I want to transfer data after connecting two computers with a peer cable, what should I do?

You're talking about connecting two machines with a crossed twisted pair.

1.Set the IP to a (this book) subnet mask:

b (old machine) Subnet mask:

Gateways are. 2.Put what you want to pass in a folder and set this folder to Share3On your laptop, open Neighbor - search --- enter the IP set on the original computer (B).

You will be able to copy these files.

The notebook should be auto-flipping.

The two machines should be connected with an anti-teaching line).

One is set on the other.

Turn off the firewall.

At the point where the IP is the machine starts running hit enter to see if you can see the files shared on 2.

In the same way, if you play on 3, you will see that 3 is shared.

I always use a small piece of software to transmit (the speed can reach as fast as 20m. I searched for a long time to find it). You can also try changing the first three digits of the IP address to the same.

The working group was also changed to the same thing. Then share. But I tried it once.

Email me if you want the software.

It's very simple, you can directly connect two computers with a network cable (ordinary network cable, don't cross it!). At the beginning, there was no router and no network, which is what it did, and it was possible to play CS on the local area network, transmit movies, etc.!

If you don't need software, you can share the folder you want to transfer from your computer, open the guest account, and type "If B accesses a computer file" in the address bar) or find it directly from your online neighbor.

Or use a router (you can transmit without disconnecting from the network).

Use a network cable, but it has to be a cross line, one end is 568a, one end is 568b, the specific line sequence is found on the Internet, and then the two computers are set to the same group, such as our commonly used workgroup, the two computers must also be set to the same network segment, such as both. This method is the most stable and reliable way to transmit data.

There is a network that can be connected to the online neighbors.

This line is used to connect to the mobile hard disk, there is a chip in the middle of the line used for communication, and the driver is also installed, it is recommended that you use an 8-core network cable, as long as there is a network card for this communication, you can also use the hub to connect multiple computers, and in most cases, LAN games are connected by the hub.

Directly make a network cable plugged into the network card of two computers, and then open computer A "Internet neighbor", you can see the computer name of computer B, double click the computer name, you can see the shared directory or drive letter, click in, you can carry out all kinds of operations. (Directory or drive letter sharing: Right-click on the directory, select "Share", and confirm).

Note: Two computers are connected directly not the same as they are connected through a switch. What you asked, you need to make a crossed line, the specific method is to use the T568A standard at one end of the network cable, and the T568B standard at the other end: the method is as follows.

A standard: green and white green orange white blue blue and white orange brown white brown and white brown b standard: orange white orange green white blue blue and white green brown white brown (in the industry popular saying is to make the 1st and 3rd, 2nd and 6th lines at one end of the finished to make the other end, that is, to make a dual-machine interconnection cross line).

There are many ways to exchange data between two computers.

2. If the two computers are physically close to each other, you can use U disks, mobile hard disks and other peripherals to copy data;

3. If the amount of data is large, such as tens of terabytes, you can directly copy data from hard disk to hard disk under one system by mounting multiple hard disks;

4. If it is in the LAN, the data can be transmitted in the way of LAN sharing.

1. Make a peer-to-peer network cable, which can be connected and transmitted;

2. Use LAN software, such as network people;

3. Set up a LAN, the family can generally go through the router, and then set up sharing, or use FTP

Whether the two computers are connected to the Internet at the same time (i.e., connected to the Internet).

If you don't have one, you need to make a network cable to connect the two computers.

The advantage is that you can directly connect the two machines without going through other network equipment, and it is generally only used to connect two machines and neither machine is connected to the Internet. The detailed method is as follows: One end is in positive order, and the other end is in reverse order:

The line sequence of the normal sequence (standard network cable): 1, white orange, 2, orange, 3, white green, 4, blue, 5, white blue, 6, green, 7, white brown, 8, brown. Note that both ends are in the same line order and correspond one-to-one.

This is the wire standard of 100M network cable, that is, the T568B standard, which is what we usually call the positive line or standard line.

The reverse order is also the T568a method: 1, white-green, 2, green, 3, white-orange, 4, blue, 5, white-blue, 6, orange, 7, white-brown, 8, brown.

After doing a good job, directly plug in the network card of the two machines, and then manually set the network card IP, and the two machines can be set in the same IP segment, for example: computer 1 computer 2 subnet mask is the gateway can not fill in or add the other party's IP number, DNS do not care, that is the resolution of the domain name when surfing the Internet.

