finger to hold, the left hand on the right hand and the right hand down.

2. Press all the fingers, and the sound is 5; Release the ring finger of your right hand and make a 6 sound; Release the ring finger and middle finger of the right hand, and gently blow out a note of 7; Release your right hand, and know that the rapid sound is 1 for the high note, and the flat is 1; Release the right hand and the left and right ring fingers, and the tone is 2; Press and hold only the index finger of the left hand and the tone is 3; Release your left and right index fingers, hold down the rest, and gently blow 4.

Six-hole recorder fingering f c g d b e key to! Urgent.

1. Six empty holes from the bottom to the top are one hole, two holes, three holes, four holes, five holes, six holes, and divide the forest things with the ring finger, middle finger, index finger of the right hand and the right hand nameless finger, middle finger, index finger to hold, the left hand on the right hand and the right hand down. 2. The fingers are all pressed and touched, and the sound is 5; Release the ring finger of your right hand and make a 6 sound; Release the ring finger and middle finger of the right hand, and gently blow out a note of 7; Release your right hand, and know that the rapid sound is 1 for the high note, and the flat is 1; Release the right hand and the left and right ring fingers, and the tone is 2; Press and hold only the index finger of the left hand and the tone is 3; Release your left and right index fingers, hold down the rest, and gently blow 4.

def tune recorder where to buy. **。

Take the key of F as an example:

The flute is usually played with the third hole as 1 and the barrel note as the bass 5. Open the first in turn from bass 5.

1, 2, 3, 4 and 5 sound holes, which can blow out six tones: bass 5, bass 6, bass 7, middle 1, middle 2 and middle 3;

Alto 6, Alto 7, Treble 1, Treble 2, and Treble 3 are also blown with the same fingering and with greater force. When blowing 4 notes, the sixth and first.

The second and third sound holes are opened at the same time, and the first and the first are closed.

Fourth, pentatonic holes. Treble 4, open the sixth and first sound holes, and close the other sound holes.

Open the sixth sound hole of treble 5, close the other sound holes, and blow hard. Blow the treble 6 opener.

1. Four sound holes, other sound holes are closed. Blow the treble 7 opener.

Second, the pentatonic hole, the other sound holes are closed. Then treble 1 opener.

2nd, 3rd, 4th, pentatonic holes, 1st.

1. The six-tone hole is closed.

Different keys are not the same, if you count from the tail upwards, the general tone is marked in three or six holes, such as d, a key, a is six holes, d is three holes, if you choose the score of d key, then three holes are 1, four holes are 2, five holes are 3, six holes are 4, all closed 5, one hole is 6, two holes are 7, as for the high and low tones are in the same hole, controlled by the mouth wind; If it is a spectrum in the key of A, then six holes are 1, total closure is 2, one hole is 3, and so on... The fingering of the six-hole flute is basically the same as that of the horizontal flute, but the six holes are moved to the position of the thumb, that is, the first 5 and the last one generally use 3 and 6 holes to mark the tone, but you can also blow other tunes, for example, the hole of A key when 1 is equal to 3 of C key. If you want to change the tone, the basic principle is the same, but the two tones of 4 and 7 should be noted, and it will be relatively difficult to blow according to the half-hole, that is, the way of raising and lowering the half-tone.