In this way, the two machines can be connected to each other.

Connect with a reverse cable, one crystal head for T568A, one crystal head for T568B, connect the two computers to the ground together, and the IP of the two computers should be matched with the same network segment.

A network cable, after connecting, set up a remote desktop, you can test things.

Wires that can be directly connected to each other: one end is: green-white-green, orange-white-blue, blue-white-orange, brown-white-brown.

There is also a one: orange-white-orange, green-white-blue, blue-white-green, brown-white-brown.

The computer group needs to be set up in the same way.

The network cable is 568a at one end and 568b at the other

Set to the same IP segment for the same workgroup.

Nowadays, the network card is very popular, and the network cable is used without adding any equipment, but it must be a cross line, and then the IP is set, and the neighbors can access each other on the Internet, which actually constitutes a local area network.

IP: Example 1: Mask:

Example 2: Mask:

There are two kinds of network cables, one is a direct connection line, and the computer is connected to the switch.

Computer-to-computer uses cross-wires, and LAN-to-LAN switches also use cross-wires. Two pairs of lines, one receiving, one serving.

To what was said upstairs, I will add again,1. Both computers should have network cards.

2。Buy a peering cable, which is used to transfer data between computers and computers.

3。Set both computers as one workgroup, (My Computer --right-click --Properties--Computer Name).

4。Set the IP addresses of the 2 computer computers, e.g. upstairs and 5. In addition, it is better to have the same system for these two machines, for example, one is an XP system and the other is 2000, then there may be some things that need to be set up in between.

Define the IP and gateway by yourself, if you are not connected to other machines, it is recommended to set the IP of one machine as the subnet mask gateway and the other as the subnet mask gateway.

The twisted pair cable of the dual-machine direct NIC interconnection is different from the network cable of the ordinary NIC connection hub, and it needs to be miswired, and the production method is as follows.

If you hold the crystal head with your left hand, you can see the 8 pins in the connector when the side with the shrapnel is facing down, the side with the metal plate facing up, and the jack of the wire head facing the right-hand side.

After the misalignment, one side is: white orange, orange, white green, green, white blue, blue, white brown, brown; On one side: white-green, blue, white-orange, green, white-blue, orange, white-brown, brown.

The settings of the network card are nothing important Auto can do it,,

Go buy a network cable and tell the boss to make it a crossover.

Connect the network cards of the two computers with a crossover cable.

Set the IP addresses of the two machines to sum.

Make a peering cable. The method is: aOrange white, orange, green white, blue, blue and white, green, brown white, brown.

b.Green-white, green, orange-white, blue, blue-white, orange, brown-white, brown-white.

Then set up the protocol, add the IP address, and don't forget that the working group should be the same.

Directly connect the network cable to the network port, and you're good to go.

Dual-machine interconnection solution:

Find a normal network cable and plug it into the network card of 2 computers.

Turn on 2 computers to set it up.

A machine settings: find the local connection Set a fixed IPB computer settings: find the local connection Set a fixed IP and turn off the firewall of the 2 computers Turn on the guest so that you can share files for transfer.

Buy network cables and other necessary equipment to establish a LAN This is very troublesome There is this money and energy to buy an 8G U disk or 4G The read speed of the hard disk is tens of m If you use the local area network, you may not have this speed It is recommended to use a U disk Today's electronic information development makes mobile devices have a strong advantage This saves money and effort, and a large U disk will also be very useful in the future I hope the landlord will adopt.

1. If the computer is relatively old, it is generally used to directly connect two computers with a cross line, that is, the network card - network card;

2. If it is a new computer, it can be connected with a direct connection line or a cross cable, because modern network cards are adaptive and can automatically adjust the channel of data transmission.

3. The two ends of the line sequence of the direct connection are: white orange - orange - white green - blue - white blue - green - white brown - brown;

4. The line sequence of the crossing line, one end is: white orange-orange-white-green-blue-white-blue-white-blue-green-white-brown-brown, and the other end is:: white-green-white-orange-blue-white-blue-orange-white-brown-brown.

Use the crossover sequence to make a network cable (1326 modulation) and manually specify the IP address in a network segment. Start the server service, enable guest, and remove the admin login password. Within a working group.

Run the Network Setup Wizard (Control Panel Network Connections, Files Network Setup Wizard) on each of the 2 computers.